Masori.de: Glosniki samochodowe
Najlepszy
Hertz Dieci DCX 165.3 DCX 6.5 inch Coaxial Speakers Masori
275.22 PLN
The Dieci DCX 165.3 from Hertz is a 6.5 inch coaxial speaker with a continuous power handling of 60 Watts RMS and a peak value of 120 Watts. The system has an impedance of 4 Ohm and a sound pressure level of 93 dB. The frequency response ranges from 60 Hz to 21 kHz. The woofer is equipped with a high-density flux ferrite magnet and a water-repellent pressed paper membrane. For the high-frequency range, a neodymium magnet with a PEI dome is used. The construction also includes a TPU surround and a 25 mm woofer voice coil. Features 6.5 inch (16.5 cm) coaxial speaker Power: 60 Watts RMS Power: 120 Watts Max Impedance: 4 Ohm Water-repellent pressed paper membrane TPU (Thermoplastic polyurethane) surround High-density flux ferrite magnet (Woofer) Neodymium magnet (Tweeter) PEI dome Built-in crossovers Technical specifications Frequency response: 60 Hz - 21,000 Hz Sound pressure level: 93 dB Mounting depth: 72 mm Overall diameter (A): 165 mm Cutout diameter (B): 144 mm Depth (C): 72 mm Overhang (D): 64 mm Woofer voice coil: 25 mm Magnet size: 80 x 40 x 15 mm Weight per speaker: 0.77 kg Vas: 14.3 l Fs: 68 Hz Re: 3.3 Ohm Qts: 0.85 Qes: 0.96 Qms: 7.54 Mms: 11.0 g Cms: 0.49 mm/N BL: 4.0 T*m
Top Pick
Hertz Dieci DSK 165.3 6.5 inch speaker set Masori
411.62 PLN
The Dieci DSK 165.3 from Hertz is a 6.5 inch Speaker Set with a continuous power of 80 Watts and a peak power of 160 Watts. The system's impedance is 4 Ohms with a sensitivity of 93 dB SPL. The frequency response ranges from 50 Hz to 23 kHz. The woofers feature a V-Cone profile and a TPU surround. Additional features include a neodymium motor assembly and a PEI membrane for the high-frequency range. A Hi-Pass Crossover separates at 3.5 kHz with 12 dB octave. The system consists of compact woofers, tweeters, and passive filters directly at the connection cables. Features 6.5 inch (16.5 cm) Speaker Set Woofer with V-Cone Profile TPU Surround (Thermoplastic Polyurethane) Neodymium Motor Assembly PEI Membrane Power: 80 Watts RMS Power: 160 Watts Max Impedance: 4 Ohm Sensitivity: 93 dB SPL Frequency Response: 50 Hz - 23 kHz Hi-Pass Crossover: 3.5 kHz @ 12 dB octave Woofer Voice Coil: 25 mm diameter Weight Woofer: 0.74 kg Weight Tweeter: 0.03 kg Weight Crossover: 0.16 kg Technical Data D: 135 mm Re: 3.3 Ohm Fs: 67 Hz Le: 0.26 mH Vas: 14.6 l Mms: 11.3 g Cms: 0.51 mm/N BL: 4.2 T*m Qts: 0.81 Qes: 0.90 Qms: 7.59 Installation dimension A: 165 mm Installation dimension B: 144 mm Installation dimension C: 72 mm Installation dimension D: 64 mm
Doskonały
Hertz Dieci DCX 100.3 4 inch coaxial speakers Masori
232.26 PLN
The Dieci DCX 100.3 from Hertz is a 4 inch coaxial speaker with a continuous power handling of 30 W and a peak value of 60 W. The system has an impedance of 4 Ohm and an installation depth of 50 mm. A high-density ferrite magnet is used in the subwoofer, while a neodymium magnet is used in the tweeter. The membrane is made of water-repellent pressed paper and the dome is made of PEI. A TPU surround and built-in crossovers are also part of the construction. The frequency response ranges from 70 Hz to 21 kHz. Features 4 inch (10 cm) coaxial speaker Power: 30 W RMS Power: 60 W Max Impedance: 4 Ohm Water-repellent membrane made of pressed paper Neodymium magnet in the tweeter High-density ferrite magnet in the subwoofer TPU surround and PEI dome Built-in crossovers Installation depth: 50 mm Technical specifications Frequency response: 70 Hz - 21 kHz Size: 100 mm Subwoofer magnet size: 70 x 32 x 10 mm Weight of one speaker: 0.45 kg D: 85 mm Re: 3.3 Ohm Fs: 115 Hz Vas: 1.7 l Mms: 5.0 g Cms: 0.38 mm/N BL: 3.5 T*m Qts: 0.79 Qes: 0.96 Qms: 4.33 Spl: 92 dB Dimension A: 99 mm Dimension A3: 129 mm Dimension B: 94 mm Dimension C: 50 mm Dimension D: 43 mm
Polecany
Audio System MX 165 Evo 6.5 inch speaker set
428.98 PLN
The MX 165 Evo from Audio System is a 6.5 inch 2-way Speaker Set from the MX-SERIES. The design is defined as a 165 mm 2-way Efficient Compo System. The set consists of two tweeters of model HS 19 W including the crossover FWK M as well as two mid-bass drivers of type MXS 165 EVO. The impedance of the system is 3 Ohms. The power handling is specified as 2x 120 Watts maximum and 80 Watts RMS. For installation, a mounting depth of 59 mm and a mounting diameter of 143 mm are required. Features 6.5 inch (16.5 cm) Speaker Set MX-SERIES 2-way System 165 mm 2-way Efficient Compo System 2x tweeters HS 19 W with crossover FWK M 2x mid-bass drivers MXS 165 EVO Impedance: 3 Ohms Power: 120 Watts Max Power: 80 Watts RMS Mounting depth: 59 mm Mounting diameter: 143 mm
Wyróżniony
Hertz Uno K 165 6.5 inch speaker set Masori
301.04 PLN
The Hertz Uno K 165 is a 6.5 inch Speaker Set with a continuous power handling of 75 Watts RMS and a peak power of 300 Watts. The system operates with an impedance of 4 Ohms and achieves a sensitivity of 93.5 dB SPL. The frequency response covers a range from 55 Hz to 23 kHz. The technical features include an integrated Tweeter with a 24 mm diaphragm and a 14 mm voice coil. The woofer's voice coil has a diameter of 25 mm. A Crossover with a crossover type of 6 dB/octave is integrated into the Tweeter. Features 6.5 inch (16.5 cm) Speaker Set Continuous power handling: 75 Watts RMS Peak power: 300 Watts Impedance: 4 Ohms Integrated Tweeter Tweeter diaphragm: 24 mm Crossover type: 6 dB/octave Woofer weight: 0.7 kg Tweeter weight: 0.03 kg Technical Specifications Sensitivity: 93.5 dB SPL Frequency response: 55 Hz - 23,000 Hz Woofer voice coil: 25 mm diameter Tweeter voice coil: 14 mm diameter Physical specification A: 164.6 mm Physical specification B: 144 mm Physical specification C: 69 mm Physical specification D: 63 mm
