W rozrywce samochodowej
Porównanie cen
Najlepszy
Ground Zero Iridium GZIW 165 6.5 inch subwoofer
322.77 PLN
Iridium GZIW 165 is a 6.5 inch (16.5 cm) Subwoofer from Ground Zero with Klippel optimized construction and HQPP membrane with 3D structure. Equipped with a 38 mm copper voice coil, durable rubber surround, polycot centering, resonance-optimized steel basket, and pressure contact connection. The impedance is 4 Ohms, Re 3.6 Ohms, the resonance frequency is 41 Hz; Qms 10.70, Qes 0.43, and Qts 0.41. Vas 9.1 liters, Le 1.59 mH, Mms 40.4 g, and BL 9.46. The linear excursion Xmax is 10 mm, the efficiency is 85.5 dB (1 W/1 m). The RMS power handling is 100 Watts, the recommended amplifier power is 60 to 150 Watts. Dimensions: outer diameter 168 mm, cutout diameter 147 mm, mounting depth 79 mm. Features 6.5 inch (16.5 cm) Subwoofer Klippel optimized 38 mm copper voice coil Durable rubber surround HQPP membrane with 3D structure Polycot centering Resonance-optimized steel basket Pressure contact connection Technical Specifications Impedance 4 Ohms Re 3.6 Ohms Fs 41 Hz Qms 10.70 Qes 0.43 Qts 0.41 Vas 9.1 liters Le 1.59 mH Mms 40.4 g BL 9.46 Xmax 10 mm Efficiency 85.5 dB (1 W/1 m) RMS power handling 100 Watts Recommended amplifier power 60–150 Watts Outer diameter 168 mm Cutout diameter 147 mm Mounting depth 79 mm
Top Pick
Audio System Carbon 165 6.5 inch speaker set
344.73 PLN
The Carbon 165 from Audio System is a 6.5 inch Speaker Set from the CARBON SERIES. This 2-way Compo System consists of the mid-bass driver AC 165 and the tweeter model CARBON TW 24. For signal distribution, the cable crossover FW CARBON is integrated. The system operates with an impedance of 4 Ohms. The power consumption is specified as 2x 120 Watts maximum and 2x 80 Watts RMS. The outer diameter of the components is 165 mm with a mounting diameter of 144 mm. The mounting depth is specified as 61 mm. Features 6.5 inch (16.5 cm) Speaker Set CARBON SERIES 165 mm 2-way Compo System Tweeter: model CARBON TW 24 Mid-bass driver: model AC 165 Cable crossover: model FW CARBON Impedance: 4 Ohms Power: 2x 120 Watts Power: 2x 80 Watts Outer diameter: 165 mm Mounting diameter: 144 mm Mounting depth: 61 mm
Doskonały
Hertz Dieci DCX 130.3 5 inch coaxial speakers Masori
221.52 PLN
The Hertz Dieci DCX 130.3 is a 5-inch coaxial speaker with a water-resistant membrane made of pressed paper and a TPU surround. The continuous power handling is 40 W RMS, while the peak power handling reaches 80 W. The system has an impedance of 4 Ohms and covers a frequency range of 65 Hz to 21 kHz. The woofer uses a high-density flux ferrite magnet, while the tweeter is equipped with a neodymium magnet and a PEI dome. The construction features built-in crossovers and a linear frequency response. The weight per speaker is 0.56 kg with a mounting depth of 59 mm. Features Product type: 5-inch (13 cm) coaxial speaker Continuous power handling: 40 W RMS Peak power handling: 80 W Membrane material: Water-resistant pressed paper Surround material: TPU (Thermoplastic Polyurethane) Dome material: PEI Woofer magnet: High-density flux ferrite Tweeter magnet: Neodymium Special features: Built-in crossovers Dimensions: A 130 mm, A3 151 mm, B 116 mm, C 59 mm, D 52 mm Technical Specifications Impedance: 4 Ohms Frequency response: 65 Hz - 21 kHz Sensitivity (Spl): 92 dB Woofer magnet size: 70 x 32 x 10 mm Effective diaphragm diameter (D): 112 mm DC resistance (Re): 3.3 Ohms Resonance frequency (Fs): 82 Hz Equivalent volume (Vas): 7 l Moving mass (Mms): 7.4 g Compliance (Cms): 0.51 mm/N Force factor (BL): 3.8 T*m Total Q factor (Qts): 0.76 Electrical Q factor (Qes): 0.93 Mechanical Q factor (Qms): 4.3 Weight: 0.56 kg per piece
Polecany
Audio System M-90.4 4-Channel Amplifier Masori
1282.85 PLN
The Audio System M-90.4 is a 4-Channel Amplifier in Class A/B technology with SMD technology. It features variable and switchable subsonic filtering as well as HP, LP, and BP filters and can be operated in full active mode. FSA (Front-Stage Adjuster) is integrated. A 3-stage efficient ON TOP fan/cooling system supports operation. The cable remote control RTC is available as an option. The connection can be made via a RCA high-level input or an adjustable signal detection with automatic power on. The output power is 4 x 90 WRMS at 4 Ohm, 4 x 160 WRMS at 2 Ohm, or 2 x 320 WRMS mono at 4 Ohm. The dimensions are 295 x 50 x 185 mm. With aluminum logo. Features 4-Channel Amplifier 4-Channel Class A/B high-performance amplifier with SMD technology Variable and switchable subsonic filtering HP, LP, BP filters Full active mode 3-stage efficient ON TOP fan/cooling system Cable remote control RTC (optional) FSA (Front-Stage Adjuster) RCA high-level input or adjustable signal detection with automatic power on With aluminum logo Technical Data 4 x 90 WRMS at 4 Ohm 4 x 160 WRMS at 2 Ohm 2 x 320 WRMS mono at 4 Ohm Dimensions: 295 x 50 x 185 mm
Wyróżniony
Hifonics Zeus ZXS6D2 6.5 Inch Subwoofer Masori
327.56 PLN
