Hertz Cento CS 200 S4 8 Inch Subwoofer Masori
515.81 PLN
Zyskaj dostęp do pełnej karty informacyjnej, porównaj ceny i odkryj funkcje dla PRODUKTNAME, dostępnego w cenie PRICEMONET; należy do kategorii CATEGORYNAME; sprzedaż prowadzona przez SELLERNAME, a produkcja przez PRODUCERNAME.
Hertz Cento CS 200 S4 is an 8 inch (20 cm) Subwoofer with 4 Ohm single voice coil and 150 W RMS as well as 300 W Peak. The voice coil with a diameter of 35 mm works with a high-density ferrite magnet; the diaphragm is made of polypropylene. A special cooling system, dynamic fluid optimization, and a highly resistant ABS plastic seal are integrated. Xmax is 9 mm, Xmech 11.5 mm, the resonance frequency is 40 Hz; Re 3.3 Ohm and Le 1.7 mH. Other specifications: Vas 13.7 l, Mms 76.8 g, Cms 0.21 mm/N, BL 10.6 T·m, Qts 0.52, Qes 0.58, Qms 5, sound pressure 84 dB. Effective diaphragm diameter 172 mm, magnet size 120 x 50 x 28 mm, weight 2.87 kg. Version without filter component, with reduced installation depth and compact design. Features 8 inch (20 cm) Subwoofer Impedance 4 Ohm Power handling RMS 150 W Power handling Peak 300 W Single voice coil Voice coil Ø 35 mm Magnet high-density ferrite Diaphragm polypropylene Special cooling system Dynamic fluid optimization Highly resistant ABS plastic seal Reduced installation depth Compact design Without filter component Weight 2.87 kg Technical specifications Size 200 mm Effective diaphragm diameter 172 mm Xmax 9 mm Xmech 11.5 mm Re 3.3 Ohm Fs 40 Hz Le 1.7 mH Vas 13.7 l Mms 76.8 g Cms 0.21 mm/N BL 10.6 T·m Qts 0.52 Qes 0.58 Qms 5 Sound pressure 84 dB Magnet size 120 x 50 x 28 mm A 213 mm B 177 mm C 114 mm D 101 mm E 201 mm F 24 mm
EAN: 8018823138611
Koszt dostawy: 7.7 PLN
Dostępność: in stock
Czas dostawy: 1-3 dni robocze
Stan: new
Hertz Cento CS 200 S4 is an 8 inch (20 cm) Subwoofer with 4 Ohm single voice coil and 150 W RMS as well as 300 W Peak. The voice coil with a diameter of 35 mm works with a high-density ferrite magnet; the diaphragm is made of polypropylene. A special cooling system, dynamic fluid optimization, and a highly resistant ABS plastic seal are integrated. Xmax is 9 mm, Xmech 11.5 mm, the resonance frequency is 40 Hz; Re 3.3 Ohm and Le 1.7 mH. Other specifications: Vas 13.7 l, Mms 76.8 g, Cms 0.21 mm/N, BL 10.6 T·m, Qts 0.52, Qes 0.58, Qms 5, sound pressure 84 dB. Effective diaphragm diameter 172 mm, magnet size 120 x 50 x 28 mm, weight 2.87 kg. Version without filter component, with reduced installation depth and compact design. Features 8 inch (20 cm) Subwoofer Impedance 4 Ohm Power handling RMS 150 W Power handling Peak 300 W Single voice coil Voice coil Ø 35 mm Magnet high-density ferrite Diaphragm polypropylene Special cooling system Dynamic fluid optimization Highly resistant ABS plastic seal Reduced installation depth Compact design Without filter component Weight 2.87 kg Technical specifications Size 200 mm Effective diaphragm diameter 172 mm Xmax 9 mm Xmech 11.5 mm Re 3.3 Ohm Fs 40 Hz Le 1.7 mH Vas 13.7 l Mms 76.8 g Cms 0.21 mm/N BL 10.6 T·m Qts 0.52 Qes 0.58 Qms 5 Sound pressure 84 dB Magnet size 120 x 50 x 28 mm A 213 mm B 177 mm C 114 mm D 101 mm E 201 mm F 24 mm
EAN: 8018823138611
Koszt dostawy: 7.7 PLN
Dostępność: in stock
Czas dostawy: 1-3 dni robocze
Stan: new
Porównanie podobnych produktów
Hertz Cento CS 250 S2 / S4 10 Inch Subwoofer Masori
601.51 PLN
Hertz Cento CS 250 S2 / S4 is a 10 inch (25 cm) Subwoofer with 300 W RMS and 600 W Peak. The impedance is 2 Ohm or 4 Ohm depending on the version. Equipped with a 35 mm voice coil made of pure copper on a fiberglass carrier, high-density ferrite magnet assembly, and polypropylene membrane. Flow dynamics optimization system to reduce distortion caused by air compression at high excursions. Xmax is 12.5 mm, Xmech 16.5 mm, resonance frequency 30 Hz. Electroacoustic design for enclosures from 16 liters. Terminal block for cables up to 8 AWG, rubber protection of the magnet assembly, and ABS seal. Magnet size 120 x 45 x 34 mm, weight 3.795 kg. Features 10 inch (25 cm) Subwoofer RMS power 300 W Peak power 600 W Impedance 2 Ohm or 4 Ohm (S2/S4) Voice coil 35 mm, 2 Ohm, six-layer made of pure copper on fiberglass carrier Polypropylene membrane Flow dynamics optimization system Membrane and dust cap geometry FEM-optimized Optimized magnetic group geometry Terminal block with pressure contacts for cables up to 8 AWG Rubber protection of the magnet assembly and high-strength ABS seal Electroacoustic design optimized for enclosures from 16 liters Suitable for custom boxes without decompression hole Technical data Size 250 mm Voice coil diameter 35 mm Magnet size 120 x 45 x 34 mm Weight 3.795 kg Xmech 16.5 mm A 270 mm B 231 mm C 132 mm D 115 mm E 260 mm F 28.3 mm D 216 mm Xmax 12.5 mm Re 2.2 Ohm Fs 30 Hz Le 2.38 mH Vas 32 liters Mms 166 g Cms 0.17 mm/N BL 11.5 T·m Qts 0.49 Qes 0.52 Qms 9.4 SPL 84 dB Sealed box volume 16 liters Fb 50 Hz Qtc 0.87 Enclosure dimensions sealed B 385 mm, H 385 mm, D 180 mm Mounting hole 231 mm Wood thickness 19 mm Sheet cut A 385 x 385 mm, quantity 2 Sheet cut B 385 x 142 mm, quantity 2 Sheet cut C 347 x 142 mm, quantity 2
Hertz Cento CS 250 S2 / S4 10 Inch Subwoofer Masori
601.51 PLN
Hertz Cento CS 250 S2 / S4 is a 10 inch (25 cm) Subwoofer with 300 W RMS and 600 W Peak. The impedance is 2 Ohm or 4 Ohm depending on the version. Equipped with a 35 mm voice coil made of pure copper on a fiberglass carrier, high-density ferrite magnet assembly, and polypropylene membrane. Flow dynamics optimization system to reduce distortion caused by air compression at high excursions. Xmax is 12.5 mm, Xmech 16.5 mm, resonance frequency 30 Hz. Electroacoustic design for enclosures from 16 liters. Terminal block for cables up to 8 AWG, rubber protection of the magnet assembly, and ABS seal. Magnet size 120 x 45 x 34 mm, weight 3.795 kg. Features 10 inch (25 cm) Subwoofer RMS power 300 W Peak power 600 W Impedance 2 Ohm or 4 Ohm (S2/S4) Voice coil 35 mm, 2 Ohm, six-layer made of pure copper on fiberglass carrier Polypropylene membrane Flow dynamics optimization system Membrane and dust cap geometry FEM-optimized Optimized magnetic group geometry Terminal block with pressure contacts for cables up to 8 AWG Rubber protection of the magnet assembly and high-strength ABS seal Electroacoustic design optimized for enclosures from 16 liters Suitable for custom boxes without decompression hole Technical data Size 250 mm Voice coil diameter 35 mm Magnet size 120 x 45 x 34 mm Weight 3.795 kg Xmech 16.5 mm A 270 mm B 231 mm C 132 mm D 115 mm E 260 mm F 28.3 mm D 216 mm Xmax 12.5 mm Re 2.2 Ohm Fs 30 Hz Le 2.38 mH Vas 32 liters Mms 166 g Cms 0.17 mm/N BL 11.5 T·m Qts 0.49 Qes 0.52 Qms 9.4 SPL 84 dB Sealed box volume 16 liters Fb 50 Hz Qtc 0.87 Enclosure dimensions sealed B 385 mm, H 385 mm, D 180 mm Mounting hole 231 mm Wood thickness 19 mm Sheet cut A 385 x 385 mm, quantity 2 Sheet cut B 385 x 142 mm, quantity 2 Sheet cut C 347 x 142 mm, quantity 2
Hertz Cento CS 300 S2 / S4 12 Inch Subwoofer Masori
729.96 PLN