Alternatywa
Hertz Dieci DCX 130.3 5 inch coaxial speakers Masori
275.06 PLN
The Hertz Dieci DCX 130.3 is a 5-inch coaxial speaker with a water-resistant membrane made of pressed paper and a TPU surround. The continuous power handling is 40 W RMS, while the peak power handling reaches 80 W. The system has an impedance of 4 Ohms and covers a frequency range of 65 Hz to 21 kHz. The woofer uses a high-density flux ferrite magnet, while the tweeter is equipped with a neodymium magnet and a PEI dome. The construction features built-in crossovers and a linear frequency response. The weight per speaker is 0.56 kg with a mounting depth of 59 mm. Features Product type: 5-inch (13 cm) coaxial speaker Continuous power handling: 40 W RMS Peak power handling: 80 W Membrane material: Water-resistant pressed paper Surround material: TPU (Thermoplastic Polyurethane) Dome material: PEI Woofer magnet: High-density flux ferrite Tweeter magnet: Neodymium Special features: Built-in crossovers Dimensions: A 130 mm, A3 151 mm, B 116 mm, C 59 mm, D 52 mm Technical Specifications Impedance: 4 Ohms Frequency response: 65 Hz - 21 kHz Sensitivity (Spl): 92 dB Woofer magnet size: 70 x 32 x 10 mm Effective diaphragm diameter (D): 112 mm DC resistance (Re): 3.3 Ohms Resonance frequency (Fs): 82 Hz Equivalent volume (Vas): 7 l Moving mass (Mms): 7.4 g Compliance (Cms): 0.51 mm/N Force factor (BL): 3.8 T*m Total Q factor (Qts): 0.76 Electrical Q factor (Qes): 0.93 Mechanical Q factor (Qms): 4.3 Weight: 0.56 kg per piece
Audio System Carbon 165 6.5 inch speaker set
344.22 PLN
The Carbon 165 from Audio System is a 6.5 inch Speaker Set from the CARBON SERIES. This 2-way Compo System consists of the mid-bass driver AC 165 and the tweeter model CARBON TW 24. For signal distribution, the cable crossover FW CARBON is integrated. The system operates with an impedance of 4 Ohms. The power consumption is specified as 2x 120 Watts maximum and 2x 80 Watts RMS. The outer diameter of the components is 165 mm with a mounting diameter of 144 mm. The mounting depth is specified as 61 mm. Features 6.5 inch (16.5 cm) Speaker Set CARBON SERIES 165 mm 2-way Compo System Tweeter: model CARBON TW 24 Mid-bass driver: model AC 165 Cable crossover: model FW CARBON Impedance: 4 Ohms Power: 2x 120 Watts Power: 2x 80 Watts Outer diameter: 165 mm Mounting diameter: 144 mm Mounting depth: 61 mm
Hertz Dieci DSK 130.3 5 inch speaker set Masori
411.55 PLN
The Dieci DSK 130.3 from Hertz is a 5-inch Speaker Set with a continuous power of 60 W and a peak value of 120 W. The system operates with an impedance of 4 Ohms and covers a frequency range of 60 Hz to 23 kHz. The woofer is equipped with a 25 mm voice coil and the exclusive V-Cone profile. TPU (Thermoplastic Polyurethane) is used as the surround material, while the high-frequency range is realized through a neodymium motor assembly and a PEI diaphragm. The sensitivity of the system is specified at 93 dB SPL. An integrated high-pass Crossover separates at 3.5 kHz with a slope of 12 dB/Oct. The passive filters are directly mounted on the connection cables to assist with the installation process. Features 5-inch (13 cm) Speaker Set Hertz Dieci Series Power: 60 W RMS Power: 120 W Peak V-Cone profile for the woofer TPU surround (Thermoplastic Polyurethane) Neodymium motor assembly for the Tweeter PEI diaphragm Crossover: High-pass at 3.5 kHz with 12 dB/Oct. Impedance: 4 Ohms Technical Specifications Sensitivity: 93 dB SPL Frequency response: 60 Hz - 23 kHz Voice coil diameter woofer: 25 mm Weight Woofer: 0.53 kg Weight Tweeter: 0.03 kg Weight Crossover: 0.16 kg Installation diameter (B): 116 mm Installation depth (C): 58 mm Total diameter (A): 130 mm Hole circle diameter (A3): 151 mm Magnet diameter (D): 52 mm Vas: 7 l Fs: 81 Hz Mms: 7.4 g Qts: 0.76
Audison Prima APK 165 Ohm2 6.5 Inch Speaker Set
684.14 PLN
Audison Prima APK 165 Ohm2 is a 6.5 inch (16.5 cm) Speaker Set. The 2-way system operates at 2 Ohms and includes the crossovers APCX WF 2Ω and APCX TW 2Ω with Cut Off @ 4.5 / 5 kHz. The power handling is 100 W continuous and 300 W peak. The woofer measures 165 mm with a 25 mm voice coil, Xmax 2.8 mm, and water-resistant treated paper cone. The tweeter is 26 mm in size with a 20 mm voice coil and acoustic lens with frequency response compensation in the range of 10–13 kHz. High-frequency level adjustment +2/0 and Hi-Contour function are integrated. The frequency response is 50–20k, the resonance frequency is 75 Hz, and the sensitivity is 95 dB. TPU edge with Triple Wave, reduced installation depth, compact basket with abrasion and scratch-resistant coating, and high-current quick-connect terminal with double contact and temperature-resistant cover are part of the equipment. Developed with the KLIPPEL Suite. Features 6.5 inch (16.5 cm) Speaker Set 2-way system Impedance 2 Ohm Peak power handling 300 W Continuous power handling 100 W Frequency response 50–20k Hz Two crossovers APCX WF 2Ω low-frequency crossover APCX TW 2Ω tweeter crossover with Hi-Contour function Cut Off @ 4.5 / 5 kHz High-frequency level adjustment +2/0 AP 1 tweeter with acoustic lens; frequency response compensation 10–13 kHz AP 6.5 2Ω woofer with water-resistant treated paper cone TPU edge with Triple Wave Reduced installation depth Compact basket with abrasion and scratch-resistant coating High-current quick-connect terminal with double contact; temperature-resistant plastic cover Passive crossover with integrated connection cable and Fast-on connectors; different connections per pole Developed with the KLIPPEL Suite Technical Specifications Woofer size 165 mm Tweeter size 26 mm Woofer cone diameter 127 mm Voice coil diameter woofer 25 mm Voice coil diameter tweeter 20 mm Magnet size woofer 85 x 32 x 15 Xmax woofer 2.8 mm Re woofer 2.1 Ohm Fs woofer 75 Hz Le woofer @ 1 kHz 0.15 mH Vas woofer 8.5 l Mms woofer 10.5 g Cms woofer 0.4 Bxl woofer 3.8 Qts woofer 0.63 Qms woofer 4.8 Spl woofer 95 dB Weight woofer 0.78 kg Weight tweeter 0.04 kg