The Zeus ZXS6D2 is a 6.5 inch (16.5 cm) Subwoofer from Hifonics with 200 Watts RMS and 400 Watts max. The impedance is configured as D2 with 2 + 2 Ohms. A dual magnet with 2 x 30 ounces (2 x 0.85 kg) works with a 38 mm dual voice coil. The X-Max is +/- 14 mm. It features a stitched surround and hand-crafted, coated paper cone. A blue magnet protector is integrated. Specifications include Fs 50 Hz, Qts 0.43, VAS 6.8 L, mounting diameter 150 mm, and mounting depth 113 mm. Features 6.5 inch (16.5 cm) Subwoofer 200 Watts RMS 400 Watts max Impedance D2 2 + 2 Ohms Dual magnet with 2 x 30 ounces (2 x 0.85 kg) 38 mm dual voice coil X-Max +/- 14 mm Stitched surround Hand-crafted and coated paper cone Blue magnet protector Technical Specifications Fs 50 Hz Qts 0.43 VAS 6.8 L 84 dB Mounting diameter 150 mm Mounting depth 113 mm
Alternatywa
Audison Prima APK 165 Ohm2 6.5 Inch Speaker Set
685.17 PLN
Audison Prima APK 165 Ohm2 is a 6.5 inch (16.5 cm) Speaker Set. The 2-way system operates at 2 Ohms and includes the crossovers APCX WF 2Ω and APCX TW 2Ω with Cut Off @ 4.5 / 5 kHz. The power handling is 100 W continuous and 300 W peak. The woofer measures 165 mm with a 25 mm voice coil, Xmax 2.8 mm, and water-resistant treated paper cone. The tweeter is 26 mm in size with a 20 mm voice coil and acoustic lens with frequency response compensation in the range of 10–13 kHz. High-frequency level adjustment +2/0 and Hi-Contour function are integrated. The frequency response is 50–20k, the resonance frequency is 75 Hz, and the sensitivity is 95 dB. TPU edge with Triple Wave, reduced installation depth, compact basket with abrasion and scratch-resistant coating, and high-current quick-connect terminal with double contact and temperature-resistant cover are part of the equipment. Developed with the KLIPPEL Suite. Features 6.5 inch (16.5 cm) Speaker Set 2-way system Impedance 2 Ohm Peak power handling 300 W Continuous power handling 100 W Frequency response 50–20k Hz Two crossovers APCX WF 2Ω low-frequency crossover APCX TW 2Ω tweeter crossover with Hi-Contour function Cut Off @ 4.5 / 5 kHz High-frequency level adjustment +2/0 AP 1 tweeter with acoustic lens; frequency response compensation 10–13 kHz AP 6.5 2Ω woofer with water-resistant treated paper cone TPU edge with Triple Wave Reduced installation depth Compact basket with abrasion and scratch-resistant coating High-current quick-connect terminal with double contact; temperature-resistant plastic cover Passive crossover with integrated connection cable and Fast-on connectors; different connections per pole Developed with the KLIPPEL Suite Technical Specifications Woofer size 165 mm Tweeter size 26 mm Woofer cone diameter 127 mm Voice coil diameter woofer 25 mm Voice coil diameter tweeter 20 mm Magnet size woofer 85 x 32 x 15 Xmax woofer 2.8 mm Re woofer 2.1 Ohm Fs woofer 75 Hz Le woofer @ 1 kHz 0.15 mH Vas woofer 8.5 l Mms woofer 10.5 g Cms woofer 0.4 Bxl woofer 3.8 Qts woofer 0.63 Qms woofer 4.8 Spl woofer 95 dB Weight woofer 0.78 kg Weight tweeter 0.04 kg
Audison Prima APK 165 6.5 inch speaker set Masori
557.25 PLN
Prima APK 165 is a 6.5 inch (16.5 cm) Speaker Set from Audison featuring an AP 1 Tweeter and an AP 6.5 Woofer. The power handling includes 100 W continuous and 300 W peak at 4 Ohm impedance. The frequency response ranges from 60 Hz to 20 kHz. The AP 1 Tweeter has a 26 mm diaphragm diameter, a wideband surround, and an acoustic lens for the range of 10 kHz to 13 kHz. The passive high-frequency Crossover APCX TW is very compact and offers a damping switch with 0 dB or +2 dB; the separation of the Woofer occurs as HP at 3.5 kHz with 6 dB per octave. The AP 6.5 Woofer uses a 32 mm voice coil made of pure copper and a water-repellent treated paper diaphragm with FEM-calculated profile, optimized with Klippel Scan Vibrometer. Additional features include reduced installation depth, TPU edge with Triple Wave profile, compact and coated basket, motor fixed with epoxy glue, and high-current quick-connect terminals with double contact and temperature-resistant cover, complemented by quick connections to passive Crossovers with polarity-different ends. Developed with the KLIPPEL suite. Features 6.5 inch (16.5 cm) Speaker Set AP 1 Tweeter with 26 mm diaphragm diameter and wideband surround Acoustic lens on the Tweeter for the range of 10 kHz to 13 kHz AP 6.5 Woofer with 32 mm voice coil made of pure copper Water-repellent treated paper diaphragm, FEM profile, optimized with Klippel Scan Vibrometer TPU edge with Triple Wave profile Reduced installation depth Compact basket with abrasion and scratch-resistant coating Motor fixed with damping epoxy glue APCX TW passive high-frequency Crossover, very compact, damping switch 0 dB, +2 dB Crossover quick connections with polarity-different ends High-current quick-connect terminal with double contact and temperature-resistant cover Power handling continuous 100 W Power handling peak 300 W Developed with the KLIPPEL suite Technical Specifications Woofer size 165 mm Tweeter size 26 mm Voice coil diameter Woofer 32 mm Voice coil diameter Tweeter 10 mm Magnet size Woofer 85 x 40 x 15 Impedance 4 Ohm Frequency response 60 Hz to 20 kHz Crossover Woofer HP at 3.5 kHz, 6 dB/Okt Tweeter level adjustment +2 dB, 0 dB Cone diameter Woofer 129 mm Xmax Woofer 2.5 mm Re Woofer 3.1 Ohm Fs Woofer 80 Hz Le Woofer 0.23 mH at 1 kHz Vas Woofer 7.6 l Mms Woofer 12 g Cms Woofer 0.31 Bxl Woofer 4.7 Qts Woofer 0.7 Qms Woofer 4.7 SPL Woofer 93.5 dB Weight Woofer 0.78 kg Weight Tweeter 0.04 kg
Głośnik niskotonowy subwoofer jednodrożne JBL Stage 82 20cm 200W RMS
312.99 PLN
Subwoofery serii Stage charakteryzują się lekką konstrukcją, ale wciąż wyposażone są w polipropylenowe membrany stożkowe oraz wysokie gumowe zawieszenie, któ...