Hertz Cento CS 300 S2 / S4 is a 12 inch (30 cm) Subwoofer with 350 W RMS and 700 W Peak. The impedance is either 2 Ohm or 4 Ohm depending on the version. Version with 35 mm voice coil on fiberglass carrier and high-density ferrite magnet. Polypropylene membrane and optimized dust cap geometry. Flow dynamics optimization system. Xmax 12.5 mm and Xmech 16.5 mm. Electroacoustic design for enclosures from 32 liters. Terminal block with pressure contacts for cable cross-sections up to approx. 8.37 mm² and version without decompression opening. Features 12 inch (30 cm) Subwoofer RMS power 350 W Peak power 700 W Impedance 2 Ohm or 4 Ohm Electroacoustic design for enclosures from 32 liters Flow dynamics optimization system Polypropylene membrane and dust cap Voice coil 35 mm, six-layer pure copper on fiberglass carrier Magnet made of high-density flux ferrite Without decompression opening Terminal block with pressure contacts, suitable for cables up to approx. 8.37 mm² Rubber protection of the magnet assembly and ABS seal; optional protective grille can be attached Technical data Size 300 mm Voice coil Ø 35 mm Magnet size (B x D x H) 134 x 45 x 34 mm Weight 4.844 kg Xmax 12.5 mm Xmech 16.5 mm D 267.01 mm Re 2.2 Ohm Fs 25 Hz Le 2.8 mH Vas 87.25 liters Mms 205 g Cms 0.20 mm/N BL 12 T*m Qts 0.46 Qes 0.49 Qms 7.2 SPL 86.5 dB A 318 mm B 281 mm C 147 mm D 130 mm E 308 mm F 28.3 mm Enclosure data (sealed box): Volume 32 liters, Fb 50 Hz, Qtc 0.9 Enclosure dimensions (sealed): B 495 mm, H 495 mm, D 200 mm Mounting cutout 281 mm Wood thickness 19 mm Plate cut (sealed): A 495 x 495 mm (2x), B 495 x 162 mm (2x), C 475 x 162 mm (2x)
Hertz Cento CS 300 S2 / S4 12 Inch Subwoofer Masori
729.96 PLN
Hertz Cento CS 300 S2 / S4 is a 12 inch (30 cm) Subwoofer with 350 W RMS and 700 W Peak. The impedance is either 2 Ohm or 4 Ohm depending on the version. Version with 35 mm voice coil on fiberglass carrier and high-density ferrite magnet. Polypropylene membrane and optimized dust cap geometry. Flow dynamics optimization system. Xmax 12.5 mm and Xmech 16.5 mm. Electroacoustic design for enclosures from 32 liters. Terminal block with pressure contacts for cable cross-sections up to approx. 8.37 mm² and version without decompression opening. Features 12 inch (30 cm) Subwoofer RMS power 350 W Peak power 700 W Impedance 2 Ohm or 4 Ohm Electroacoustic design for enclosures from 32 liters Flow dynamics optimization system Polypropylene membrane and dust cap Voice coil 35 mm, six-layer pure copper on fiberglass carrier Magnet made of high-density flux ferrite Without decompression opening Terminal block with pressure contacts, suitable for cables up to approx. 8.37 mm² Rubber protection of the magnet assembly and ABS seal; optional protective grille can be attached Technical data Size 300 mm Voice coil Ø 35 mm Magnet size (B x D x H) 134 x 45 x 34 mm Weight 4.844 kg Xmax 12.5 mm Xmech 16.5 mm D 267.01 mm Re 2.2 Ohm Fs 25 Hz Le 2.8 mH Vas 87.25 liters Mms 205 g Cms 0.20 mm/N BL 12 T*m Qts 0.46 Qes 0.49 Qms 7.2 SPL 86.5 dB A 318 mm B 281 mm C 147 mm D 130 mm E 308 mm F 28.3 mm Enclosure data (sealed box): Volume 32 liters, Fb 50 Hz, Qtc 0.9 Enclosure dimensions (sealed): B 495 mm, H 495 mm, D 200 mm Mounting cutout 281 mm Wood thickness 19 mm Plate cut (sealed): A 495 x 495 mm (2x), B 495 x 162 mm (2x), C 475 x 162 mm (2x)
Hertz Cento C 165 6.5 inch midbass driver Masori
387.07 PLN
The Cento C 165 is a 6.5-inch (16.5 cm) mid-bass speaker from Hertz. The diaphragm uses SPP-M (Semi Pressed Paper-Mica) and combines semi-pressed paper with mica. The frequency response ranges from 55–7000 Hz, the voice coil has a diameter of 25 mm, and the mechanical stroke (Xmech) is 4.9 mm. The magnet is made of high-density flux ferrite with dimensions of 85 x 32 x 15 mm. The weight per speaker is 0.96 kg. The parameters include Re 3.2 Ohm, Fs 60 Hz, Le 0.2 mH, Vas 13.24 l, Mms 13.9 g, Cms 0.51 mm/N, BL 4.9 T*m, Qts 0.59, Qes 0.69, Qms 3.9, and SPL 93 dB. Physical dimensions: A 165 mm, B 142 mm, C 71 mm, D 62.5 mm, E 171 mm, F 24 mm. Features 6.5-inch (16.5 cm) mid-bass speaker Diaphragm: SPP-M (Semi Pressed Paper-Mica) Diaphragm material: semi-pressed paper + mica Magnet: high-density flux ferrite Magnet size: 85 x 32 x 15 mm Voice coil: Ø 25 mm Weight per speaker: 0.96 kg Component: Woofer Technical Specifications Impedance: 4 Ohm RMS power: 70 W Peak power: 210 W Frequency response: 55–7000 Hz Xmech: 4.9 mm Re: 3.2 Ohm Fs: 60 Hz Le: 0.2 mH Vas: 13.24 l Mms: 13.9 g Cms: 0.51 mm/N BL: 4.9 T*m Qts: 0.59 Qes: 0.69 Qms: 3.9 SPL: 93 dB D: 131.5 mm Dimensions: A 165 mm, B 142 mm, C 71 mm, D 62.5 mm, E 171 mm, F 24 mm
Hertz Uno S 300 S4 12 inch Subwoofer Masori
346.29 PLN
The Uno S 300 S4 from Hertz is a 12-inch Subwoofer with a continuous power handling of 250 Watts RMS and a peak power of 1000 Watts. The system has an impedance of 4 Ohms and a 38 mm voice coil. The technical features include a ferrite magnet with high flux density and a coated pressed paper diaphragm. The physical construction has a weight of 3 kg and an Xmech value of ±15.1 mm. With a sound pressure level of 89.5 dB, the model is designed for integration into various acoustic systems. Features 12-inch (30 cm) Subwoofer Continuous power handling: 250 Watts RMS Peak power: 1000 Watts Impedance: 4 Ohms 38 mm voice coil Ferrite magnet with high flux density Diaphragm made of coated pressed paper Weight: 3 kg Xmech: ±15.1 mm Technical Specifications Magnet size: 134 x 45 x 34 mm Effective diaphragm diameter (D): 258 mm Xmax: 9.1 mm DC resistance (Re): 3.6 Ohms Resonance frequency (Fs): 33 Hz Equivalent volume (Vas): 82.2 l Moving mass (Mms): 112 g Compliance (Cms): 0.21 mm/N Force factor (BL): 11.3 Tm Total Q factor (Qts): 0.6 Electrical Q factor (Qes): 0.65 Mechanical Q factor (Qms): 7.8 Sound pressure level (Spl): 89.5 dB Outer diameter (A): 307 mm Mounting diameter (B): 280 mm Total height (C): 128 mm Mounting depth (D): 121 mm
Hifonics Titan TS-200R 8 Inch Enclosure Subwoofer Masori
432.59 PLN
The Hifonics Titan TS-200R is an 8-inch (20 cm) Enclosed Subwoofer as a single bass reflex system. The enclosure is made of MDF with internal bracing. The reinforced injection-PP membrane is driven by a powerful voice coil. Chrome brackets serve as protection, the front panel is wrapped in carbon look, and the Hifonics logo is embroidered. The power is 200 W RMS and 400 W MAX. The impedance is 4 Ohms. The dimensions are 34 x 29 x 31/25 cm. Features 8-inch Enclosed Subwoofer Single bass reflex system Enclosure made of MDF Internal bracing Reinforced injection-PP membrane Powerful voice coil Chrome brackets Front panel wrapped in carbon look Hifonics logo embroidered Technical Specifications Speaker size 20 cm (8 inches) Power 200 W RMS Power 400 W MAX Impedance 4 Ohms Dimensions 34 x 29 x 31/25 cm
Hertz Dieci DBX 25.3 10 inch Enclosure Subwoofer Masori
644.61 PLN
The Dieci DBX 25.3 from Hertz is a 10-inch Enclosed Subwoofer with a continuous power handling of 150 watts and a peak power of 600 watts. The system features a SUB BOX design without a filter component and operates with an impedance of 4 ohms. The enclosure is made from thick MDF panels and includes a rear slanted plate to reduce wave reflections. The integrated DS subwoofer unit is equipped with a 38 mm voice coil. The frequency response of the system ranges from 32 to 400 Hz with a maximum mechanical excursion of 9 mm. With dimensions of 443 mm in width, 227 mm in depth, and 298 mm in height, the enclosure is compactly designed. Features 10-inch (25 cm) Enclosed Subwoofer Material: Thick MDF enclosure Rear slanted plate for reflection reduction DS subwoofer unit SUB BOX design without filter component Continuous power handling: 150 watts Peak power handling: 600 watts Impedance: 4 ohms Technical Specifications Voice coil diameter: 38 mm Frequency response: 32 - 400 Hz Xmech: 9 mm Width (A): 443 mm Depth (B): 227 mm Height (C): 298 mm
Hertz HMS 10 S4-LD-SW.1 10 inch Subwoofer Masori
1541.32 PLN