Focal-JMlab Universal ICU100 4 inches (10 cm) speaker Shop
471.12 PLN
Universal ICU100 is a 4-inch (10 cm) coaxial speaker from Focal. The frequency response ranges from 100 Hz to 21 kHz. The sensitivity is 90.3 dB at 2.83V/1m. The nominal power handling is 40 W RMS, and the maximum power handling is 80 W. The nominal impedance is 4 Ohm. The cutout diameter is 92 mm, and the mounting depth is 49.0 mm. Features 4-inch (10 cm) coaxial speaker Cutout diameter: 92 mm Mounting depth: 49.0 mm Technical Specifications Frequency response: 100 Hz – 21 kHz Nominal impedance: 4 Ohm Sensitivity (2.83V/1m): 90.3 dB Nominal power handling: 40 W RMS Maximum power handling: 80 W
Focal-JMlab Access 165AS3 Speaker Set Buy now
1110.89 PLN
Access 165AS3 is a 6.5-inch Speaker Set from Focal. The set includes two woofers with 165 mm, two midrange drivers with 80 mm, and two tweeters with aluminum inverted dome, as well as separate Crossovers with 12 dB/octave. The nominal power is 80 watts, and the maximum power is 160 watts. The tweeter level is adjustable in three positions (-3/0/+3 dB). The sensitivity is 90 dB (2.83 V/1 m) with a frequency response of 55 Hz to 20 kHz. Additional specifications include a mounting depth of 62.9 mm, a voice coil diameter of 25 mm, a voice coil height of 15 mm, and a magnet with 85 mm. Features 6.5 inch (16.5 cm) Speaker Set Manufacturer: Focal Set contents: 2 x midrange drivers 80 mm, 2 x woofers 165 mm, 2 x tweeters, 2 x Crossovers Tweeter: aluminum inverted dome Separate Crossover: 12 dB/oct. Adjustable tweeter level: 3 positions (-3/0/+3 dB) Max. power: 160 watts Nominal power: 80 watts Technical Specifications Mounting depth: 62.9 mm Woofer diameter: 165 mm Midrange driver diameter: 80 mm Voice coil diameter: 25 mm Voice coil height: 15 mm Magnet: 85 mm Sensitivity (2.83 V/1 m): 90 dB Frequency response: 55 Hz – 20 kHz
Hertz Dieci DCX 87.3 3 inch coaxial speakers Masori
219.37 PLN
The Dieci DCX 87.3 by Hertz is a 3-inch coaxial speaker with a continuous power handling of 30 watts and a peak power of 60 watts. The system has an impedance of 4 ohms and a mounting depth of 45 mm. The woofer is equipped with a high-density flux ferrite magnet, while the tweeter uses a neodymium magnet. The diaphragm is made of water-repellent pressed paper and the dome is made of PEI material. With a frequency response of 130 to 21,000 Hz, the speaker achieves a sound pressure level of 92 dB. The construction also includes an oversized magnet group and a 20 mm woofer voice coil. Features 3-inch (8cm) coaxial speaker Power: 30 watts RMS Power: 60 watts Max Impedance: 4 ohms Diaphragm made of water-repellent pressed paper PEI dome Woofer magnet: High-density flux ferrite Tweeter magnet: Neodymium Oversized magnet group Mounting depth: 45 mm Technical Specifications Frequency response: 130 - 21,000 Hz Sound pressure level: 92 dB Woofer voice coil: 20 mm diameter Woofer magnet size: 60 x 24 x 8 mm Weight per speaker: 0.31 kg DC resistance (Re): 3.1 ohms Resonance frequency (Fs): 190 Hz Equivalent volume (Vas): 0.7 l Moving mass (Mms): 2.0 g Compliance (Cms): 0.35 mm/N Force factor (BL): 2.5 Tm Total quality factor (Qts): 1 Electrical quality factor (Qes): 1.25 Mechanical quality factor (Qms): 5.66 Overall diameter (A): 87 mm Hole circle diameter (A3): 120 mm Mounting diameter (B): 81 mm Mounting height (D): 34 mm
Audio System M 100 Evo 2 4 inch speaker set Masori
642.49 PLN
The M 100 Evo 2 from Audio System is a 4-inch Speaker Set designed as a 2-way High Efficient Compo System. The set consists of two HS 24 EVO2 Tweeters including FWK TW crossover as well as two MS 100 EVO mid-bass drivers. The components have an impedance of 3 Ohms. The maximum power is rated at 2x 110 Watts, while the nominal power is 70 Watts. For the installation of the 100 mm speakers, a mounting depth of 48 mm and a mounting diameter of 91 mm are required. Features 4 inch (10cm) Speaker Set 100 mm 2-way High Efficient Compo System 2x Tweeter model HS 24 EVO2 Crossover FWK TW for Tweeters 2x mid-bass driver model MS 100 EVO Impedance: 3 Ohms Maximum power: 2x 110 Watts Nominal power: 70 Watts Mounting depth: 48 mm Mounting diameter: 91 mm
Audison Prima APK 165 6.5 inch speaker set Masori
684.14 PLN
Prima APK 165 is a 6.5 inch (16.5 cm) Speaker Set from Audison featuring an AP 1 Tweeter and an AP 6.5 Woofer. The power handling includes 100 W continuous and 300 W peak at 4 Ohm impedance. The frequency response ranges from 60 Hz to 20 kHz. The AP 1 Tweeter has a 26 mm diaphragm diameter, a wideband surround, and an acoustic lens for the range of 10 kHz to 13 kHz. The passive high-frequency Crossover APCX TW is very compact and offers a damping switch with 0 dB or +2 dB; the separation of the Woofer occurs as HP at 3.5 kHz with 6 dB per octave. The AP 6.5 Woofer uses a 32 mm voice coil made of pure copper and a water-repellent treated paper diaphragm with FEM-calculated profile, optimized with Klippel Scan Vibrometer. Additional features include reduced installation depth, TPU edge with Triple Wave profile, compact and coated basket, motor fixed with epoxy glue, and high-current quick-connect terminals with double contact and temperature-resistant cover, complemented by quick connections to passive Crossovers with polarity-different ends. Developed with the KLIPPEL suite. Features 6.5 inch (16.5 cm) Speaker Set AP 1 Tweeter with 26 mm diaphragm diameter and wideband surround Acoustic lens on the Tweeter for the range of 10 kHz to 13 kHz AP 6.5 Woofer with 32 