Hertz DP 2.200 2-Channel Amplifier Masori
600.13 PLN
The Hertz DP 2.200 is a 2-Channel Amplifier of Class AB. It features a High-Resolution Audio certification and a bandwidth at -3 dB from 10 Hz to 45 kHz. The amplifier is fully bridgeable with minimum loads of 2 Ohms at 2 channels and 4 Ohms at 1 channel. Adjustable crossovers with Hi-Pass full range or 50–4000 Hz at 12 dB/oct. and Lo-Pass are integrated. A balanced input circuit, preamplifier/speaker inputs, and a full-range Pre Out are available; the Pre-In sensitivity is 0.32–8 VRMS, and the Speaker-In sensitivity is 1.6–40 VRMS. ART allows automatic on/off via SPK-IN (only BTL radio) at 1.5 VDC. A status LED, a machined terminal block, and a removable top plate are included. Features 2-Channel Amplifier Amplifier Class AB High-Resolution Audio certification Fully bridgeable Minimum load 2 Ohms (2 channels) Minimum load 4 Ohms (1 channel) Bandwidth at -3 dB: 10 Hz – 45 kHz Balanced input circuit Adjustable crossovers: Hi-Pass full range / 50–4000 Hz, 12 dB/oct. Lo-Pass Inputs: Preamplifier input / Speaker input Pre Out full range Pre-In sensitivity: 0.32 – 8 VRMS Speaker-In sensitivity: 1.6 – 40 VRMS ART automatic on/off via SPK-IN (only BTL radio), 1.5 VDC Status LED Solid machined terminal block Removable top plate Technical Specifications Channels: 2 / 1 (bridged) Operating voltage: 6.5 – 16.5 VDC Nominal supply voltage (Fuse): 11 – 15 VDC Fuses: 2 x 20 A Idle current: 0.65 A Standby power consumption: 5 uA Consumption at minimum load (maximum music power): 15 A Remote IN: 4 – 15 VDC (1.5 mA) Efficiency: 60 % Distortion (THD) at 100 Hz, 70 % nominal power: 0.01 % Damping factor at 1 kHz, 1 W: 130 Signal-to-noise ratio (A-weighted at 1 V input): 100 dBA Output power (RMS) at 1 % THD, 14.4 VDC: 80 W x 2 (4 Ohms) Output power (RMS) at 1 % THD, 14.4 VDC: 110 W x 2 (2 Ohms) Output power (RMS) at 1 % THD, 14.4 VDC: 220 W x 1 (4 Ohms) Output power (RMS) at 10 % THD, 14.4 VDC: 95 W x 2 (4 Ohms) Output power (RMS) at 10 % THD, 14.4 VDC: 130 W x 2 (2 Ohms) Output power (RMS) at 10 % THD, 14.4 VDC: 260 W x 1 (4 Ohms) Total power: 520 W
Hertz Dieci DSK 130.3 5 inch speaker set Masori
340.1 PLN
The Dieci DSK 130.3 from Hertz is a 5-inch Speaker Set with a continuous power of 60 W and a peak value of 120 W. The system operates with an impedance of 4 Ohms and covers a frequency range of 60 Hz to 23 kHz. The woofer is equipped with a 25 mm voice coil and the exclusive V-Cone profile. TPU (Thermoplastic Polyurethane) is used as the surround material, while the high-frequency range is realized through a neodymium motor assembly and a PEI diaphragm. The sensitivity of the system is specified at 93 dB SPL. An integrated high-pass Crossover separates at 3.5 kHz with a slope of 12 dB/Oct. The passive filters are directly mounted on the connection cables to assist with the installation process. Features 5-inch (13 cm) Speaker Set Hertz Dieci Series Power: 60 W RMS Power: 120 W Peak V-Cone profile for the woofer TPU surround (Thermoplastic Polyurethane) Neodymium motor assembly for the Tweeter PEI diaphragm Crossover: High-pass at 3.5 kHz with 12 dB/Oct. Impedance: 4 Ohms Technical Specifications Sensitivity: 93 dB SPL Frequency response: 60 Hz - 23 kHz Voice coil diameter woofer: 25 mm Weight Woofer: 0.53 kg Weight Tweeter: 0.03 kg Weight Crossover: 0.16 kg Installation diameter (B): 116 mm Installation depth (C): 58 mm Total diameter (A): 130 mm Hole circle diameter (A3): 151 mm Magnet diameter (D): 52 mm Vas: 7 l Fs: 81 Hz Mms: 7.4 g Qts: 0.76
Audio System Carbon 130.2 2-Channel Amplifier Masori
429.41 PLN
The Carbon 130.2 from Audio System is a 2-Channel Amplifier of the CARBON SERIES. It features variable, switchable high-pass and low-pass filters as well as an EQ at 45Hz in the steps of 0/3/6 dB. The input sensitivity ranges from 0.2 to 8 volts. An RCA high-level input with automatic turn-on function is integrated. The device operates in A/B mode and achieves a power output of 2x 65 watts RMS at 4 ohms or 2x 130 watts RMS at 2 ohms. In mono operation, the amplifier delivers 1x 260 watts RMS at 4 ohms. RTC support is optionally available. The dimensions of the housing are 200x51x176 mm. Features 2-Channel Amplifier CARBON SERIES A/B operation Variable, switchable HP and LP filters RCA high-level input with automatic turn-on EQ at 45Hz with 0/3/6 dB RTC optional Dimensions: 200x51x176 mm Technical Specifications Power: 2x 65 watts RMS at 4 ohms Power: 2x 130 watts RMS at 2 ohms Power: 1x 260 watts RMS mono at 4 ohms Input sensitivity: 0.2-8 volts
Hertz DP 4.300 4-Channel Amplifier Masori
685.39 PLN
Hertz DP 4.300 is a 4-Channel Amplifier with Class-AB amplification and High-Resolution Audio certification. The bandwidth at -3 dB ranges from 10 Hz to 45 kHz, the operating voltage is between 6.5 to 16.5 VDC, and the nominal supply voltage is 11 to 15 VDC with 2 x 20 A fuses. The amplifier operates in 4, 3, or 2-channel modes and is designed for 2 Ω at 4 channels, 2 Ω + 2 Ω + 4 Ω at 3 channels, and up to 4 Ω at 2 channels. The inputs are configured as preamplifier and speaker inputs, with a balanced input circuit, adjustable input level, as well as high-pass and low-pass crossovers for front and rear. Signal-to-noise ratio is 100 dBA, damping factor is 105, efficiency is 59%, and THD is 0.015% at 100 Hz and 70% nominal power. Equipped with ART for automatic on/off via SPK-IN, Remote IN, Full-Range Pre-Outs, status LED, and removable top plate. Features 4-Channel Amplifier Channels 4 - 3 - 2 Amplifier Class AB High-Resolution Audio certification Bandwidth at -3 dB 10 Hz - 45 kHz Operating voltage 6.5 - 16.5 VDC Nominal supply voltage 11 - 15 VDC (2 x 20 A) No-load current 0.8 A Standby power consumption 5 µA Consumption, MIN-load impedance (maximum music power) 24 A Remote IN 4 - 15 VDC (1.5 mA) ART automatic on/off via SPK-IN (only BTL radio) 1.5 VDC Efficiency 59% Distortion THD at 100 Hz, 70% nominal power 0.015% Damping factor at 1 kHz, 1 W 105 Signal-to-noise ratio (A-weighted at 1 V input) 100 dBA Minimum load impedance at 4 channels 2 Ω Minimum load impedance at 3 channels 2 Ω + 2 Ω + 4 Ω Minimum load impedance at 2 channels 4 Ω Inputs preamplifier input/speaker input Preamplifier output full range (front) Preamplifier input sensitivity 0.32 - 8 VRMS Speaker input sensitivity 1.6 - 40 VRMS Front channel high-pass full range/50 - 4000 Hz 12 dB/Oct. Front channel low-pass full range/50 - 4000 Hz 12 dB/Oct. Rear channel high-pass full range/50 - 4000 Hz 12 dB/Oct. Rear channel low-pass full range/50 - 4000 Hz 12 dB/Oct. Bass Boost 50 Hz 0 - 9 dB Balanced input circuit Adjustable input level Automatic on/off function Full-Range Pre-Outs Status LED Removable top plate Technical Specifications Output power (RMS) at 1% THD, 4 channels at 4 Ω: 60 W x 4 Output power (RMS) at 1% THD, 4 channels at 2 Ω: 85 W x 4 Output power (RMS) at 1% THD, 3 channels at 4 Ω: 60 W x 2 + 170 W x 1 Output power (RMS) at 1% THD, 3 channels at 2 Ω / 4 Ω: 85 W x 2 + 170 W x 1 Output power (RMS) at 1% THD, 2 channels at 4 Ω: 170 W x 2 Output power (RMS) at 14.4 VDC, THD 10%, 4 channels at 4 Ω: 75 W x 4 Output power (RMS) at 14.4 VDC, THD 10%, 4 channels at 2 Ω: 105 W x 4 Output power (RMS) at 14.4 VDC, THD 10%, 3 channels at 4 Ω: 75 W x 2 + 210 W x 1 Output power (RMS) at 14.4 VDC, THD 10%, 3 channels at 2 Ω / 4 Ω: 105 W x 2 + 210 W x 1 Output power (RMS) at 14.4 VDC, THD 10%, 2 channels at 4 Ω: 210 W x 2 Total power 840 W
Głośniki samochodowe JBL Stage1 601C SEAT SKODA VW 2-drożne 165mm
294.99 PLN
Głośniki samochodowe JBL Stage1 601C 2-drożne JBL Stage1 601C to 2-drożne głośniki samochodowe, które pozwalają cieszyć się doskonałym brzmieniem podczas każ...