The HMS 10 S4-LD-SW.1 from Hertz is a 10-inch Subwoofer designed for marine use with an RMS power handling of 300 watts and a peak power of 600 watts. The construction features a polypropylene diaphragm with UV inhibitors and a high-density flux ferrite magnet. The model has a 50 mm voice coil and is optimized for operation in infinite baffle configurations without a enclosure. A white sport grille with integrated LED lighting is part of the equipment. The physical dimensions include a depth of 116 mm and a component weight of 5.1 kg. The Subwoofer has an impedance of 4.5 ohms and a sound pressure level of 88 dB. Features 10-inch (25 cm) Subwoofer Power handling: 300 watts RMS Power handling: 600 watts Max Polypropylene diaphragm with UV inhibitors High-density flux ferrite magnet White sport grille with integrated LED lighting Operation with infinite baffle possible Xmech: ±19 mm Weight: 5.1 kg Technical Specifications Diameter (D): 210 mm Mounting depth: 116 mm Voice coil diameter: 50 mm Magnet size: 140 x 60 x 30 mm Xmax: 13.5 mm Resonance frequency (Fs): 41 Hz Equivalent volume (Vas): 37 l DC resistance (Re): 4.5 ohms Total quality factor (Qts): 0.71 Electrical quality factor (Qes): 0.76 Mechanical quality factor (Qms): 11 Sound pressure level (Spl): 88 dB Mms: 69 g Cms: 0.22 mm/N BL: 10.2 T*m Inductance (Le): 0.9 mH
Hertz DBA 201 8 inch Active Enclosure Subwoofer Masori
1242.9 PLN
The Hertz DBA 201 is an 8-inch (20 cm) active enclosure subwoofer with 220 W RMS and 440 W peak power. The design utilizes a dual passive radiator in the enclosure and an integrated low-pass filter. An automatic power-on and standby mode is available. The construction includes a high-density flux ferrite magnet, a cone made of pressed paper, and a copper voice coil with a diameter of 38.6 mm. The frequency response ranges from 32 to 400 Hz with an impedance of 0.4 Ohm. The operating voltage is between 6.5 to 18 VDC with a 15 A fuse and a 6 VDC start-stop voltage. The magnet size is 115 x 47 x 25 mm, and the weight is 6.7 kg. The PRE input signal turn-on is at 10 mV VRMS, remote IN power-on at 4 VDC (1 mA), and SPK input DC power-on at 2 VDC. Plug & play connection is available. Features 8-inch (20 cm) active enclosure subwoofer RMS power 220 W Peak power 440 W Impedance 0.4 Ohm Design: dual passive radiator in the enclosure Integrated low-pass filter Automatic power-on and standby mode Plug & play connection Magnet: high-density flux ferrite Cone: pressed paper Voice coil: copper Technical Specifications Speaker size 200 mm Voice coil diameter 38.6 mm Frequency response 32–400 Hz Magnet size 115 x 47 x 25 mm Weight 6.7 kg Operating voltage 6.5–18 VDC Fuse 15 A Start-stop voltage 6 VDC Max. current draw at 14.4 VDC (music power) 8.5 A Remote IN power-on 4 VDC (1 mA) PRE input signal turn-on 10 mV VRMS SPK input DC power-on 2 VDC
Hertz HMS 12 S4-LD-G 12 inch Subwoofer Masori
2054.47 PLN
The HMS 12 S4-LD-G is a 12 inch (30 cm) Subwoofer from Hertz in marine version. Designed for free-air application with single voice coil and 4 Ohm impedance. The RMS power is 500 W, the peak power is 1000 W. The depth is 191 mm, the voice coil diameter is 65.5. The grill features integrated LEDs and is paintable. The drive uses high-density ferrite, the diaphragm is made of polypropylene with UV inhibitors. Electroacoustic parameters include Xmax 19 mm, Fs 30 Hz, Re 3.3 Ohm, Le 0.62 mH, Vas 104.7 l, SPL 89.5 dB, as well as Qts 1, Qes 1.1, and Qms 12.9. The weight is 7.6 kg, and the magnet size measures 156 x 80 x 40 mm. Features 12 inch Subwoofer (30 cm) Marine version Free-Air application Single voice coil Impedance 4 Ohm RMS power 500 W Peak power 1000 W Depth 191 mm Grill with integrated LEDs Grill paintable Diaphragm polypropylene with UV inhibitors Magnet high-density ferrite Magnet size 156 x 80 x 40 mm Voice coil Ø 65.5 Weight 7.6 kg Technical specifications Size 300 mm Xmax 19 mm Re 3.3 Ohm Fs 30 Hz Le 0.62 mH Vas 104.7 l Mms 112 g Cms 0.247 mm/N BL 8 Tm Qts 1 Qes 1.1 Qms 12.9 Sound pressure 89.5 dB A 342.9 mm B 279.4 mm C 192.8 mm D 140.6 mm F 52.2 mm
Hertz HMS 12 S4-LD-SW 12 inch Subwoofer Masori
2054.47 PLN
HMS 12 S4-LD-SW is a 12 inch (30 cm) Subwoofer from Hertz in marine version with 4 Ohm single voice coil and a power handling of 500 W RMS as well as 1000 W Peak. The driver is designed for use with open baffle and utilizes a high-performance motor and suspension design. The linear excursion is 19 mm, the resonance frequency is 30 Hz, and the sound pressure level is 89.5 dB. The diaphragm is made of polypropylene with UV inhibitors, the magnet is high-density ferrite, and the voice coil has a diameter of 65.5 mm. An adaptable sport grill with integrated LEDs is included. The mounting depth is 191 mm, the magnet size is 156 x 80 x 40 mm, and the weight is 7.6 kg. Features 12 inch (30 cm) Subwoofer Marine version Single voice coil Impedance 4 Ohm Power handling RMS 500 W Power handling Peak 1000 W Designed for open baffle Sport grill with integrated LEDs High-performance motor and suspension design Diaphragm polypropylene with UV inhibitors Magnet high-density ferrite Voice coil Ø 65.5 mm Mounting depth 191 mm Weight 7.6 kg Technical specifications Size 300 mm Effective diameter (D) 300 mm Xmax 19 mm DC resistance (Re) 3.3 Ohm Resonance frequency (Fs) 30 Hz Inductance (Le) 0.62 mH Equivalent volume (Vas) 104.7 l Moving mass (Mms) 112 g Compliance (Cms) 0.247 mm/N Force factor (BL) 8 T*m Qts 1 Qes 1.1 Qms 12.9 Sound pressure level 89.5 dB Magnet size (W x D x H) 156 x 80 x 40 mm Dimension A 342.9 mm Dimension B 279.4 mm Dimension C 192.8 mm Dimension D 140.6 mm Dimension F 52.2 mm
Hertz Dieci DSK 165.3 6.5 inch speaker set Masori
412.66 PLN
The Dieci DSK 165.3 from Hertz is a 6.5 inch Speaker Set with a continuous power of 80 Watts and a peak power of 160 Watts. The system's impedance is 4 Ohms with a sensitivity of 93 dB SPL. The frequency response ranges from 50 Hz to 23 kHz. The woofers feature a V-Cone profile and a TPU surround. Additional features include a neodymium motor assembly and a PEI membrane for the high-frequency range. A Hi-Pass Crossover separates at 3.5 kHz with 12 dB octave. The system consists of compact woofers, tweeters, and passive filters directly at the connection cables. Features 6.5 inch (16.5 cm) Speaker Set Woofer with V-Cone Profile TPU Surround (Thermoplastic Polyurethane) Neodymium Motor Assembly PEI Membrane Power: 80 Watts RMS Power: 160 Watts Max Impedance: 4 Ohm Sensitivity: 93 dB SPL Frequency Response: 50 Hz - 23 kHz Hi-Pass Crossover: 3.5 kHz @ 12 dB octave Woofer Voice Coil: 25 mm diameter Weight Woofer: 0.74 kg Weight Tweeter: 0.03 kg Weight Crossover: 0.16 kg Technical Data D: 135 mm Re: 3.3 Ohm Fs: 67 Hz Le: 0.26 mH Vas: 14.6 l Mms: 11.3 g Cms: 0.51 mm/N BL: 4.2 T*m Qts: 0.81 Qes: 0.90 Qms: 7.59 Installation dimension A: 165 mm Installation dimension B: 144 mm Installation dimension C: 72 mm Installation dimension D: 64 mm
Hertz Cento CX 690 6x9 inch speaker set Masori
600.77 PLN
Cento CX 690 is a 6 x 9 inch speaker set from Hertz as an oval 3-way coaxial speaker with 4 Ohm, 100 W RMS, and 300 W peak. The construction includes an SPP-M diaphragm made of semi-pressed paper with mica and mica powder, as well as a wide rubber surround. The high-frequency system consists of a 40 mm tweeter and a 20 mm super tweeter with a neodymium magnet. The tweeter faceplate has been optimized with FEM simulations. The basket has a metallic finish and rubber magnet protection. A speaker grille made of ABS plastic with metallic finish and metal grille is provided. Frequency response 40 Hz to 23 kHz, efficiency 93.5 dB, Xmech 5.5 mm, and weight per speaker 1.55 kg. Additional specifications include a 30 mm woofer voice coil, a 28 mm tweeter voice coil, and magnet dimensions of 100 x 32 x 15 mm for the woofer and 19 x 3 mm for the tweeter. Features 6 x 9 inch speaker set Oval 3-way coaxial speaker Designed for horizontal installation position SPP-M diaphragm made of semi-pressed paper with mica, enhanced with mica powder Width rubber surround Woofer magnet ferrite with high density, low-carbon pole plates Basket with metallic finish and rubber magnet protection Tweeter faceplate design FEM-optimized Speaker grille made of ABS plastic with metallic finish and metal grille Tweeter 40 mm Super tweeter 20 mm Impedance 4 Ohm RMS power 100 W Peak power 300 W Frequency response 40 Hz – 23 kHz Weight per speaker 1.55 kg Technical specifications Tweeter diaphragm 40 mm Woofer voice coil Ø 30 mm Tweeter voice coil Ø 28 mm Woofer magnet size 100 x 32 x 15 mm Tweeter magnet size 19 x 3 mm Effective diameter D 139 mm Re 3.3 Ohm Fs 70 Hz Le 0.2 mH Vas 11.1 l Mms 13 g Cms 0.34 mm/N BL 4.9 T·m Qts 0.67 Qes 0.83 Qms 3.3 Sound pressure 93.5 dB Xmech 5.5 mm A 238 mm B 224 mm C 95 mm D 78.5 mm And 268 mm F 29 mm Woofer magnet ferrite with high density Tweeter magnet neodymium Diaphragm semi-pressed paper + mica