mm voice coil made of pure copper Water-repellent treated paper diaphragm, FEM profile, optimized with Klippel Scan Vibrometer TPU edge with Triple Wave profile Reduced installation depth Compact basket with abrasion and scratch-resistant coating Motor fixed with damping epoxy glue APCX TW passive high-frequency Crossover, very compact, damping switch 0 dB, +2 dB Crossover quick connections with polarity-different ends High-current quick-connect terminal with double contact and temperature-resistant cover Power handling continuous 100 W Power handling peak 300 W Developed with the KLIPPEL suite Technical Specifications Woofer size 165 mm Tweeter size 26 mm Voice coil diameter Woofer 32 mm Voice coil diameter Tweeter 10 mm Magnet size Woofer 85 x 40 x 15 Impedance 4 Ohm Frequency response 60 Hz to 20 kHz Crossover Woofer HP at 3.5 kHz, 6 dB/Okt Tweeter level adjustment +2 dB, 0 dB Cone diameter Woofer 129 mm Xmax Woofer 2.5 mm Re Woofer 3.1 Ohm Fs Woofer 80 Hz Le Woofer 0.23 mH at 1 kHz Vas Woofer 7.6 l Mms Woofer 12 g Cms Woofer 0.31 Bxl Woofer 4.7 Qts Woofer 0.7 Qms Woofer 4.7 SPL Woofer 93.5 dB Weight Woofer 0.78 kg Weight Tweeter 0.04 kg
Focal-JMlab Inside IS-VW-165 VW Speaker Set Buy now
630.25 PLN
Focal Inside IS-VW-165 is a VW Speaker Set with a 165 mm woofer in a vehicle-specific ABS plastic basket. The voice coil diameter is 25 mm. The sensitivity is 93.7 dB, and the nominal impedance is 2 Ohm. The frequency range extends from 60 Hz to 20 kHz. The power handling is 60 W RMS, and the maximum power is 120 W. Features VW Speaker Set 165 mm woofer with vehicle-specific ABS plastic basket 25 mm voice coil diameter Technical Specifications Sensitivity: 93.7 dB Nominal impedance: 2 Ohm Frequency range: 60 Hz – 20 kHz RMS power: 60 W Maximum power: 120 W
Focal-JMlab Access 165AS Speaker Set Buy now
680.62 PLN
Access 165AS is a 6.5 inch (16.5 cm) Speaker Set from Focal. The set includes 165AS and TN43. The 165AS is rated at 60 W nominal power, 120 W maximum power, 91 dB sensitivity, 4 Ohm nominal impedance, and 3.5 Ohm DC resistance. Features include fiberglass cone, butyl surround, 25 mm voice coil with 10 mm height, Kapton former, 2 layers of copper wire, Xmax ± 2.5 mm, as well as a magnet measuring 85 mm x 15 mm and weighing 380 g, flux density 1 T, and 5 mm air gap height. The TN43 has 15 W nominal power, 100 W maximum power, 94 dB sensitivity, 4 Ohm nominal impedance, and 3.7 Ohm DC resistance. Additional specifications for the TN43 include aluminum cone, 20 mm voice coil on Kapton former with 2 layers of copper wire, 2.5 mm air gap height, and net weight of 60 g. Features 6.5 inch (16.5 cm) Speaker Set Manufacturer: Focal Set components: 165AS and TN43 Nominal impedance 4 Ohm Nominal power 60 W (165AS) Maximum power 120 W (165AS) Sensitivity 91 dB (2.83V/1m) (165AS) Nominal power 15 W (TN43) Maximum power 100 W (TN43) Sensitivity 94 dB (2.83V/1m) (TN43) Cone fiberglass (165AS) Surround butyl (165AS) Cone aluminum (TN43) Technical Specifications DC resistance 3.5 Ohm (165AS) VC diameter 25 mm (165AS) VC height 10 mm (165AS) Voice coil former Kapton (165AS) Layers 2 (165AS) Wire copper (165AS) Xmax ± 2.5 mm (165AS) Magnet diameter x height 85 mm x 15 mm (165AS) Magnet weight 380 g (165AS) Flux density 1 T (165AS) Air gap height 5 mm (165AS) Net weight 0.85 kg (165AS) DC resistance 3.7 Ohm (TN43) VC diameter 20 mm (TN43) Voice coil former Kapton (TN43) Layers 2 (TN43) Wire copper (TN43) Air gap height 2.5 mm (TN43) Net weight 60 g (TN43)
Hertz Dieci DCX 710.3 6x9 inch Coaxial Speakers Masori
475.74 PLN
The Dieci DCX 710.3 by Hertz is a 6x9 inch coaxial speaker with a continuous power handling of 150 Watts and a peak value of 300 Watts. The system has an impedance of 4 Ohms and covers a frequency range from 40 Hz to 21 kHz. The construction includes a water-resistant membrane made of pressed paper as well as a high-density flux ferrite magnet. As a 3-way coaxial, the model uses a TPU surround, a midrange driver with a diameter of 60 mm, and a PEI dome tweeter. The mounting depth is 110 mm with a sensitivity of 93 dB. An oversized magnet group and a 25 mm woofer voice coil are also integrated. Features 6x9 inch coaxial speaker Power handling: 150 Watts RMS Power handling: 300 Watts Max Impedance: 4 Ohms Water-resistant membrane made of pressed paper High-density flux ferrite magnet for woofer and tweeter TPU surround 60 mm midrange driver and PEI dome tweeter Woofer voice coil: 25 mm diameter Weight per speaker: 1.35 kg Technical Specifications Frequency response: 40 Hz - 21 kHz Sensitivity: 93 dB Mounting depth: 110 mm Dimensions A1: 253 mm Dimensions A2: 181 mm Dimensions B1: 238 mm Dimensions B2: 167 mm Woofer magnet size: 90 x 32 x 17 mm Fs: 69 Hz Vas: 23.0 l Mms: 22.0 g Cms: 0.24 mm/N BL: 4.9 T*m Qts: 1.06 Qes: 1.31 Qms: 5.50 Re: 3.3 Ohm
Hertz UNO X 170 6.5 inch Coaxial Speakers Masori
219.51 PLN
The Uno X 170 from Hertz is a 6.5-inch coaxial speaker with a continuous power handling of 50 watts RMS and a peak power of 200 watts. The system features a 25 mm woofer voice coil driven by a high-density ferrite magnet. The diaphragm is made of water-resistant pressed paper, while PEI is used for the dome. The tweeter is equipped with a neodymium magnet and has a 24 mm diaphragm as well as a 14 mm voice coil. The speaker has an impedance of 4 ohms and is mounted in a DIN-sized basket with a wear-resistant coating. The frequency response covers the range from 60 Hz to 21 kHz. Features 6.5-inch (16.5 cm) coaxial speaker Continuous power handling: 50 watts RMS Peak power: 200 watts Diaphragm made of water-resistant pressed paper PEI dome High-density ferrite woofer magnet Neodymium tweeter magnet DIN-sized basket with wear-resistant coating Impedance: 4 ohms Technical Specifications Frequency response: 60 - 21,000 Hz Woofer voice coil: 25 mm diameter Tweeter voice coil: 14 mm diameter Tweeter diaphragm: 24 mm Woofer magnet size: 80 x 32 x 10 mm Xmech: ±3 mm Mounting diameter (B): 140 mm Mounting depth (D): 45 mm Overall diameter (A): 165 mm Overall height (C): 51 mm Weight per speaker: 0.56 kg