JL AUDIO 10W0V3-4 10 inch 25cm Subwoofer for Car
647.45 PLN
Discover the 10W0V3-4 Subwoofer from JL Audio, which stands out for its excellent excursion and linearity. With a power handling of 300W @ 4 Ohm and a 2-inch voice coil, this 10" Subwoofer sets new standards. Thanks to its patented Elevated Frame Cooling design, it offers optimized cooling and reliability. Ideal for compact and bass reflex enclosures with amplifier power ratings from 75 to 300 watts. Features 10" Subwoofer Power handling: 300W RMS Recommended amplifier power: 75 - 300W RMS Nominal impedance: 4 Ω Optimized for compact and bass reflex enclosures Patented Elevated Frame Cooling design Technical Specifications Continuous power handling (RMS): 300 W Nominal diameter: 250 mm / 10.0 inches Free Air resonance frequency (Fs): 32.09 Hz Mounting depth: 124 mm (4.90 inches) Volume displacement: 0.96 L Net weight: 3.40 kg Enclosure Specifications Sealed enclosure: Volume 18.4 L, F3: 42.4 Hz Bass reflex enclosure: Volume 31.86 L, Fb: 30 Hz, F3: 29.6 Hz Wall thickness: 19 mm
Blow Radio Samochodowe Bluetooth 1-Din Rds USB Aux Sd Uchwyt Na Telefon Pilot
126.77 PLN
⭐RADIO SAMOCHODOWE BLUETOOTH 1-DIN RDS USB AUX SD UCHWYT NA TELEFON PILOT⭐ ❗❕NAJWAŻNIEJSZE INFORMACJE❕❗ ⏺ Wbudowany mocny uchwyt trzymający telefon czy nawig...
Edge DBX EDBX12TADSP-E3 12 inch active enclosure subwoofer
1720.08 PLN
The DBX EDBX12TADSP-E3 is a 12-inch (30 cm) active enclosure subwoofer from EDGE in bass reflex configuration. The enclosure is made of MDF with a slot opening. A specially designed amplifier heat sink minimizes airflow turbulence. A highly efficient Class-D amplifier operates with a DSP frontend. Control via smartphone app includes a parametric 8-band EQ, subsonic filter, low-pass filter, phase adjustment, and delay. Features include automatic power on, low-level and high-level inputs, remote control of the bass level, and equipped with EDBX12 x2. Features 12-inch active enclosure subwoofer MDF enclosure with slot opening Bass reflex configuration Specially designed amplifier heat sink to minimize airflow turbulence Highly efficient Class-D amplifier DSP frontend Control via smartphone app Parametric 8-band EQ Subsonic filter Low-pass filter Phase adjustment Delay Automatic power on Low-level and high-level inputs Remote control of the bass level Driver: EDBX12 x2 Technical Specifications Size: 12 inches (30 cm) RMS power: 800 watts Peak power: 2400 watts Impedance: 4 Ohm Frequency response: 25 Hz – 250 Hz
Hertz Uno S 300 S4 12 inch Subwoofer Masori
332.73 PLN
The Uno S 300 S4 from Hertz is a 12-inch Subwoofer with a continuous power handling of 250 Watts RMS and a peak power of 1000 Watts. The system has an impedance of 4 Ohms and a 38 mm voice coil. The technical features include a ferrite magnet with high flux density and a coated pressed paper diaphragm. The physical construction has a weight of 3 kg and an Xmech value of ±15.1 mm. With a sound pressure level of 89.5 dB, the model is designed for integration into various acoustic systems. Features 12-inch (30 cm) Subwoofer Continuous power handling: 250 Watts RMS Peak power: 1000 Watts Impedance: 4 Ohms 38 mm voice coil Ferrite magnet with high flux density Diaphragm made of coated pressed paper Weight: 3 kg Xmech: ±15.1 mm Technical Specifications Magnet size: 134 x 45 x 34 mm Effective diaphragm diameter (D): 258 mm Xmax: 9.1 mm DC resistance (Re): 3.6 Ohms Resonance frequency (Fs): 33 Hz Equivalent volume (Vas): 82.2 l Moving mass (Mms): 112 g Compliance (Cms): 0.21 mm/N Force factor (BL): 11.3 Tm Total Q factor (Qts): 0.6 Electrical Q factor (Qes): 0.65 Mechanical Q factor (Qms): 7.8 Sound pressure level (Spl): 89.5 dB Outer diameter (A): 307 mm Mounting diameter (B): 280 mm Total height (C): 128 mm Mounting depth (D): 121 mm
Hertz Cento CS 200 S4 8 Inch Subwoofer Masori
515.27 PLN
Hertz Cento CS 200 S4 is an 8 inch (20 cm) Subwoofer with 4 Ohm single voice coil and 150 W RMS as well as 300 W Peak. The voice coil with a diameter of 35 mm works with a high-density ferrite magnet; the diaphragm is made of polypropylene. A special cooling system, dynamic fluid optimization, and a highly resistant ABS plastic seal are integrated. Xmax is 9 mm, Xmech 11.5 mm, the resonance frequency is 40 Hz; Re 3.3 Ohm and Le 1.7 mH. Other specifications: Vas 13.7 l, Mms 76.8 g, Cms 0.21 mm/N, BL 10.6 T·m, Qts 0.52, Qes 0.58, Qms 5, sound pressure 84 dB. Effective diaphragm diameter 172 mm, magnet size 120 x 50 x 28 mm, weight 2.87 kg. Version without filter component, with reduced installation depth and compact design. Features 8 inch (20 cm) Subwoofer Impedance 4 Ohm Power handling RMS 150 W Power handling Peak 300 W Single voice coil Voice coil Ø 35 mm Magnet high-density ferrite Diaphragm polypropylene Special cooling system Dynamic fluid optimization Highly resistant ABS plastic seal Reduced installation depth Compact design Without filter component Weight 2.87 kg Technical specifications Size 200 mm Effective diaphragm diameter 172 mm Xmax 9 mm Xmech 11.5 mm Re 3.3 Ohm Fs 40 Hz Le 1.7 mH Vas 13.7 l Mms 76.8 g Cms 0.21 mm/N BL 10.6 T·m Qts 0.52 Qes 0.58 Qms 5 Sound pressure 84 dB Magnet size 120 x 50 x 28 mm A 213 mm B 177 mm C 114 mm D 101 mm E 201 mm F 24 mm
Focal-JMlab Universal ICU100 4 inches (10 cm) speaker Shop
471.84 PLN