Hertz Cento CK 165 F 6.5 inch speaker set Masori
771.61 PLN
Hertz Cento CK 165 F is a 16.5 cm Speaker Set with C 26 Tweeter (26 mm Tetolon diaphragm, 20 mm voice coil) and flat CK 165 F mid-bass driver. The nominal power handling is 90 W RMS, the peak power handling is 270 W, and the impedance is 4 Ohms. The frequency response is 65–22.5 kHz with a sensitivity of 93 dB. The C 26 uses a neodymium magnet and a FEM-optimized faceplate geometry. The CK 165 F features a flat installation profile, a semi-pressed paper diaphragm with mica powder, a neodymium magnet, and low-carbon pole plates, as well as a pure copper voice coil on an aluminum former. The passive Crossover CCX 2 is ultra-compact, with high-frequency level adjustable in two steps (0, +3 dB), low-loss capacitors, pure copper coils, and ventilation slots. A metal Speaker Grille in a plastic frame is included. The crossover frequency of the filter is at 2.5 kHz with 12 dB/octave. Features 16.5 cm Speaker Set C 26 Tweeter with 26 mm Tetolon diaphragm and 20 mm voice coil Neodymium magnet on the tweeter Tweeter faceplate geometry optimized with FEM CK 165 F mid-bass driver with flat installation profile Semi-pressed paper diaphragm with mica powder Neodymium magnet and low-carbon pole plates on the mid-bass driver Pure copper voice coil on aluminum former (mid-bass driver) Ultra-compact passive Crossover CCX 2 High-frequency level adjustable: 0, +3 dB Low-loss capacitors and copper coils (crossover) Ventilation slots on the crossover Metal Speaker Grille in a plastic frame Slim basket with reduced depth Technical Specifications Size: 165 mm Power handling RMS: 90 W Power handling Peak: 270 W Impedance: 4 Ohms Sensitivity: 93 dB Frequency response: 65–22.5 kHz Crossover frequency: 2.5 kHz at 12 dB/oct. Crossover type: passive 2-way crossover Tweeter diaphragm: 26 mm Tweeter voice coil: 20 mm Mid-bass driver voice coil: 25 mm Weight of woofer: 0.72 kg Weight of tweeter: 0.03 kg Weight of crossover: 0.185 kg D: 134 mm Re: 2.7 Ohms Fs: 80 Hz Le: 0.154 mH Vas: 9.40 l Mms: 12 g Cms: 0.33 mm/N BL: 3.9 Tm Qts: 0.80 Qes: 1.00 Qms: 3.4 Spl: 93 dB
Hertz Cento CK 165 L 6.5 inch speaker set Masori
771.42 PLN
The Hertz Cento CK 165 L is a 6.5-inch (16.5 cm) Speaker Set with a passive 2-way crossover. It includes the C 26 Tweeter with a 26 mm Tetolon diaphragm and a 20 mm voice coil, as well as the CK 165 L mid-bass driver with a non-pressed paper diaphragm, a 25 mm voice coil on an aluminum carrier, and a neodymium magnet with low-carbon pole plates. The CCX 2T and CCX 2W crossovers are separate and ultra-compact, and the high-frequency level is adjustable in three steps. Performance data: 100 W RMS, 300 W Peak, 4 Ohm impedance, sensitivity of the Tweeter 92 dB and the mid-bass driver 91 dB, frequency response 50 to 22.5 kHz. The filters operate at 3.8 kHz with 6 dB/Oct (LP) and 12 dB/Oct (HP). Additional features include FEM-optimized faceplate geometry, a compact 3-spoke chassis with rubber protection for the magnet, and a metal Speaker Grille in a plastic frame. Features 6.5-inch (16.5 cm) Speaker Set RMS power 100 W Peak power 300 W Impedance 4 Ohm Frequency response 50–22.5 kHz Sensitivity of Tweeter 92 dB SPL Sensitivity of mid-bass driver 91 dB SPL C 26 Tweeter with 26 mm Tetolon diaphragm Tweeter voice coil 20 mm Neodymium magnet on the Tweeter FEM-optimized faceplate geometry Installation accessories CK 165 L mid-bass driver with non-pressed paper diaphragm Mid-bass driver voice coil 25 mm on aluminum carrier Neodymium magnet with low-carbon pole plates on the mid-bass driver Compact 3-spoke basket, rubber protection for the magnet Metal Speaker Grille with plastic frame Separate, ultra-compact crossovers CCX 2T and CCX 2W High-frequency level adjustable in three steps (-2, 0, +2 dB) Low-loss components, pure copper coils Passive 2-way crossover design Technical Specifications Crossover filter: LP 6 dB/Oct at 3.8 kHz, HP 12 dB/Oct at 3.8 kHz Tweeter diaphragm 26 mm Tweeter voice coil Ø 20 mm Mid-bass driver voice coil Ø 25 mm D 131.5 mm Re 3.2 Ohm Fs 60 Hz Le 0.23 mH Vas 13.66 l Mms 14.2 g Cms 0.52 mm/N BL 4.9 Tm Qts 0.60 Qes 0.70 Qms 3.8 SPL 91 dB Weight of Tweeter 0.037 kg Weight of crossover 0.037 kg
Hertz Cento CX 130 5 Inch Coaxial Speakers Masori
403.69 PLN
Hertz Cento CX 130 is a 5 inch (13 cm) coaxial speaker with a 2-way design and 130 mm nominal size. Equipped with a 24 mm soft Tetolon tweeter with ferrofluid cooling and RHFC Rotary High Frequency Contour for alignment. The tweeter front plate is optimized through FEM simulation. The woofer uses a 25 mm voice coil on an aluminum carrier and a 130 mm SPP-M membrane made of semi-pressed paper with mica. A high-density ferrite magnet with low-carbon pole plates and a compact 3-spoke basket with rubber magnet protection are integrated. Nominal load capacity 50 W RMS, peak load capacity 150 W, impedance 4 Ohm. Frequency response 65–22,000 Hz, weight per speaker 0.73 kg, Xmech 3.8 mm, tweeter with neodymium magnet. Features 5 inch (13 cm) coaxial speaker 2-way coaxial system 24 mm Soft Tetolon Tweeter, ferrofluid-cooled RHFC Rotary High Frequency Contour Tweeter, adjustable FEM-optimized Tweeter Faceplate 25 mm voice coil on the woofer on aluminum carrier 130 mm SPP-M membrane made of semi-pressed paper with mica High-density ferrite magnet with low-carbon pole plates on the woofer Neodymium Tweeter Magnet Compact 3-spoke basket with rubber magnet protection Speaker Grille made of ABS with metallic finish and metal grille Technical Data Size: 130 mm RMS Power: 50 W Peak Power: 150 W Impedance: 4 Ohm Woofer Voice Coil: 25 mm Ø Tweeter Voice Coil: 13 mm Ø Frequency Response: 65–22,000 Hz Tweeter Magnet Size B x H: 13 x 2 mm Weight per Speaker: 0.73 kg Xmech: 3.8 mm Effective Diameter D: 110 mm Re: 3.1 Ohm Fs: 80 Hz Le: 0.18 mH Vas: 13.5 l Mms: 7.6 g Cms: 0.50 mm/N BL: 4.2 T·m Qts: 0.56 Qes: 0.67 Qms: 3.5 Sound Pressure: 92.5 dB Dimension A: 130 mm Dimension B: 119 mm Dimension C: 65.5 mm Dimension D: 156 mm Dimension E: 156 mm Dimension F: 21 mm
Hertz Cento CK 165 6.5 inch speaker set Masori
771.45 PLN