Glosniki samochodowe Masori.de najlepsze produkty
Hertz Mille Legend ML 700.3 3 inch midrange speaker Masori
1195.15 PLN
The Hertz Mille Legend ML 700.3 is a 3-inch (8 cm) midrange driver with 4 ohms, neodymium magnet, and a pressed cellulose membrane with cotton fibers. The exponential V-cone with optimized geometry, the single-layer voice coil, and the pole piece coated with extremely pure copper are at the center of the design. CNC-machined plates with very low carbon content, along with the Boundary Free IIR rubber surround and the CONEX spider, complete the construction. The three-spoke, resonance-damped basket made of aluminum alloy features integrated ventilation holes, along with a diamond-cut basket edge and a factory-cast aluminum grille with the Hertz logo. The frequency response ranges from 200 to 20,000 Hz, the resonance frequency is 110 Hz, and the sensitivity is 90 dB. The voice coil measures 20 mm, the magnet size is 45 x 25 x 3.5 mm, and the weight is 0.21 kg. The nominal dimensions include a size of 70 mm as well as A 87.8 mm, B 74 mm, C 47 mm, D 41.3 mm, E 93 mm, and F 17 mm. The power handling is 100 W peak, referenced to a high-pass of 250 Hz at 12 dB/octave. Features 3-inch (8 cm) midrange driver Neodymium magnet, FEA-optimized CNC-machined plates with very low carbon content Pole piece coated with extremely pure copper, single-layer voice coil Exponential V-cone with optimized geometry CONEX spider with optimized profile Boundary Free IIR rubber surround Pressed cellulose membrane with cotton fibers Optimized geometry at the cone joint (FEA) Three-spoke, resonance-damped basket made of aluminum alloy with integrated ventilation holes Diamond-cut basket edge with Hertz logo Factory-cast aluminum grille with diamond-cut Hertz logo Technical Specifications Size 70 mm Impedance 4 ohms Frequency response 200–20,000 Hz Resonance frequency Fs 110 Hz Sensitivity 90 dB Power handling peak 100 W Peak specification at high-pass 250 Hz, 12 dB/octave Voice coil Ø 20 mm Magnet size 45 x 25 x 3.5 mm Weight 0.21 kg Effective diameter 65 mm DC resistance Re 3.8 ohms Inductance Le 0.05 mH Equivalent volume Vas 1.1 l Moving mass Mms 2.7 g Compliance Cms 0.7 mm/N Force factor BL 3.3 Tm Q factor Qts 0.57 Q factor Qes 0.67 Q factor Qms 4 Dimension A 87.8 mm Dimension B 74 mm Dimension C 47 mm Dimension D 41.3 mm Dimension E 93 mm Dimension F 17 mm
Hertz Cento CK 165 6.5 inch speaker set Masori
769.49 PLN
The Cento CK 165 is a 6.5-inch (16.5 cm) Speaker Set from Hertz featuring the C 26 Tweeter with a 26 mm Tetolon diaphragm and a 20 mm voice coil, as well as the C 165 mid-bass driver with a 165 mm SPP-M semi-pressed paper diaphragm with mica. The Tweeter uses a neodymium magnet with high magnetic flux and a FEM-optimized front plate. The mid-bass driver has a 25 mm voice coil aluminum former, a flux ferrite magnet, and a compact three-spoke basket with a rubber magnet cover. The passive 2-way Crossover CCX 2 separates at 2.5 kHz with 12 dB/oct. and offers a three-position switch for the Tweeter level at 0 and +3 dB. The nominal power handling is 95 W RMS, the peak power handling is 285 W, the impedance is 4 Ohms, the sensitivity is 93 dB SPL, and the frequency response is 55 Hz to 22.5 kHz. Speaker Grilles are included. Features 6.5-inch (16.5 cm) Speaker Set Passive 2-way system with CCX 2 Crossover Tweeter C 26: 26 mm Tetolon dome, 20 mm voice coil Neodymium magnet on the Tweeter with high magnetic flux FEM-optimized Tweeter front plate Mid-bass driver C 165: 165 mm SPP-M semi-pressed paper diaphragm with mica Flux ferrite magnet on the mid-bass driver 25 mm voice coil with aluminum former on the mid-bass driver Compact three-spoke basket, acoustically combined with rubber magnet cover ABS Speaker Grille with metallic finish and protective metal grille CCX 2: Three-position switch for Tweeter level 0, +3 dB CCX 2: Capacitors with low loss factor and low-resistance inductors made of pure copper CCX 2: Compact design with metallic finish and ventilation slots Accessories for integration into OEM placements Speaker Grille included Technical Specifications Nominal power handling RMS 95 W Peak power handling 285 W Impedance 4 Ohms Sensitivity 93 dB SPL Frequency response 55 Hz – 22.5 kHz Crossover frequency 2.5 kHz @ 12 dB/oct. Crossover type Passive, 2-way Size 165 mm Tweeter diaphragm 26 mm Tweeter voice coil Ø 20 mm Mid-bass driver voice coil Ø 25 mm D 131.5 mm Re 3.2 Ohms Fs 60 Hz Le 0.2 mH Vas 13.24 l Mms 13.9 g Cms 0.51 mm/N BL 4.9 T·m Qts 0.59 Qes 0.69 Qms 3.9 Weight of mid-bass driver 0.96 Weight of Tweeter 0.03 kg Weight of Crossover 0.185 kg
Hertz Mille Legend ML 280.3 Dome Tweeter Masori
1109.9 PLN