Universal ICU100 is a 4-inch (10 cm) coaxial speaker from Focal. The frequency response ranges from 100 Hz to 21 kHz. The sensitivity is 90.3 dB at 2.83V/1m. The nominal power handling is 40 W RMS, and the maximum power handling is 80 W. The nominal impedance is 4 Ohm. The cutout diameter is 92 mm, and the mounting depth is 49.0 mm. Features 4-inch (10 cm) coaxial speaker Cutout diameter: 92 mm Mounting depth: 49.0 mm Technical Specifications Frequency response: 100 Hz – 21 kHz Nominal impedance: 4 Ohm Sensitivity (2.83V/1m): 90.3 dB Nominal power handling: 40 W RMS Maximum power handling: 80 W
Hifonics Zeus ZRX8D2 8 Inch Subwoofer Masori
814.69 PLN
The Hifonics Zeus ZRX8D2 is an 8-inch (20 cm) Subwoofer. It uses a dual magnet with 2 x 1.7 kg as well as a 64 mm dual voice coil with X-Max +/- 17 mm. The double-stitched, ribbed surround and a dual polycotton spider with double centering are integrated. Ventilation and pole core drilling are present. The diaphragm is made of handcrafted, coated paper, combined with an aluminum die-cast basket and blue magnet protector. The impedance is 2 + 2 ohms, the nominal power is 600 W RMS, and the peak power is 1200 W MAX. Specifications: Fs 40.4 Hz, Qts 0.43, VAS 6.1 L, 82 dB, and dimensions Ø 184 mm and ‡ 144 mm. Features 8-inch (20 cm) Subwoofer Dual magnet 2 x 1.7 kg 64 mm dual voice coil X-Max +/- 17 mm Double-stitched, ribbed surround Dual polycotton spider with double centering Ventilation and pole core drilling Handcrafted, coated paper diaphragm Aluminum die-cast basket Blue magnet protector Impedance 2 + 2 ohms RMS power 600 W Peak power 1200 W Technical Specifications Fs 40.4 Hz Qts 0.43 VAS 6.1 L 82 dB Dimensions Ø 184 mm Dimensions ‡ 144 mm
Deaf Bonce Machete Fight MF-08S 8 inch subwoofer Masori
511.12 PLN
The Machete Fight MF-08S is an 8-inch (20 cm) Subwoofer from Deaf Bonce. It delivers 600 W RMS and 1200 W peak power. The construction includes a paper cone, foam surround, ferrite magnet, and a steel frame, with the voice coil wire made of copper. The voice coil measures 2.00 inches. The linear excursion is 12 mm in each direction, and the mechanical excursion is 24 mm. Available impedance variants are 2+2 or 4+4 ohms. Specified parameters are SPL 84.00/84.30 dB, Fs 48.00/48.20 Hz, Qts 0.41/0.42, BL 15.10/15.40, and Vas 7.50/7.90 L. The mounting depth is 115 mm, the cutout size is 183.0 mm, and the weight is 4.5 kg. Features 8-inch (20 cm) Subwoofer RMS power: 600 W Peak power: 1200 W Impedance: 2+2 or 4+4 ohms Xmax: 12 mm in each direction Xmech: 24 mm Cone: Paper Surround: Foam Magnet: Ferrite Frame: Steel Voice coil wire: Copper Mounting depth: 115 mm Cutout size: 183.0 mm Weight: 4.5 kg Technical Specifications Voice coil size: 50.8 mm SPL: 84.00 / 84.30 dB Fs: 48.00 / 48.20 Hz Qts: 0.41 / 0.42 BL: 15.10 / 15.40 Vas: 7.50 / 7.90 L
JL AUDIO 12W0V3-4 12 inch 30cm Subwoofer for Car
749.06 PLN
Discover the JL Audio 12W0V3-4, a 12" (30 cm) Subwoofer that sets new standards in efficiency, excursion capability, and linearity. With a robust voice coil and the unique Elevated Frame Cooling design, it is optimized for power levels from 75W to 300W RMS. Ideal for medium-sized sealed or bass reflex enclosures. Features Excellent efficiency and linearity Robust 2-inch voice coil Patented cooling design Suitable for 75 - 300W RMS For sealed and bass reflex enclosures Technical specifications Continuous power handling (RMS): 300 W Recommended amplifier power (RMS): 75 - 300 W Nominal impedance: 4 Ω Nominal diameter: 300 mm / 12.0 inches Overall diameter: 318 mm / 12.52 inches Mounting diameter: 281 mm / 11.0625 inches Mounting depth: 137 mm / 5.40 inches Volume displacement: 1.36 L / 0.048 cu ft Net weight: 3.68 kg / 8.11 lb Fs: 28.43 Hz Qts: 0.67 Vas: 71.64 L / 2.530 cu ft Xmax: 11.4 mm / 0.45 inches Enclosure specifications Sealed enclosure volume: 38.9 L / 1.375 cu ft Bass reflex enclosure volume: 49.6 L / 1.75 cu ft Wall thickness: 19 mm / 0.75 inches Port diameter (ID): 76 mm / 3 inches Port length (L): 356 mm / 14 inches
W rozrywce samochodowej najlepsze produkty
Audio System CO-40.4 M 4-Channel Amplifier Masori
514.49 PLN
The CO-40.4 M from Audio System is a 4-Channel Amplifier IC amplifier from the CO-SERIES. The device features an automatic power-on function via the AUX input as well as a high-level input with automatic activation. For sound filtering, it includes a switchable LP filter, a continuously adjustable HP filter, and a subsonic filter. The input sensitivity ranges from 0.1 to 13V. A 30 cm cable set with ISO is included. The dimensions of the housing are 123 x 45 x 80 mm. The power output is rated at 4x 40 Watts RMS at 4 Ohms or 4x 60 Watts RMS at 2 Ohms. Features 4-Channel Amplifier CO-SERIES IC amplifier Power: 4x 40 Watts RMS at 4 Ohms Power: 4x 60 Watts RMS at 2 Ohms Automatic activation via AUX input Priority 1 is AUX input Switchable LP filter: 80 Hz or 1500 Hz Continuously adjustable HP filter: 80 to 4000 Hz Subsonic filter Input sensitivity: 0.1-13V High-level input with automatic activation Includes 30 cm cable set with ISO Dimensions: 123 x 45 x 80 mm
JBL Stage 1 621 Głośniki Samochodowe 16,5Cm / 165Mm 2 Drożne
197.98 PLN
⭐JBL Stage 1 621 głośniki samochodowe 16,5cm / 165mm 2 drożne⭐ ✅SERIA STAGE✅ Głośniki z serii Stage1 wprowadzają charakterystyczny koncertowy dźwięk JBL do w...