The Cento CK 165 is a 6.5-inch (16.5 cm) Speaker Set from Hertz featuring the C 26 Tweeter with a 26 mm Tetolon diaphragm and a 20 mm voice coil, as well as the C 165 mid-bass driver with a 165 mm SPP-M semi-pressed paper diaphragm with mica. The Tweeter uses a neodymium magnet with high magnetic flux and a FEM-optimized front plate. The mid-bass driver has a 25 mm voice coil aluminum former, a flux ferrite magnet, and a compact three-spoke basket with a rubber magnet cover. The passive 2-way Crossover CCX 2 separates at 2.5 kHz with 12 dB/oct. and offers a three-position switch for the Tweeter level at 0 and +3 dB. The nominal power handling is 95 W RMS, the peak power handling is 285 W, the impedance is 4 Ohms, the sensitivity is 93 dB SPL, and the frequency response is 55 Hz to 22.5 kHz. Speaker Grilles are included. Features 6.5-inch (16.5 cm) Speaker Set Passive 2-way system with CCX 2 Crossover Tweeter C 26: 26 mm Tetolon dome, 20 mm voice coil Neodymium magnet on the Tweeter with high magnetic flux FEM-optimized Tweeter front plate Mid-bass driver C 165: 165 mm SPP-M semi-pressed paper diaphragm with mica Flux ferrite magnet on the mid-bass driver 25 mm voice coil with aluminum former on the mid-bass driver Compact three-spoke basket, acoustically combined with rubber magnet cover ABS Speaker Grille with metallic finish and protective metal grille CCX 2: Three-position switch for Tweeter level 0, +3 dB CCX 2: Capacitors with low loss factor and low-resistance inductors made of pure copper CCX 2: Compact design with metallic finish and ventilation slots Accessories for integration into OEM placements Speaker Grille included Technical Specifications Nominal power handling RMS 95 W Peak power handling 285 W Impedance 4 Ohms Sensitivity 93 dB SPL Frequency response 55 Hz – 22.5 kHz Crossover frequency 2.5 kHz @ 12 dB/oct. Crossover type Passive, 2-way Size 165 mm Tweeter diaphragm 26 mm Tweeter voice coil Ø 20 mm Mid-bass driver voice coil Ø 25 mm D 131.5 mm Re 3.2 Ohms Fs 60 Hz Le 0.2 mH Vas 13.24 l Mms 13.9 g Cms 0.51 mm/N BL 4.9 T·m Qts 0.59 Qes 0.69 Qms 3.9 Weight of mid-bass driver 0.96 Weight of Tweeter 0.03 kg Weight of Crossover 0.185 kg
Hertz Cento CK 130 5 Inch Speaker Set Masori
728.75 PLN
The Cento CK 130 is a 5 Inch (13 cm) Speaker Set from Hertz in a 2-way design with a passive 2-way crossover and a crossover frequency of 2.5 kHz at 12 dB/Oct. A Tetolon tweeter with a 26 mm diaphragm and 20 mm voice coil combines with a 130 mm mid-woofer with a 25 mm voice coil. The impedance is 4 Ohm, the sensitivity is 92.5 dB SPL, and the frequency response ranges from 65 Hz to 22.5 kHz. The power handling is 70 W RMS and 210 W Peak. An oversized ferrite magnet, ultra-compact crossovers, and a durable speaker grille are integrated. Features 5 Inch (13 cm) Speaker Set 2-Way System Passive 2-Way Crossover Crossover Frequency 2.5 kHz, 12 dB/Oct Tetolon Tweeter Mid-Woofer Oversized Ferrite Magnet Ultra-Compact Crossovers Durable Speaker Grille Size 130 mm Tweeter Diaphragm 26 mm Woofer Voice Coil 25 mm Tweeter Voice Coil 20 mm Impedance 4 Ohm Sensitivity 92.5 dB SPL Frequency Response 65 Hz – 22.5 kHz RMS Power 70 W Peak Power 210 W Technical Data D 110 mm Re 3.1 Ohm Fs 80 Hz Le 0.17 mH Vas 6.30 l Mms 8 g Cms 0.50 mm/N BL 4.1 T·m Qts 0.61 Qes 0.72 Qms 3.9 Weight Woofer 0.7 kg Weight Tweeter 0.03 kg Weight Crossover 0.185 kg
Hertz Cento Pro CPX 690 6x9 inch speaker set Masori
899.71 PLN
Hertz Cento Pro CPX 690 is a 6 x 9 inch speaker set in a 3-way design. It combines Neodymium tweeter and Neodymium super tweeter with Tetolon domes, as well as a water-repellent pressed paper membrane and a wide rubber surround. The woofer uses a ferrite magnet and a 30 mm voice coil; the tweeter features a 28 mm voice coil and a 32 mm tweeter membrane. The metal basket relies on a radial venting system; the front plate geometry is FEM-optimized. The load capacity is 120 W RMS and 360 W peak at 4 Ohm impedance, with a frequency response ranging from 35 to 24,000 Hz. An ABS plastic frame with a metal surface and protective metal grille is integrated. Xmech is 7.5 mm, and the weight is 1.63 kg. Features 6 x 9 inch speaker set 3-way design Neodymium tweeter and Neodymium super tweeter with Tetolon domes Water-repellent pressed paper membrane Width rubber surround Metal basket with radial venting system FEM-optimized geometry of membrane and front plate Ferrite magnet and low-carbon pole plates on the woofer Vibration-damping rubber magnet cover on the basket ABS plastic frame with metal surface and protective metal grille RMS power 120 W Peak power 360 W Impedance 4 Ohm Frequency response 35 - 24,000 Hz Technical specifications Size 6 x 9 inches RMS power 120 W Peak power 360 W Impedance 4 Ohm Frequency response 35 - 24,000 Hz Tweeter membrane 32 mm Woofer voice coil Ø 30 mm Tweeter voice coil Ø 28 mm Woofer magnet size 90 x 40 x 20 mm Tweeter magnet size 27.8 x 3 mm Woofer magnet Ferrite Tweeter magnet Neodymium Membrane water-repellent pressed paper Dome material Tetolon Xmech 7.5 mm Weight 1.63 kg D 172 mm Re 3.4 Ohm Fs 68 Hz Le 0.53 mH Vas 15.8 liters Mms 26.5 g Cms 0.21 mm/N BL 6.0 Tm Qts 0.77 Qes 1.10 Qms 2.7 Sound pressure level 94 dB A 237.5 mm B 225 mm C 103 mm D 85 mm E 269 mm F 28.5 mm
Hifonics Titan TDA-200R (Active) 8 Inch Active Enclosure Subwoofer
1134.56 PLN
The Titan TDA-200R Active product is an 8-inch (20 cm) active enclosure subwoofer from Hifonics in the Titan TD series. The system utilizes an active dual bass reflex design with 2 x 20 cm and an integrated Class D amplifier. The enclosure is robustly constructed and features internal bracing. It comes with chrome protection bars, a front in carbon look foil, and a logo sticker. Technical specifications include 300 W RMS, 600 W MAX, LP 50 - 150 Hz @ 12/18 dB, phase shift 0°/180°, bass boost 0 - 12 dB, fixed subsonic 15 Hz, automatic power-on function via high-level inputs, RCA inputs, bass level remote control, and dimensions of 65 x 29 x 31/25 cm. Features 8-inch (20 cm) active enclosure subwoofer Active dual bass reflex with 2 x 20 cm Integrated Class D amplifier Sturdy enclosure with internal bracing Chrome protection bars Front in carbon look (foiled) Logo sticker Titan TD series Technical Specifications RMS power: 300 W MAX power: 600 W LP 50 - 150 Hz @ 12/18 dB Phase shift 0°/180° Bass boost 0 - 12 dB Fixed subsonic 15 Hz Automatic power-on function via high-level inputs RCA inputs Bass level remote control Dimensions: 65 x 29 x 31/25 cm
Hertz Mille Legend ML 2000.3 8 inch Subwoofer Masori
2395.59 PLN
The Hertz Mille Legend ML 2000.3 is an 8-inch Subwoofer with a diameter of 200 mm, designed for 700 W RMS and 1400 W peak power at 4 Ohms. A 100 mm CCAW voice coil, wound In/Out on a TIL former, along with a neodymium magnet measuring 95 x 28 x 5 mm, forms the drive. The frequency response ranges from 30–600 Hz, the linear excursion Xmax is 13 mm, and the mechanical excursion Xmech is ±23 mm. The diaphragm is made of pressed paper with mineral powders, complemented by exponential V-cone geometry and Boundary Free IIR rubber surround. The basket is made from an aluminum alloy with integrated ventilation holes and a CNC-machined, diamond-cut basket edge featuring the Hertz logo; the magnetic circuit uses CNC-machined low-carbon plates and an aluminum shorting ring at the pole. Electroacoustic parameters: D 165 mm, Re 2.7 Ohm, Fs 40 Hz, Le 0.72 mH, Vas 9.5 l, Mms 110 g, Cms 0.15 mm/N, BL 11 T*m, Qts 0.56, Qes 0.63, Qms 5, sound pressure 86 dB. Physical dimensions: A 217 mm, B 138 mm, C 138 mm, D 117 mm, E 223 mm, F 46 mm, weight 6.120 kg. For sealed enclosures, 10 to 17 liters are recommended. Features 8-inch Subwoofer Diameter 200 mm RMS power 700 W Peak power 1400 W Impedance 4 Ohm Frequency response 30–600 Hz Voice coil 100 mm, CCAW, wound In/Out, TIL former Neodymium magnet, FEA-optimized Pole with aluminum shorting ring Boundary Free IIR rubber surround Exponential V-cone geometry Diaphragm made of pressed paper with mineral powders Basket made of aluminum alloy with integrated ventilation holes CNC-machined, diamond-cut basket edge with Hertz logo Optimized for sealed enclosures 10–17 liters Xmax 13 mm Xmech ±23 mm Weight 6.120 kg Technical Specifications Effective diaphragm diameter D 165 mm Re 2.7 Ohm Fs 40 Hz Le 0.72 mH Vas 9.5 liters Mms 110 g Cms 0.15 mm/N BL 11 T*m Qts 0.56 Qes 0.63 Qms 5 Sound pressure 86 dB Magnet size 95 x 28 x 5 mm Dimension A 217 mm Dimension B 138 mm Dimension C 138 mm Dimension D 117 mm Dimension E 223 mm Dimension F 46 mm Sealed enclosure compact: Volume 10 liters Enclosure data sealed: Volume 17 liters; Fb 50 Hz; Qtc 0.85; B 450 mm; H 350 mm; T 190 mm; Cutout diameter 236 mm; Wood thickness 19 mm Enclosure data sealed power: Volume 17 liters; Fb 50 Hz; Qtc 0.70; B 350 mm; H 300 mm; T 250 mm; Mounting hole 186 mm; Wood thickness 19 mm