Hertz Mille Legend ML 280.3 is a Dome Tweeter with a Tetolon dome, neodymium magnet, and FEA-optimized geometry. The voice coil measures 28 mm, the size is 35 mm, and the impedance is 4 Ohms. The frequency response ranges from 1000 to 28000 Hz, the Fs value is 900 Hz, and the sound pressure level is 92 dB. An aluminum die-cast front plate with FEA-optimized profile and a solid aluminum CNC-machined frame structure with a rear loading chamber are integrated. An extremely pure copper short-circuit ring complements the high-frequency extension. The rear acoustic chamber is designed for Fs 900 Hz and uses high-density damping material under the dome as well as low-density absorbing material in the rear chamber. The magnet size is 27.8 x 3.5 x 3 mm, the weight is 0.10 kg, and the peak power handling is 180 W. Features Dome Tweeter Tetolon dome, FEA-optimized geometry Neodymium magnet, FEA-optimized magnetic flux Extremely pure copper short-circuit ring Aluminum die-cast front plate with FEA-optimized profile Frame structure and rear loading chamber made of CNC-machined solid aluminum Rear chamber designed for Fs 900 Hz High-density damping material under the dome; low-density absorbing material in the rear chamber Size 35 mm Weight 0.10 kg Technical Specifications Impedance 4 Ohms Voice coil Ø 28 mm Frequency response 1000–28000 Hz Peak power handling 180 W Hi-pass filtering at 1.8 kHz, 12 dB/Oct. Note on peak power handling Magnet size W x D x H 27.8 x 3.5 x 3 mm Fs 900 Hz Spl 92 dB Re 3.3 Ohms Le 0.013 mH Mms 0.4 g Cms 0.09 mm/N BL 1.9 Tm Qts 1.3 Qes 1.9 Qms 4 A 53.4 mm B 48 mm C 29 mm D 13.5 mm D 28 mm
Hertz Cento CK 165 F 6.5 inch speaker set Masori
769.65 PLN
Hertz Cento CK 165 F is a 16.5 cm Speaker Set with C 26 Tweeter (26 mm Tetolon diaphragm, 20 mm voice coil) and flat CK 165 F mid-bass driver. The nominal power handling is 90 W RMS, the peak power handling is 270 W, and the impedance is 4 Ohms. The frequency response is 65–22.5 kHz with a sensitivity of 93 dB. The C 26 uses a neodymium magnet and a FEM-optimized faceplate geometry. The CK 165 F features a flat installation profile, a semi-pressed paper diaphragm with mica powder, a neodymium magnet, and low-carbon pole plates, as well as a pure copper voice coil on an aluminum former. The passive Crossover CCX 2 is ultra-compact, with high-frequency level adjustable in two steps (0, +3 dB), low-loss capacitors, pure copper coils, and ventilation slots. A metal Speaker Grille in a plastic frame is included. The crossover frequency of the filter is at 2.5 kHz with 12 dB/octave. Features 16.5 cm Speaker Set C 26 Tweeter with 26 mm Tetolon diaphragm and 20 mm voice coil Neodymium magnet on the tweeter Tweeter faceplate geometry optimized with FEM CK 165 F mid-bass driver with flat installation profile Semi-pressed paper diaphragm with mica powder Neodymium magnet and low-carbon pole plates on the mid-bass driver Pure copper voice coil on aluminum former (mid-bass driver) Ultra-compact passive Crossover CCX 2 High-frequency level adjustable: 0, +3 dB Low-loss capacitors and copper coils (crossover) Ventilation slots on the crossover Metal Speaker Grille in a plastic frame Slim basket with reduced depth Technical Specifications Size: 165 mm Power handling RMS: 90 W Power handling Peak: 270 W Impedance: 4 Ohms Sensitivity: 93 dB Frequency response: 65–22.5 kHz Crossover frequency: 2.5 kHz at 12 dB/oct. Crossover type: passive 2-way crossover Tweeter diaphragm: 26 mm Tweeter voice coil: 20 mm Mid-bass driver voice coil: 25 mm Weight of woofer: 0.72 kg Weight of tweeter: 0.03 kg Weight of crossover: 0.185 kg D: 134 mm Re: 2.7 Ohms Fs: 80 Hz Le: 0.154 mH Vas: 9.40 l Mms: 12 g Cms: 0.33 mm/N BL: 3.9 Tm Qts: 0.80 Qes: 1.00 Qms: 3.4 Spl: 93 dB
Hertz Mille Legend MLK 1650.3 6.5 Inch Speaker Set
3410.24 PLN
Hertz Mille Legend MLK 1650.3 is a 6.5 inch (16.5 cm) Speaker Set as a 2-way system with a passive Crossover. The MLCX 2 TW.3 Crossover enables a bi-amping system and offers a contour controller for the woofer and tweeter crossover frequency. The Crossover cut-off points are at 2.5 kHz (Mid/Hi-Cont. ON) and 3.5 kHz (Mid/Hi-Cont. OFF). It is specified with 150 W RMS and 300 W peak power, as well as 4 Ohm impedance. The frequency response is rated at 40 - 25,000 Hz, with a sensitivity of 92 dB SPL. The woofer has a 36 mm voice coil, the tweeter has a 28 mm voice coil and a 35 mm tweeter diaphragm. Weights: Woofer 1.29 kg, Tweeter 0.10 kg, Crossover 0.57 kg. Features 6.5 inch (16.5 cm) Speaker Set 2-way system with passive Crossover MLCX 2 TW.3 Bi-amping feasible (dual amplifier system) Contour controller for woofer and tweeter crossover frequency RMS power 150 W Peak power 300 W Impedance 4 Ohm Sensitivity 92 dB SPL Frequency response 40 - 25,000 Hz Crossover cut-off 2.5 kHz (Mid/Hi-Cont. ON), 3.5 kHz (Mid/Hi-Cont. OFF) Tweeter diaphragm 35 mm Tweeter voice coil 28 mm Woofer voice coil 36 mm Technical Specifications Size 165 mm Crossover type 2-way passive crossover Weight Woofer 1.29 kg Weight Tweeter 0.10 kg Weight Crossover 0.57 kg D 132 mm Re 3.3 Ohm Fs 65 Hz Le 0.24 mH Vas 8.3 l Mms 17.5 g Cms 0.3 mm/N BL 7 T*m Qts 0.47 Qes 0.52 Qms 5.3 Spl 93 dB
Hertz Cento CX 130 5 Inch Coaxial Speakers Masori
402.67 PLN
Hertz Cento CX 130 is a 5 inch (13 cm) coaxial speaker with a 2-way design and 130 mm nominal size. Equipped with a 24 mm soft Tetolon tweeter with ferrofluid cooling and RHFC Rotary High Frequency Contour for alignment. The tweeter front plate is optimized through FEM simulation. The woofer uses a 25 mm voice coil on an aluminum carrier and a 130 mm SPP-M membrane made of semi-pressed paper with mica. A high-density ferrite magnet with low-carbon pole plates and a compact 3-spoke basket with rubber magnet protection are integrated. Nominal load capacity 50 W RMS, peak load capacity 150 W, impedance 4 Ohm. Frequency response 65–22,000 Hz, weight per speaker 0.73 kg, Xmech 3.8 mm, tweeter with neodymium magnet. Features 5 inch (13 cm) coaxial speaker 2-way coaxial system 24 mm Soft Tetolon Tweeter, ferrofluid-cooled RHFC Rotary High Frequency Contour Tweeter, adjustable FEM-optimized Tweeter Faceplate 25 mm voice coil on the woofer on aluminum carrier 130 mm SPP-M membrane made of semi-pressed paper with mica High-density ferrite magnet with low-carbon pole plates on the woofer Neodymium Tweeter Magnet Compact 3-spoke basket with rubber magnet protection Speaker Grille made of ABS with metallic finish and metal grille Technical Data Size: 130 mm RMS Power: 50 W Peak Power: 150 W Impedance: 4 Ohm Woofer Voice Coil: 25 mm Ø Tweeter Voice Coil: 13 mm Ø Frequency Response: 65–22,000 Hz Tweeter Magnet Size B x H: 13 x 2 mm Weight per Speaker: 0.73 kg Xmech: 3.8 mm Effective Diameter D: 110 mm Re: 3.1 Ohm Fs: 80 Hz Le: 0.18 mH Vas: 13.5 l Mms: 7.6 g Cms: 0.50 mm/N BL: 4.2 T·m Qts: 0.56 Qes: 0.67 Qms: 3.5 Sound Pressure: 92.5 dB Dimension A: 130 mm Dimension B: 119 mm Dimension C: 65.5 mm Dimension D: 156 mm Dimension E: 156 mm Dimension F: 21 mm