Hertz Dieci DSK 165.3 6.5 inch speaker set Masori
371.75 PLN
The Dieci DSK 165.3 from Hertz is a 6.5 inch Speaker Set with a continuous power of 80 Watts and a peak power of 160 Watts. The system's impedance is 4 Ohms with a sensitivity of 93 dB SPL. The frequency response ranges from 50 Hz to 23 kHz. The woofers feature a V-Cone profile and a TPU surround. Additional features include a neodymium motor assembly and a PEI membrane for the high-frequency range. A Hi-Pass Crossover separates at 3.5 kHz with 12 dB octave. The system consists of compact woofers, tweeters, and passive filters directly at the connection cables. Features 6.5 inch (16.5 cm) Speaker Set Woofer with V-Cone Profile TPU Surround (Thermoplastic Polyurethane) Neodymium Motor Assembly PEI Membrane Power: 80 Watts RMS Power: 160 Watts Max Impedance: 4 Ohm Sensitivity: 93 dB SPL Frequency Response: 50 Hz - 23 kHz Hi-Pass Crossover: 3.5 kHz @ 12 dB octave Woofer Voice Coil: 25 mm diameter Weight Woofer: 0.74 kg Weight Tweeter: 0.03 kg Weight Crossover: 0.16 kg Technical Data D: 135 mm Re: 3.3 Ohm Fs: 67 Hz Le: 0.26 mH Vas: 14.6 l Mms: 11.3 g Cms: 0.51 mm/N BL: 4.2 T*m Qts: 0.81 Qes: 0.90 Qms: 7.59 Installation dimension A: 165 mm Installation dimension B: 144 mm Installation dimension C: 72 mm Installation dimension D: 64 mm
Hertz Dieci DCX 165.3 DCX 6.5 inch Coaxial Speakers Masori
216.33 PLN
The Dieci DCX 165.3 from Hertz is a 6.5 inch coaxial speaker with a continuous power handling of 60 Watts RMS and a peak value of 120 Watts. The system has an impedance of 4 Ohm and a sound pressure level of 93 dB. The frequency response ranges from 60 Hz to 21 kHz. The woofer is equipped with a high-density flux ferrite magnet and a water-repellent pressed paper membrane. For the high-frequency range, a neodymium magnet with a PEI dome is used. The construction also includes a TPU surround and a 25 mm woofer voice coil. Features 6.5 inch (16.5 cm) coaxial speaker Power: 60 Watts RMS Power: 120 Watts Max Impedance: 4 Ohm Water-repellent pressed paper membrane TPU (Thermoplastic polyurethane) surround High-density flux ferrite magnet (Woofer) Neodymium magnet (Tweeter) PEI dome Built-in crossovers Technical specifications Frequency response: 60 Hz - 21,000 Hz Sound pressure level: 93 dB Mounting depth: 72 mm Overall diameter (A): 165 mm Cutout diameter (B): 144 mm Depth (C): 72 mm Overhang (D): 64 mm Woofer voice coil: 25 mm Magnet size: 80 x 40 x 15 mm Weight per speaker: 0.77 kg Vas: 14.3 l Fs: 68 Hz Re: 3.3 Ohm Qts: 0.85 Qes: 0.96 Qms: 7.54 Mms: 11.0 g Cms: 0.49 mm/N BL: 4.0 T*m
Audio System SW 11 Active 10 Inch Active Enclosure Subwoofer
1391.37 PLN
The SW 11 Active is a 10-inch (25 cm) active enclosure subwoofer from Audio System with an aluminum die-cast housing and a weight of 8 kg. An internal mono amplifier delivers 200 watts maximum power and 150 watts RMS at 4 ohms. The included RTC SW 11 remote control allows for phase shift 0/180°. Adjustable options include bass boost 0–12 dB, low-pass filter, and gain. Connectivity options include an RCA input and an external high-level input with automatic turn on. The dimensions are a diameter of 360 mm and a height of 135 mm. Designed as a spare wheel subwoofer. Features 10-inch (25 cm) active enclosure subwoofer Spare wheel subwoofer Aluminum die-cast housing, 8 kg Internal mono amplifier RTC SW 11 remote control included Bass boost 0–12 dB Low-pass filter Gain RCA input External high-level input with automatic turn on Short cable set included Technical Specifications Maximum power: 200 watts RMS power: 150 watts Impedance: 4 ohms Phase shift: 0/180° Bass boost: 0–12 dB Dimensions: diameter 360 mm, height 135 mm
Audio System MX 165 Evo 6.5 inch speaker set
429.62 PLN
The MX 165 Evo from Audio System is a 6.5 inch 2-way Speaker Set from the MX-SERIES. The design is defined as a 165 mm 2-way Efficient Compo System. The set consists of two tweeters of model HS 19 W including the crossover FWK M as well as two mid-bass drivers of type MXS 165 EVO. The impedance of the system is 3 Ohms. The power handling is specified as 2x 120 Watts maximum and 80 Watts RMS. For installation, a mounting depth of 59 mm and a mounting diameter of 143 mm are required. Features 6.5 inch (16.5 cm) Speaker Set MX-SERIES 2-way System 165 mm 2-way Efficient Compo System 2x tweeters HS 19 W with crossover FWK M 2x mid-bass drivers MXS 165 EVO Impedance: 3 Ohms Power: 120 Watts Max Power: 80 Watts RMS Mounting depth: 59 mm Mounting diameter: 143 mm
Audio System CO-600.5 5-Channel Amplifier Masori
1389.72 PLN
CO-600.5 is a 5-Channel Amplifier from Audio System in the CO series. The A/B topology, variable and switchable high-pass and low-pass filters, as well as a 3-way fully active mode are integrated. The RTC Bass Remote Control is included. The input sensitivity is between 0.2–8 volts. An RCA high-level input with automatic turn-on is available. The RMS power ratings are 4 x 60 WRMS at 4 ohms, 4 x 85 WRMS at 2 ohms, 1 x 250 WRMS mono at 4 ohms, and 1 x 350 WRMS mono at 2 ohms. The dimensions are 420 x 47 x 171 mm. Features 5-Channel Amplifier A/B Amplifier Variable, switchable high-pass and low-pass filters 3-way fully active mode RTC Bass Remote Control included Input sensitivity 0.2–8 volts RCA high-level input with automatic turn-on Technical Specifications 4 x 60 WRMS at 4 ohms 4 x 85 WRMS at 2 ohms 1 x 250 WRMS mono at 4 ohms 1 x 350 WRMS mono at 2 ohms Dimensions 420 x 47 x 171 mm
Audio System M 100 Evo 2 4 inch speaker set Masori
643.44 PLN