Hifonics Zeus ZRX8D2 8 Inch Subwoofer Masori
815.54 PLN
The Hifonics Zeus ZRX8D2 is an 8-inch (20 cm) Subwoofer. It uses a dual magnet with 2 x 1.7 kg as well as a 64 mm dual voice coil with X-Max +/- 17 mm. The double-stitched, ribbed surround and a dual polycotton spider with double centering are integrated. Ventilation and pole core drilling are present. The diaphragm is made of handcrafted, coated paper, combined with an aluminum die-cast basket and blue magnet protector. The impedance is 2 + 2 ohms, the nominal power is 600 W RMS, and the peak power is 1200 W MAX. Specifications: Fs 40.4 Hz, Qts 0.43, VAS 6.1 L, 82 dB, and dimensions Ø 184 mm and ‡ 144 mm. Features 8-inch (20 cm) Subwoofer Dual magnet 2 x 1.7 kg 64 mm dual voice coil X-Max +/- 17 mm Double-stitched, ribbed surround Dual polycotton spider with double centering Ventilation and pole core drilling Handcrafted, coated paper diaphragm Aluminum die-cast basket Blue magnet protector Impedance 2 + 2 ohms RMS power 600 W Peak power 1200 W Technical Specifications Fs 40.4 Hz Qts 0.43 VAS 6.1 L 82 dB Dimensions Ø 184 mm Dimensions ‡ 144 mm
Hifonics MRX200A 8 Inch Active Enclosure Subwoofer Masori
656.13 PLN
The MRX200A is an 8-inch active enclosure subwoofer from Hifonics in an aluminum die-cast housing. The integrated Class D Amplifier delivers 125 watts RMS and 250 watts max. Features include low pass 40–200 Hz, subsonic 30 Hz, a phase switch 0/180 degrees, and a bass boost of 0–12 dB at 45 Hz. Connections are via RCA and there is an automatic power-on function through high-level inputs. A wired bass remote is included, along with dimensions of 25 cm in diameter, 8 cm in height, and a weight of 4.6 kg. Features 8-inch active enclosure subwoofer Aluminum die-cast housing Class D Amplifier RCA inputs Automatic power-on function through high-level inputs Wired bass remote Diameter 25 cm Height 8 cm Weight 4.6 kg Technical Specifications Power RMS 125 watts Power max 250 watts Low pass 40–200 Hz Subsonic 30 Hz Phase switch 0 degrees/180 degrees Bass boost 0–12 dB at 45 Hz
Deaf Bonce Machete Fight MF-08S 8 inch subwoofer Masori
549.04 PLN
The Machete Fight MF-08S is an 8-inch (20 cm) Subwoofer from Deaf Bonce. It delivers 600 W RMS and 1200 W peak power. The construction includes a paper cone, foam surround, ferrite magnet, and a steel frame, with the voice coil wire made of copper. The voice coil measures 2.00 inches. The linear excursion is 12 mm in each direction, and the mechanical excursion is 24 mm. Available impedance variants are 2+2 or 4+4 ohms. Specified parameters are SPL 84.00/84.30 dB, Fs 48.00/48.20 Hz, Qts 0.41/0.42, BL 15.10/15.40, and Vas 7.50/7.90 L. The mounting depth is 115 mm, the cutout size is 183.0 mm, and the weight is 4.5 kg. Features 8-inch (20 cm) Subwoofer RMS power: 600 W Peak power: 1200 W Impedance: 2+2 or 4+4 ohms Xmax: 12 mm in each direction Xmech: 24 mm Cone: Paper Surround: Foam Magnet: Ferrite Frame: Steel Voice coil wire: Copper Mounting depth: 115 mm Cutout size: 183.0 mm Weight: 4.5 kg Technical Specifications Voice coil size: 50.8 mm SPL: 84.00 / 84.30 dB Fs: 48.00 / 48.20 Hz Qts: 0.41 / 0.42 BL: 15.10 / 15.40 Vas: 7.50 / 7.90 L
Hertz DBA 201F 8 inch Active Enclosure Subwoofer Masori
1284.85 PLN
The Hertz DBA 201F is an 8-inch (20 cm) active enclosure subwoofer with a super flat sealed design. The RMS power is 220 W, and the peak power is 440 W. The impedance is 0.4 Ohm, and the frequency response is 32–400 Hz. The voice coil has a diameter of 38.6 mm and is made of copper, while the cone is made of pressed paper. The enclosure is optimized with FEM simulations, and the magnet is high-density flux ferrite measuring 110 x 45 x 17 mm. The system operates at 6.5–18 VDC with a 15 A fuse and supports start-stop from 6 VDC. Automatic on and off is done via remote IN, PRE, or SPK input; the maximum consumption is 8.5 A at 14.4 VDC. The weight is 4.3 kg. Features 8-inch (20 cm) active enclosure subwoofer Construction: super flat sealed Enclosure optimized with FEM simulations RMS power: 220 W Peak power: 440 W Impedance: 0.4 Ohm Frequency response: 32–400 Hz Size: 200 mm Voice coil: Ø 38.6 mm Voice coil material: copper Cone: pressed paper Magnet: high-density flux ferrite Weight: 4.3 kg Automatic on/off Technical Specifications Magnet size: 110 x 45 x 17 mm Operating voltage: 6.5–18 VDC (fuse 15 A) Start-stop voltage: 6 VDC Consumption at 14.4 VDC (max. music power): 8.5 A Remote IN activation: 4 VDC (1 mA) PRE input signal to activate: 10 mV RMS SPK input DC activation: 2 VDC
Hertz Dieci DBA 201 F 8 inch Active Enclosure Subwoofer Masori
1284.85 PLN
The Der Dieci DBA 201 F from Hertz is an 8-inch active enclosure subwoofer in a super flat, sealed design. The enclosure has been optimized using FEM simulation to maximize the performance of the 8-inch driver while minimizing space requirements. The continuous power handling is rated at 220 watts RMS, while the peak power is 440 watts. Features include a massive ferrite magnet with high flux density, a 38.6 mm copper voice coil, and a diaphragm made of pressed paper. The system's impedance is specified at 0.4 ohms. An integrated 24 dB/octave low-pass crossover filter allows for a variable crossover frequency between 50 and 150 Hz. Other technical components include a subsonic filter at 15 Hz, an adjustable bass boost of 0 to 6 dB at 45 Hz, and a phase switch for 0 or 180 degrees. Features 8-inch (20 cm) active enclosure subwoofer Design: Super flat, sealed Continuous power handling: 220 watts RMS Peak power: 440 watts Impedance: 0.4 ohms Diaphragm material: Pressed paper Magnet material: Ferrite with high flux density Voice coil: Copper, 38.6 mm diameter Integrated 24 dB/octave low-pass crossover filter Subsonic filter: 15 Hz at 24 dB/octave Adjustable bass boost: 0 - 6 dB at 45 Hz Phase switch: 0 / 180 degrees Automatic on and off switching via audio sense circuit Includes sub remote control HRC 01 for volume adjustment Technical Specifications Frequency response: 32 - 400 Hz Dimensions (H x W x D): 345 mm x 245 mm x 79 mm Magnet size: 110 mm x 45 mm x 17 mm Weight: 4.3 kg Operating voltage: 6.5 - 18 VDC Start-stop voltage: 6 VDC Maximum current draw at 14.4 VDC: 8.5 A Idle current: 260 mA Input sensitivity PRE input: 0.2 - 5 VRMS Input sensitivity SPK input: 1.2 - 30 VRMS Signal-to-noise ratio: 100 dBA Total harmonic distortion (THD) at 100 Hz: 0.15 %
Hertz Cento C 165 F 6.5 inch midbass driver Masori
386.99 PLN
The Cento C 165 F is a 6.5 inches (16.5 cm) mid-bass speaker from Hertz with a flat profile and flat speaker basket. Equipped with SPP-M diaphragm (semi-pressed paper with mica) and high-density ferrite magnet. Impedance 4 Ohm, voice coil Ø 25 mm made of pure copper on aluminum carrier. Power handling 70 W RMS and 180 W Peak. Frequency response 65–4,500 Hz, Xmech 3.5 mm. Magnet size 90 x 32 x 10 mm, weight 0.72 kg. Electroacoustic values: D 134 mm, Re 2.7 Ohm, Fs 80 Hz, Le 0.154 mH, Vas 9.40 l, Mms 12 g, Cms 0.33 mm/N, BL 3.9 Tm, Qts 0.80, Qes 1.00, Qms 3.4, Spl 93 dB. Dimensions: A 165 mm, B 141 mm, C 50.6 mm, D 43.5 mm. Features 6.5 inches (16.5 cm) mid-bass speaker Flat profile Flat speaker basket SPP-M diaphragm (semi-pressed paper with mica) Magnet: High-density ferrite Pure copper voice coil on aluminum carrier Impedance: 4 Ohm Power handling RMS: 70 W Power handling Peak: 180 W Frequency response: 65–4,500 Hz Weight per speaker: 0.72 kg Technical specifications Diameter: 165 mm Effective diaphragm diameter (D): 134 mm Voice coil: Ø 25 mm Magnet size (B x T x H): 90 x 32 x 10 mm Xmech: 3.5 mm Fs: 80 Hz Re: 2.7 Ohm Le: 0.154 mH Vas: 9.40 l Mms: 12 g Cms: 0.33 mm/N BL: 3.9 Tm Qts: 0.80 Qes: 1.00 Qms: 3.4 Sound pressure: 93 dB Dimension A: 165 mm Dimension B: 141 mm Dimension C: 50.6 mm Dimension D: 43.5 mm