Hertz Cento CK 165 L 6.5 inch speaker set Masori
769.46 PLN
The Hertz Cento CK 165 L is a 6.5-inch (16.5 cm) Speaker Set with a passive 2-way crossover. It includes the C 26 Tweeter with a 26 mm Tetolon diaphragm and a 20 mm voice coil, as well as the CK 165 L mid-bass driver with a non-pressed paper diaphragm, a 25 mm voice coil on an aluminum carrier, and a neodymium magnet with low-carbon pole plates. The CCX 2T and CCX 2W crossovers are separate and ultra-compact, and the high-frequency level is adjustable in three steps. Performance data: 100 W RMS, 300 W Peak, 4 Ohm impedance, sensitivity of the Tweeter 92 dB and the mid-bass driver 91 dB, frequency response 50 to 22.5 kHz. The filters operate at 3.8 kHz with 6 dB/Oct (LP) and 12 dB/Oct (HP). Additional features include FEM-optimized faceplate geometry, a compact 3-spoke chassis with rubber protection for the magnet, and a metal Speaker Grille in a plastic frame. Features 6.5-inch (16.5 cm) Speaker Set RMS power 100 W Peak power 300 W Impedance 4 Ohm Frequency response 50–22.5 kHz Sensitivity of Tweeter 92 dB SPL Sensitivity of mid-bass driver 91 dB SPL C 26 Tweeter with 26 mm Tetolon diaphragm Tweeter voice coil 20 mm Neodymium magnet on the Tweeter FEM-optimized faceplate geometry Installation accessories CK 165 L mid-bass driver with non-pressed paper diaphragm Mid-bass driver voice coil 25 mm on aluminum carrier Neodymium magnet with low-carbon pole plates on the mid-bass driver Compact 3-spoke basket, rubber protection for the magnet Metal Speaker Grille with plastic frame Separate, ultra-compact crossovers CCX 2T and CCX 2W High-frequency level adjustable in three steps (-2, 0, +2 dB) Low-loss components, pure copper coils Passive 2-way crossover design Technical Specifications Crossover filter: LP 6 dB/Oct at 3.8 kHz, HP 12 dB/Oct at 3.8 kHz Tweeter diaphragm 26 mm Tweeter voice coil Ø 20 mm Mid-bass driver voice coil Ø 25 mm D 131.5 mm Re 3.2 Ohm Fs 60 Hz Le 0.23 mH Vas 13.66 l Mms 14.2 g Cms 0.52 mm/N BL 4.9 Tm Qts 0.60 Qes 0.70 Qms 3.8 SPL 91 dB Weight of Tweeter 0.037 kg Weight of crossover 0.037 kg
Hertz Dieci DSK 170.3 6.5 inch speaker set Masori
411.62 PLN
The Dieci DSK 170.3 by Hertz is a 6.5-inch Speaker Set with a continuous power of 80 Watts and a peak power of 160 Watts. The woofers utilize the exclusive V-Cone profile and a TPU surround made of thermoplastic polyurethane to reduce resonances. The system features a neodymium motor assembly, a PEI diaphragm for the high-frequency range, and a 25 mm voice coil in the woofer. The impedance is 4 Ohms with a sensitivity of 93 dB SPL. The package includes passive filters as high-pass Crossover, which are integrated directly into the connection cables. The technical components are designed for a mounting opening of 140 mm and a mounting depth of 50 mm. Features 6.5-inch (16.5 cm) Speaker Set Power: 80 Watts RMS Power: 160 Watts Max Impedance: 4 Ohms V-Cone profile TPU surround (Thermoplastic Polyurethane) Neodymium motor assembly PEI diaphragm for Tweeter High-pass Crossover 25 mm woofer voice coil Technical Specifications Frequency response: 50 Hz - 23,000 Hz Sensitivity: 93 dB SPL Cut-off frequency: 3.5 kHz at 12 dB Oct. Mounting diameter: 140 mm Mounting depth: 50 mm Total diameter: 165 mm Woofer weight: 0.53 kg Tweeter weight: 0.03 kg Crossover weight: 0.16 kg Fs: 79 Hz Vas: 11.3 l Mms: 10 g Qts: 0.96
Hertz Dieci DCX 160.3 6.5 inch Coaxial Speakers Masori
274.83 PLN
The Dieci DCX 160.3 from Hertz are 6.5-inch coaxial speakers with a continuous power handling of 60 watts and a peak power handling of 120 watts. The system has an impedance of 4 ohms and covers a frequency range of 50 to 21,000 Hz. The diaphragm material is water-repellent pressed paper, combined with a TPU surround and a PEI dome tweeter. The tweeter is equipped with a neodymium magnet, while the woofer uses a high-density flux ferrite magnet. An integrated crossover is part of the design. The delivery includes an adapter ring for installation in GM and Honda models. Features 6.5-inch (16.5 cm) coaxial speakers Continuous power handling: 60 watts Peak power handling: 120 watts Impedance: 4 ohms Diaphragm: Water-repellent pressed paper Tweeter: PEI dome with neodymium magnet Surround: TPU (thermoplastic polyurethane) Woofer magnet: High-density flux ferrite Integrated crossover Includes adapter ring for GM and Honda Technical Specifications Frequency response: 50 - 21,000 Hz Size: 160 mm Mounting depth: 66.5 mm Woofer voice coil: 25 mm diameter Woofer magnet size: 80 x 40 x 15 mm Weight per speaker: 0.75 kg Sensitivity: 93 dB Resonance frequency (Fs): 70 Hz DC resistance (Re): 3.2 ohms Equivalent volume (Vas): 10.32 l Moving mass (Mms): 10 g Compliance (Cms): 0.52 mm/N Force factor (BL): 4.50 T*m Total Q factor (Qts): 0.62 Electrical Q factor (Qes): 0.69 Mechanical Q factor (Qms): 6.3 Dimension A: 167 mm Dimension B: 127 mm Dimension C: 66.5 mm Dimension D: 56.5 mm
Hertz Dieci DSK 160.3 6.5 inch speaker set Masori
411.62 PLN