The M 100 Evo 2 from Audio System is a 4-inch Speaker Set designed as a 2-way High Efficient Compo System. The set consists of two HS 24 EVO2 Tweeters including FWK TW crossover as well as two MS 100 EVO mid-bass drivers. The components have an impedance of 3 Ohms. The maximum power is rated at 2x 110 Watts, while the nominal power is 70 Watts. For the installation of the 100 mm speakers, a mounting depth of 48 mm and a mounting diameter of 91 mm are required. Features 4 inch (10cm) Speaker Set 100 mm 2-way High Efficient Compo System 2x Tweeter model HS 24 EVO2 Crossover FWK TW for Tweeters 2x mid-bass driver model MS 100 EVO Impedance: 3 Ohms Maximum power: 2x 110 Watts Nominal power: 70 Watts Mounting depth: 48 mm Mounting diameter: 91 mm
Audio System Carbon 250.4 4-Channel Amplifier Masori
792.37 PLN
Carbon 250.4 is a 4-Channel Amplifier from Audio System. The power includes 4 x 62.5 Watts RMS at 4 Ohms, 4 x 105 Watts RMS at 2 Ohms, and 2 x 210 Watts RMS bridged at 4 Ohms. Variable, switchable high-pass and low-pass filters cover 50 to 4000 Hz. A socket for an RTC (Remote Control, optional) is integrated. An RCA high-level input with automatic turn-on as well as a RCA output are available. The input sensitivity ranges from 0.2 to 8 Volts, and the dimensions are 280 x 51 x 176 mm. Features 4-Channel Amplifier 4 x 62.5 Watts RMS @ 4 Ohms 4 x 105 Watts RMS @ 2 Ohms 2 x 210 Watts RMS @ 4 Ohms bridged Variable, switchable high-pass and low-pass filters LPF: 50–4000 Hz HPF: 50–4000 Hz 0.2–8 Volt input sensitivity RCA high-level input with automatic turn-on RTC connection (Remote Control, optional) RCA output Dimensions 280 x 51 x 176 mm
Hifonics Titan TS-200R 8 Inch Enclosure Subwoofer Masori
432.14 PLN
The Hifonics Titan TS-200R is an 8-inch (20 cm) Enclosed Subwoofer as a single bass reflex system. The enclosure is made of MDF with internal bracing. The reinforced injection-PP membrane is driven by a powerful voice coil. Chrome brackets serve as protection, the front panel is wrapped in carbon look, and the Hifonics logo is embroidered. The power is 200 W RMS and 400 W MAX. The impedance is 4 Ohms. The dimensions are 34 x 29 x 31/25 cm. Features 8-inch Enclosed Subwoofer Single bass reflex system Enclosure made of MDF Internal bracing Reinforced injection-PP membrane Powerful voice coil Chrome brackets Front panel wrapped in carbon look Hifonics logo embroidered Technical Specifications Speaker size 20 cm (8 inches) Power 200 W RMS Power 400 W MAX Impedance 4 Ohms Dimensions 34 x 29 x 31/25 cm
Hertz Cento C 165 6.5 inch midbass driver Masori
290.94 PLN
The Cento C 165 is a 6.5-inch (16.5 cm) mid-bass speaker from Hertz. The diaphragm uses SPP-M (Semi Pressed Paper-Mica) and combines semi-pressed paper with mica. The frequency response ranges from 55–7000 Hz, the voice coil has a diameter of 25 mm, and the mechanical stroke (Xmech) is 4.9 mm. The magnet is made of high-density flux ferrite with dimensions of 85 x 32 x 15 mm. The weight per speaker is 0.96 kg. The parameters include Re 3.2 Ohm, Fs 60 Hz, Le 0.2 mH, Vas 13.24 l, Mms 13.9 g, Cms 0.51 mm/N, BL 4.9 T*m, Qts 0.59, Qes 0.69, Qms 3.9, and SPL 93 dB. Physical dimensions: A 165 mm, B 142 mm, C 71 mm, D 62.5 mm, E 171 mm, F 24 mm. Features 6.5-inch (16.5 cm) mid-bass speaker Diaphragm: SPP-M (Semi Pressed Paper-Mica) Diaphragm material: semi-pressed paper + mica Magnet: high-density flux ferrite Magnet size: 85 x 32 x 15 mm Voice coil: Ø 25 mm Weight per speaker: 0.96 kg Component: Woofer Technical Specifications Impedance: 4 Ohm RMS power: 70 W Peak power: 210 W Frequency response: 55–7000 Hz Xmech: 4.9 mm Re: 3.2 Ohm Fs: 60 Hz Le: 0.2 mH Vas: 13.24 l Mms: 13.9 g Cms: 0.51 mm/N BL: 4.9 T*m Qts: 0.59 Qes: 0.69 Qms: 3.9 SPL: 93 dB D: 131.5 mm Dimensions: A 165 mm, B 142 mm, C 71 mm, D 62.5 mm, E 171 mm, F 24 mm
Hertz Dieci DCX 100.3 4 inch coaxial speakers Masori
209.63 PLN
The Dieci DCX 100.3 from Hertz is a 4 inch coaxial speaker with a continuous power handling of 30 W and a peak value of 60 W. The system has an impedance of 4 Ohm and an installation depth of 50 mm. A high-density ferrite magnet is used in the subwoofer, while a neodymium magnet is used in the tweeter. The membrane is made of water-repellent pressed paper and the dome is made of PEI. A TPU surround and built-in crossovers are also part of the construction. The frequency response ranges from 70 Hz to 21 kHz. Features 4 inch (10 cm) coaxial speaker Power: 30 W RMS Power: 60 W Max Impedance: 4 Ohm Water-repellent membrane made of pressed paper Neodymium magnet in the tweeter High-density ferrite magnet in the subwoofer TPU surround and PEI dome Built-in crossovers Installation depth: 50 mm Technical specifications Frequency response: 70 Hz - 21 kHz Size: 100 mm Subwoofer magnet size: 70 x 32 x 10 mm Weight of one speaker: 0.45 kg D: 85 mm Re: 3.3 Ohm Fs: 115 Hz Vas: 1.7 l Mms: 5.0 g Cms: 0.38 mm/N BL: 3.5 T*m Qts: 0.79 Qes: 0.96 Qms: 4.33 Spl: 92 dB Dimension A: 99 mm Dimension A3: 129 mm Dimension B: 94 mm Dimension C: 50 mm Dimension D: 43 mm
Hertz Uno K 165 6.5 inch speaker set Masori
250.1 PLN
The Hertz Uno K 165 is a 6.5 inch Speaker Set with a continuous power handling of 75 Watts RMS and a peak power of 300 Watts. The system operates with an impedance of 4 Ohms and achieves a sensitivity of 93.5 dB SPL. The frequency response covers a range from 55 Hz to 23 kHz. The technical features include an integrated Tweeter with a 24 mm diaphragm and a 14 mm voice coil. The woofer's voice coil has a diameter of 25 mm. A Crossover with a crossover type of 6 dB/octave is integrated into the Tweeter. Features 6.5 inch (16.5 cm) Speaker Set Continuous power handling: 75 Watts RMS Peak power: 300 Watts Impedance: 4 Ohms Integrated Tweeter Tweeter diaphragm: 24 mm Crossover type: 6 dB/octave Woofer weight: 0.7 kg Tweeter weight: 0.03 kg Technical Specifications Sensitivity: 93.5 dB SPL Frequency response: 55 Hz - 23,000 Hz Woofer voice coil: 25 mm diameter Tweeter voice coil: 14 mm diameter Physical specification A: 164.6 mm Physical specification B: 144 mm Physical specification C: 69 mm Physical specification D: 63 mm
Ground Zero Iridium GZIB 3.250SPL 10 inch enclosure subwoofer
2146.22 PLN