Audio System R 08 EVO 8 inch Subwoofer Masori
430.61 PLN
The Audio System R 08 EVO is an 8-inch (20 cm) Subwoofer with a 1.5-inch (38.1 mm) voice coil, larger magnet system with HEM Magnet and improved T-Joke design. Features include LLE, reinforced dust cap, stable terminals, multiple ventilation system, and a membrane made of HPPC. The mechanics include a PPTA Connex Spider and woven strands, complemented by magnet protection and pole core drilling. The impedance is 2x 4 Ohm, the power is 2x 250 Watts and 2x 150 Watts. The installation depth is 107 mm, the installation diameter is 178 mm, and the outer diameter is 214 mm. Features 8-inch (20 cm) Subwoofer 1.5-inch (38.1 mm) voice coil Larger magnet system with HEM Magnet (High Efficient Magnet) Improved T-Joke design LLE (Long Life Edge) Reinforced dust cap Stable terminals Multiple ventilation system HPPC membrane (High Pressed Paper Cone) PPTA Connex Spider Woven strands Magnet protection Pole core drilling Technical Data Impedance: 2x 4 Ohm Power: 2x 250 Watts Power: 2x 150 Watts Installation depth: 107 mm Installation Ø: 178 mm Outer Ø: 214 mm
Hertz Cento C 165 L 6.5 inch midbass driver Masori
387.07 PLN
The Hertz Cento C 165 L is a 6.5 inch (16.5 cm) mid-bass driver with a water-resistant, non-pressed paper diaphragm. The impedance is 4 Ohms. The RMS power handling is 80 W. The peak power handling is 240 W. The frequency response ranges from 50 to 5000 Hz. The voice coil has a diameter of 25 mm, and the magnet is a ferrite with high flux density. Xmech 6.1 mm, magnet size 85 x 32 x 17 mm, and weight 0.973 kg. Electroacoustic parameters D 131.5 mm, Re 3.2 Ohms, Fs 60 Hz, Le 0.23 mH, Vas 13.66 l, Mms 14.2 g, Cms 0.52 mm/N, BL 4.9 T*m, Qts 0.60, Qes 0.70, Qms 3.8, and a sound pressure level of 91 dB. Dimensions A 165 mm, B 142 mm, C 71 mm, D 62.5 mm. Features 6.5 inch (16.5 cm) mid-bass driver Water-resistant, non-pressed paper diaphragm Impedance 4 Ohms RMS power handling 80 W Peak power handling 240 W Frequency response 50–5000 Hz Voice coil Ø 25 mm Ferrite magnet with high flux density Xmech 6.1 mm Technical Specifications Component: Woofer Size 165 mm D 131.5 mm Re 3.2 Ohms Fs 60 Hz Le 0.23 mH Vas 13.66 l Mms 14.2 g Cms 0.52 mm/N BL 4.9 T*m Qts 0.60 Qes 0.70 Qms 3.8 Sound pressure level 91 dB Magnet size (W x D x H) 85 x 32 x 17 mm Weight 0.973 kg Dimensions A 165 mm, B 142 mm, C 71 mm, D 62.5 mm
Hifonics Zeus ZXS8S 8 Inch Enclosure Subwoofer Masori
645.44 PLN
The Zeus ZXS8S from Hifonics is an Enclosed Subwoofer with a diameter of 8 inches (20 cm). The system is designed as a compact, sealed box and has an impedance of 4 Ohms. A Zeus ZXS8D2 Subwoofer is integrated into the enclosure. The rated power is 300 Watts RMS, while the maximum power is specified at 600 Watts. The dimensions of the enclosure are 260/190 x 295 x 300 mm. Features 8 inches (20 cm) Enclosed Subwoofer 8 inches Single sealed box Integrated Zeus ZXS8D2 Subwoofer Power: 300 Watts RMS Power: 600 Watts Max. Impedance: 4 Ohms Dimensions: 260/190 x 295 x 300 mm
Hertz Cento Pro CPK 690 6x9 Inch Speaker Set Masori
933.99 PLN
The Cento Pro CPK 690 is a 6 inch x 9 inch Speaker Set from Hertz with a 2-way design. The power handling is 120 W RMS and 360 W Peak at 4 Ohm, with a sensitivity of 92 dB SPL and a frequency response of 35 Hz to 22.5 kHz. The Tweeter uses a 29 mm Soft-Tetolon diaphragm and a 25 mm voice coil with ferrofluid cooling, as well as a Center Tuning Duct, neodymium magnet, damped rear chamber, and a FEM-optimized faceplate geometry. The mid-bass driver features a pressed paper diaphragm with FEM-optimized geometry, a dual-layer voice coil, a neodymium magnet with low-carbon pole plates, a compact 3-spoke basket, and a rubberized magnet cover. The CPCX 690 Crossover offers an adjustable high-frequency level in three steps -2 dB, 0 dB, +2 dB, a crossover frequency of 3.1 kHz, slopes of 12 dB/Oct for the Tweeter and 6 dB/Oct for the mid-bass driver, as well as 160 V capacitors and pure copper coils in a compact housing with ventilation slots. The weights are 1.69 kg for the woofer, 0.07 kg for the Tweeter, and 0.2 kg for the Crossover. Electroacoustic parameters: D 172 mm, Re 3.2 Ohm, Fs 58 Hz, Le 0.33 mH, Vas 22.80 liters, Mms 25.3 g, Cms 0.30 mm/N, BL 6.9 T m, Qts 0.48, Qes 0.62, Qms 2.2, and SPL 92.5 dB. Features 6 inch x 9 inch Speaker Set 2-way system Pressed paper diaphragm with FEM-optimized geometry (mid-bass driver) Dual-layer voice coil (mid-bass driver) Neodymium magnet with low-carbon pole plates (mid-bass driver) Compact 3-spoke basket, rubberized magnet cover 29 mm Soft Tetolon Tweeter diaphragm 25 mm Tweeter voice coil with ferrofluid cooling Center Tuning Duct geometry (Tweeter) Rear chamber with damping material (Tweeter) FEM-optimized faceplate geometry Adjustable high-frequency level -2 dB, 0 dB, +2 dB Crossover with 160 V capacitors and pure copper coils Compact crossover design in metallic look with ventilation slots Technical Specifications Speaker size 152.4 x 228.6 mm Power handling RMS 120 W Power handling Peak 360 W Impedance 4 Ohm Sensitivity 92 dB SPL SPL 92.5 dB Frequency response 35 Hz – 22.5 kHz Crossover type 2 way High-frequency level -2/0/+2 dB Crossover frequency Tweeter 3.1 kHz Crossover slopes HP 12 dB/Oct, LP 6 dB/Oct Tweeter diaphragm 29 mm Tweeter voice coil Ø 25 mm Mid-bass driver voice coil Ø 30.5 mm D 172 mm Re 3.2 Ohm Fs 58 Hz Le 0.33 mH Vas 22.80 liters Mms 25.3 g Cms 0.30 mm/N BL 6.9 T m Qts 0.48 Qes 0.62 Qms 2.2 Weight woofer 1.69 kg Weight Tweeter 0.07 kg Weight Crossover 0.2 kg
Hertz HMS HMS 10 S4-LD-G.1" (25cm) Subwoofer Masori
1541.32 PLN
The HMS 10 S4-LD-G.1 from Hertz is a 10-inch Subwoofer with a nominal power handling of 300 Watts RMS and a peak power handling of 600 Watts Peak. The model features a polypropylene diaphragm with UV inhibitors and a sporty Grille with integrated LED lighting. The construction is optimized for marine use as well as Free Air operation, so no special enclosure is required. The Subwoofer has a 50 mm voice coil and a magnet system made of high-density flux ferrite. The physical specifications include a mounting depth of 116 mm and a total weight of 5.1 kg. The design allows for free color customization of the removable Grille through painting. Features 10-inch (25 cm) Subwoofer Power: 300 Watts RMS Power: 600 Watts Peak Polypropylene diaphragm with UV inhibitors Integrated LED lighting in the Grille Optimized for Free Air operation Removable and paintable sporty Grille Magnet made of high-density flux ferrite Voice coil with a diameter of 50 mm Xmech: ±19 mm Weight: 5.1 kg Technical Specifications Mounting depth: 116 mm Total diameter (A): 280 mm Mounting diameter (B): 227 mm Magnet diameter (C): 164 mm Total height (F): 48 mm Magnet size: 140 x 60 x 30 mm Impedance (Re): 4.5 Ohm Resonance frequency (Fs): 41 Hz Vas: 37 liters Xmax: 13.5 mm Qts: 0.71 Spl: 88 dB Mms: 69 g Cms: 0.22 mm/N BL: 10.2 T*m Le: 0.9 mH
Hertz Dieci DCX 100.3 4 inch coaxial speakers Masori
232.84 PLN
The Dieci DCX 100.3 from Hertz is a 4 inch coaxial speaker with a continuous power handling of 30 W and a peak value of 60 W. The system has an impedance of 4 Ohm and an installation depth of 50 mm. A high-density ferrite magnet is used in the subwoofer, while a neodymium magnet is used in the tweeter. The membrane is made of water-repellent pressed paper and the dome is made of PEI. A TPU surround and built-in crossovers are also part of the construction. The frequency response ranges from 70 Hz to 21 kHz. Features 4 inch (10 cm) coaxial speaker Power: 30 W RMS Power: 60 W Max Impedance: 4 Ohm Water-repellent membrane made of pressed paper Neodymium magnet in the tweeter High-density ferrite magnet in the subwoofer TPU surround and PEI dome Built-in crossovers Installation depth: 50 mm Technical specifications Frequency response: 70 Hz - 21 kHz Size: 100 mm Subwoofer magnet size: 70 x 32 x 10 mm Weight of one speaker: 0.45 kg D: 85 mm Re: 3.3 Ohm Fs: 115 Hz Vas: 1.7 l Mms: 5.0 g Cms: 0.38 mm/N BL: 3.5 T*m Qts: 0.79 Qes: 0.96 Qms: 4.33 Spl: 92 dB Dimension A: 99 mm Dimension A3: 129 mm Dimension B: 94 mm Dimension C: 50 mm Dimension D: 43 mm
Audison Prima APS 10 S4S 10 Inch Subwoofer Masori
900.9 PLN
The Audison Prima APS 10 S4S is a 10-inch (25 cm) Subwoofer with a single 4-ohm voice coil. The design features an ultra-flat profile of 120 mm and is intended for sealed enclosures starting from 10 liters. The power handling is 400 W continuous and 800 W peak. The magnetic system uses High Density Flux Ferrite, and the voice coil measures 60 mm in diameter. The water-resistant treated, pressed paper cone and the cone dust cap basket geometry were developed using FEM and optimized with the Klippel Scan Vibrometer. Xmax is 12.6 mm, Xmech is 18 mm, Fs is 28.5 Hz, Vas is 39.62 liters, and Qts is 0.68. D 220 mm, dimensions A 270 mm, B 233 mm, C 105 mm, and D 88 mm, weight 5.24 kg. Includes steel grille and plastic gasket; basket with venting openings below the spider. Single voice coil design for combination with AP F8.9 Bit (2 CH, bridged, 260 Watts RMS). Features 10-inch (25 cm) Subwoofer Single voice coil 4 Ohm Ultra-flat profile 120 mm Optimized for sealed enclosures starting from 10 liters Water-resistant treated, pressed paper cone High Density Flux Ferrite magnetic system Basket with venting openings below the spider Cone dust cap basket geometry, FEM developed and optimized with Klippel Massive motor assembly, FEM optimized Includes steel grille and plastic gasket Single voice coil design for combination with AP F8.9 Bit (2 CH, bridged, 260 Watts RMS) Technical Specifications Size 250 mm Power handling peak 800 W Power handling continuous 400 W Impedance 4 Ohm Voice coil Ø 60 mm Cone material water-resistant treated, pressed paper Magnet material High Density Flux Ferrite Xmax 12.6 mm Xmech 18 mm D 220 mm Re 3.7 Ohm Fs 28.5 Hz Vas 39.62 liters Mms 160 g Cms 0.2 mm/N BL 12.9 T·m Qms 6.9 Qes 0.75 Qts 0.68 Le Standard 1.9 mH Spl 83.5 dB Driver displacement volume 1.12 Weight 5.24 kg Dimension A 270 mm Dimension B 233 mm Dimension C 105 mm Dimension D 88 mm
Ground Zero Iridium GZIW 200 8 inch Subwoofer Masori
387.81 PLN
Ground Zero Iridium GZIW 200 is an 8-inch (20 cm) Subwoofer with 150 Watts RMS and 4 Ohms. The construction includes a 3D HQPP diaphragm, a long-stroke rubber surround, and a resonance-optimized steel basket. Klippel® optimized features and a 38 mm copper voice coil are integrated. A polycot centering and an IMPP dust cap with a 3D logo are present. The efficiency is 87 dB; the recommended power is 100–200 Watts. The installation depth is 101 mm, and the maximum displacement (Xmax) is 18 mm. Resonance frequency (Fs) is 32 Hz, damping factor (Qts) is 0.44, and equivalent air volume (Vas) is 23.6 L. Features 8-inch (20 cm) Subwoofer Klippel® optimized 3D HQPP diaphragm Long-stroke rubber surround Resonance-optimized steel basket 38 mm copper voice coil Polycot centering IMPP dust cap with 3D logo Technical Specifications Type: High-Quality Subwoofer Diameter: 20 cm Power handling (RMS): 150 Watts Impedance: 4 Ohms Efficiency: 87 dB Power recommendation: 100–200 Watts Voice coil: 38 mm copper Diaphragm: 3D HQPP Max. displacement (Xmax): 18 mm Installation depth: 101 mm Resonance frequency (Fs): 32 Hz Damping factor (Qts): 0.44 Equivalent air volume (Vas): 23.6 L
Hertz HMS 10 S2-LD-SW.1 10 inch Subwoofer Masori
1541.32 PLN
The Hertz HMS 10 S2-LD-SW.1 is a 10-inch Subwoofer with an RMS power handling of 300 watts and a peak power handling of 600 watts. The diaphragm is made of polypropylene with UV inhibitors, and the impedance is 2 ohms. The device features a high-density flux ferrite magnet and a voice coil with a diameter of 50 mm. The mechanical excursion Xmech is ±16.3 mm. The Subwoofer is designed for use with an infinite baffle without a special enclosure and weighs 5.1 kg. The installation depth is 116 mm. Features 10-inch (25 cm) Subwoofer RMS power handling: 300 watts Peak power handling: 600 watts Impedance: 2 ohms Polypropylene diaphragm with UV inhibitors High-density flux ferrite magnet Removable sport grill with integrated LEDs Optimized for infinite baffle Weight: 5.1 kg Installation depth: 116 mm Technical Specifications Voice coil diameter: 50 mm Magnet size: 140 x 60 x 30 mm Xmech: ±16.3 mm Xmax: 12.3 mm Resonant frequency (Fs): 43 Hz DC resistance (Re): 2.1 ohms Inductance (Le): 0.46 mH Equivalent volume (Vas): 30.46 l Moving mass (Mms): 75.6 g Compliance (Cms): 0.18 mm/N Drive factor (BL): 8.3 T*m Total Q (Qts): 0.60 Electrical Q (Qes): 0.63 Mechanical Q (Qms): 12.3 Efficiency (Spl): 88.5 dB Outer diameter (A): 280 mm Mounting diameter (B): 227 mm Total depth (C): 164 mm Overhang (F): 48 mm Enclosure recommendation Sealed (Compact): 50 l (Vb), 54 Hz (Fb), Qtc 1.05 Enclosure recommendation Sealed (Power): 71 l (Vb), 51 Hz (Fb), Qtc 0.99
Hertz Dieci DS 25.3 10 inch Subwoofer Masori
387.74 PLN
The Hertz Dieci DS 25.3 is a 10 inch Subwoofer with a continuous power handling of 150 watts RMS and a peak power of 600 watts maximum. It is equipped with a polypropylene cone with mica additive and a butyl rubber surround. The model has a 4 Ohm impedance and a voice coil with a diameter of 38 mm. Cooling is achieved through a specific structure for heat dissipation. The enclosure design is optimized for use in compact closed enclosures or reflex enclosures. A ferrite magnet with high flux density drives the system. Features 10 inch (25 cm) Subwoofer Power: 150 watts RMS Power: 600 watts maximum Impedance: 4 Ohm Cone: Polypropylene with mica additive Surround: Butyl rubber Magnet: Ferrite with high flux density Voice coil: 38 mm diameter Enclosure suitability: Closed and reflex Dimension A: 345 mm Dimension B: 245 mm Dimension C: 79 mm Technical specifications Frequency response: 32 - 400 Hz Magnet size: 100 x 50 x 25 mm Weight: 3 kg Xmech: 16 mm Diameter D: 215 mm Xmax: 9 mm Re: 3.3 Ohm Fs: 36 Hz Le: 2.15 mH Vas: 34 liters Mms: 106 g Cms: 0.18 mm/N BL: 8.5 T*m Qts: 0.92 Qes: 1.13 Qms: 5 SPL: 89 dB
Hertz CBA250 10 inch Active Enclosure Subwoofer Masori
1926.54 PLN
The CBA 250 from Hertz is a 10-inch active enclosure subwoofer with an integrated amplifier module that produces 250 watts RMS. The system utilizes He-Li technology and achieves an efficiency of 90 percent at an impedance of 0.4 ohms. The construction is based on the 2S² design and features a diaphragm made of pressed paper as well as a 60 mm copper voice coil. The equipment includes an SSP connection block for plug and play connections, a bypassable Butterworth low-pass filter with a variable cutoff frequency of 50 to 200 Hz, and an adjustable bass boost at 45 Hz. Integration is done via high-level speaker inputs or low-level RCA inputs. Features 10-inch (25 cm) active enclosure subwoofer Power: 250 watts RMS Power: 500 watts peak Impedance: 0.4 ohms Diaphragm material: Pressed paper Voice coil material: Copper Magnet: High density flux ferrite He-Li technology with 90 percent efficiency 2S² design (2 sides / 2 sounds) SSP (Sub Smart Plug) connection block Butterworth low-pass filter: 12 dB/oct. Bass boost: 0 to 6 dB at 45 Hz Phase controller: 0 to 180 degrees Technical Specifications Size: 250 mm Voice coil diameter: 60 mm Frequency response: 20 Hz - 200 Hz Magnet size: 140 x 70 x 30 mm Xmech: 14.75 mm Length: 440 mm Width: 334 mm Height: 135 mm (158 mm with stand)