The Iridium GZIB 3.250SPL is a 10-inch Enclosed Subwoofer from Ground Zero. The bass reflex enclosure integrates 3x 25 cm SPL Subwoofers of the type GZIW 10XSPL with a front bass reflex tunnel. The construction includes a wooden enclosure and a clamp connection. The voice coil measures 50 mm made of copper, the diaphragm uses reinforced paper with a honeycomb structure, and the maximum displacement (Xmax) is 34 mm. The connection impedance is 1.4 Ohm and the net volume is 60 l. An amplifier power of 2000 watts at 1 Ohm is recommended. The dimensions are 83 x 34 x 32 / 24 cm (W x H x D1/D2). Features 10-inch Enclosed Subwoofer Bass reflex enclosure with 3x 25 cm SPL Subwoofers Front bass reflex tunnel Wooden enclosure Clamp connection Recommended amplifier power 2000 watts at 1 Ohm Net volume 60 l Dimensions (W x H x D1/D2) 83 x 34 x 32 / 24 cm Technical Specifications Subwoofer 3x GZIW 10XSPL Voice coil 50 mm copper Diaphragm reinforced paper with honeycomb structure Max. displacement (Xmax) 34 mm SPL power 2100 watts RMS 1500 watts Connection impedance 1.4 Ohm
Hifonics Titan TDA-200R (Active) 8 Inch Active Enclosure Subwoofer
1133.38 PLN
The Titan TDA-200R Active product is an 8-inch (20 cm) active enclosure subwoofer from Hifonics in the Titan TD series. The system utilizes an active dual bass reflex design with 2 x 20 cm and an integrated Class D amplifier. The enclosure is robustly constructed and features internal bracing. It comes with chrome protection bars, a front in carbon look foil, and a logo sticker. Technical specifications include 300 W RMS, 600 W MAX, LP 50 - 150 Hz @ 12/18 dB, phase shift 0°/180°, bass boost 0 - 12 dB, fixed subsonic 15 Hz, automatic power-on function via high-level inputs, RCA inputs, bass level remote control, and dimensions of 65 x 29 x 31/25 cm. Features 8-inch (20 cm) active enclosure subwoofer Active dual bass reflex with 2 x 20 cm Integrated Class D amplifier Sturdy enclosure with internal bracing Chrome protection bars Front in carbon look (foiled) Logo sticker Titan TD series Technical Specifications RMS power: 300 W MAX power: 600 W LP 50 - 150 Hz @ 12/18 dB Phase shift 0°/180° Bass boost 0 - 12 dB Fixed subsonic 15 Hz Automatic power-on function via high-level inputs RCA inputs Bass level remote control Dimensions: 65 x 29 x 31/25 cm
Hifonics TSA300R 12 Inch Active Enclosure Subwoofer Masori
1015.33 PLN
Hifonics TSA300R is a 12 inch (30 cm) active enclosure subwoofer with a bass reflex system and integrated Class-D Amplifier. The RMS power is 300 watts, and the maximum power is 600 watts. Adjustable settings include low pass 50-150 Hz, slope 12/18 dB, phase switch 0-180 degrees, and bass boost 0-12 dB at 45 Hz. Connections and features include hi-level inputs, auto turn on, and a bass remote. Stability and protection are provided by chrome brackets, the front panel is finished in a carbon look, and the carpet covering features the Hifonics Eagle logo. The design is a single version with a nearly square footprint and a rear slope. Dimensions are 44 x 36 x 40/31 cm, with a quick-release power connector included. Features 12 inch (30 cm) active enclosure subwoofer Bass reflex system Integrated Class-D Amplifier RMS power 300 watts Maximum power 600 watts Low pass 50-150 Hz Slope 12/18 dB Phase switch 0-180 degrees Bass boost 0-12 dB at 45 Hz Hi-level inputs Auto turn on Includes bass remote Stable chrome brackets Front panel finished in carbon look Carpet covering with Hifonics Eagle logo Included quick-release power connector Single version, nearly square footprint with rear slope Dimensions 44 x 36 x 40/31 cm Technical Specifications Speaker size 300 mm Low pass 50-150 Hz Slope 12/18 dB Phase position 0-180 degrees Bass boost 0-12 dB at 45 Hz
Audio System US08 Active EVO 8 Inch Active Enclosure Subwoofer
1390.88 PLN
US08 Active EVO is a 200 mm active enclosure subwoofer from Audio System. Underseat subwoofer with internal mono amplifier in a 6.5 kg aluminum die-cast housing. Two passive membranes on both sides. Special clipping circuit, bass boost 0–18 dB at 50 Hz and phase shift 0–180°. RCA input or external high-level input with automatic turn on. Includes RTC and original Audio System cable set from PCS AMP. Impedance 2 Ohm. Power 275 watts and 225 watts. Dimensions 345 mm length, 70 mm height, 250 mm depth. Features 200 mm active enclosure subwoofer Underseat subwoofer with internal mono amplifier Aluminum die-cast housing, 6.5 kg 2x passive membranes on both sides Special clipping circuit RCA input or external high-level input with automatic turn on Includes RTC Includes original Audio System cable set from PCS AMP Technical Specifications Impedance: 2 Ohm Phase shift: 0–180° Bass boost: 0–18 dB at 50 Hz Power: 275 watts Power: 225 watts Dimensions: 345 mm length, 70 mm height, 250 mm depth
Hertz Dieci DBX 25.3 10 inch Enclosure Subwoofer Masori
580.39 PLN
The Dieci DBX 25.3 from Hertz is a 10-inch Enclosed Subwoofer with a continuous power handling of 150 watts and a peak power of 600 watts. The system features a SUB BOX design without a filter component and operates with an impedance of 4 ohms. The enclosure is made from thick MDF panels and includes a rear slanted plate to reduce wave reflections. The integrated DS subwoofer unit is equipped with a 38 mm voice coil. The frequency response of the system ranges from 32 to 400 Hz with a maximum mechanical excursion of 9 mm. With dimensions of 443 mm in width, 227 mm in depth, and 298 mm in height, the enclosure is compactly designed. Features 10-inch (25 cm) Enclosed Subwoofer Material: Thick MDF enclosure Rear slanted plate for reflection reduction DS subwoofer unit SUB BOX design without filter component Continuous power handling: 150 watts Peak power handling: 600 watts Impedance: 4 ohms Technical Specifications Voice coil diameter: 38 mm Frequency response: 32 - 400 Hz Xmech: 9 mm Width (A): 443 mm Depth (B): 227 mm Height (C): 298 mm