The Dieci DSK 160.3 from Hertz is a 6.5 inch Speaker Set with a continuous power of 80 Watts and a peak power of 160 Watts. The system operates with an impedance of 4 Ohms and covers a frequency range of 50 to 23,000 Hz. The sensitivity is specified at 93 dB SPL. The technical components include a 25 mm voice coil for the woofer as well as a Hi Pass Crossover. The woofers weigh 0.73 kg, while the tweeters weigh 0.03 kg and the crossovers weigh 0.16 kg. The dimensions of the components are specified with an outer diameter of 167 mm and a mounting depth of 56.5 mm. Features 6.5 inch (16.5 cm) Speaker Set Power: 80 Watts RMS Power: 160 Watts Peak Impedance: 4 Ohms 25 mm Woofer Voice Coil Hi Pass Crossover Type Woofer Weight: 0.73 kg Tweeter Weight: 0.03 kg Crossover Weight: 0.16 kg Outer Diameter (A): 167 mm Mounting Diameter (B): 127 mm Total Height (C): 66.5 mm Mounting Depth (D): 56.5 mm Technical Specifications Sensitivity: 93 dB SPL Frequency Response: 50 - 23,000 Hz Effective Diaphragm Diameter (D): 124 mm DC Resistance (Re): 3.2 Ohms Resonance Frequency (Fs): 70 Hz Inductance (Le): 0.18 mH Equivalent Volume (Vas): 10.28 l Moving Mass (Mms): 10 g Compliance (Cms): 0.50 mm/N Drive Factor (BL): 4.5 T*m Total Quality (Qts): 0.62 Electrical Quality (Qes): 0.69 Mechanical Quality (Qms): 6.3
Hertz Cento C 26 Dome Tweeter Masori
258.17 PLN
The Hertz Cento C 26 is a Dome Tweeter with a 26 mm Tetolon diaphragm and a 20 mm voice coil. A Neodymium magnet and an optimized faceplate geometry are integrated. Designed with a linear characteristic. The impedance is 4 Ohm and the peak power handling is 120 W. The frequency response ranges from 1.8 kHz to 22.5 kHz, and the sensitivity is 92 dB. The free air resonance is at 1500 Hz, and the DC resistance is 3.7 Ohm. The weight is 0.04 kg. Accessories for installation in original mounting locations are included. Features Dome Tweeter 26 mm Tetolon diaphragm 20 mm voice coil Impedance 4 Ohm Neodymium magnet Optimized faceplate geometry Linear characteristic Peak power 120 W Frequency response 1.8 kHz – 22.5 kHz Sensitivity 92 dB Accessories for installation in original mounting locations Weight 0.04 kg Technical specifications Size 26 mm Voice coil Ø 20 mm Re 3.7 Ohm Fs 1500 Hz Le 0.02 mH Mms 0.17 g Cms 0.07 mm/N BL 1.3 T*m Qts 1.6 Qes 3.5 Qms 2.9 Magnet Neodymium Magnet size (W x D x H) 19 x 0 x 3 mm A 44 mm B 38.5 mm C 20 mm D 9.1 mm Note: High-pass filtered @ 2.5 kHz – 12 dB/Oct.
Hertz Mille Pro MPX 165.3 6.5 Inch Coaxial Speaker
769.52 PLN
The Hertz Mille Pro MPX 165.3 is a 6.5-inch (165 mm) coaxial speaker with a concentric, coaxial tweeter. The nominal power handling is 100 W, with a peak power handling of 200 W at 4 Ohms. The frequency response ranges from 45 Hz to 21.5 kHz. The woofer uses a 36 mm copper voice coil on a polyamide former and a high-density flux ferrite magnet, while the tweeter has a 20 mm voice coil with a neodymium magnet. The diaphragm is made of pressed cellulose with cotton fibers and is complemented by a Boundary Free rubber surround. The acoustically transparent basket is made of an aluminum alloy with a diamond cut. Xmech is ±6 mm. The weight per speaker is 1.27 kg. Features 6.5-inch (165 mm) coaxial speaker Concentric, coaxial tweeter Tweeter support as a rear chamber, designed for low Fs 36 mm pure copper voice coil on the woofer on a polyamide former 20 mm tweeter voice coil Diaphragm made of pressed cellulose with cotton fibers Boundary Free rubber surround Oversized ferrite magnet with iron plates with very low carbon content Acoustically transparent basket made of aluminum alloy with diamond cut and Hertz logo made of aluminum Anti-vibration rubber magnet cover Shallow mounting depth Technical Specifications Nominal power handling 100 W RMS Peak power handling 200 W Impedance 4 Ohms Frequency response 45 Hz – 21.5 kHz Speaker size 165 mm Diameter of woofer voice coil 36 mm Diameter of tweeter voice coil 20 mm Size of bass magnet 90 x 45 x 17 mm Size of tweeter magnet 29.5 x 22 x 4 mm Weight per speaker 1.27 kg Xmech ±6 mm Physical dimensions A 165 mm, B 141 mm, C 74 mm, D 62.6 mm, E 183.5 mm, F 29 mm Effective diaphragm diameter D 132 mm Re 3.1 Ohms Fs 90 Hz Le 0.01 mH Vas 4 l Mms 18.9 g Cms 0.15 mm/N BL 5.8 T·m Qts 0.88 Qes 1.06 Qms 5.5 SPL 92 dB Bass magnet high-density flux ferrite Tweeter neodymium magnet
Hertz Cento Pro CPX 165 6.5 Inch Coaxial Speaker
599.1 PLN
Hertz Cento Pro CPX 165 is a 6.5 inch (16.5 cm) coaxial speaker with 95 W RMS and 285 W peak at 4 Ohm. The frequency response is 45–22000 Hz. The tweeter uses a 26 mm Tetolon diaphragm with a Neodymium magnet and a 20 mm voice coil. The woofer features a diaphragm made of pressed paper, a Butyl surround, and a 25 mm voice coil. The woofer magnet is made of high-density flux ferrite. Xmech is ±6.9 mm. It includes ventilation technology. The weight per speaker is 1.13 kg. Features 6.5 inch (16.5 cm) coaxial speaker RMS power 95 W Peak power 285 W Impedance 4 Ohm Frequency response 45–22000 Hz Tweeter Tetolon diaphragm 26 mm Tweeter magnet Neodymium Woofer magnet flux ferrite with high density Diaphragm made of pressed paper Surround Butyl Ventilation technology Xmech ±6.9 mm Weight per speaker 1.13 kg Technical specifications Woofer voice coil Ø 25 mm Tweeter voice coil Ø 20 mm Woofer magnet size 85 x 32 x 17 mm (W x D x H) Tweeter magnet size 19 x 3 mm (W x H) D 131.5 mm Re 3.3 Ohm Fs 60 Hz Le 0.29 mH Vas 11.8 l Mms 14.6 g Cms 0.47 mm/N BL 5.3 T*m Qts 0.55 Qes 0.64 Qms 4.1 Sound pressure level 92 dB Dimension A 165 mm Dimension B 141 mm Dimension C 84.5 mm Dimension D 65.5 mm Dimension E 171 mm Dimension F 24 mm
Hertz HMX 8-TW 8 inch coaxial speaker Masori
1195.52 PLN
HMX 8-TW is an 8-inch (20 cm) coaxial speaker from Hertz with 4 Ohm, 100 W RMS, and 200 W Peak. The frequency response ranges from 45 to 25000 Hz, and the sound pressure level is 91 dB. The tweeter uses neodymium and a PEI dome, is optimized for off-axis radiation, and features a 36 mm tweeter diaphragm along with a 20 mm tweeter voice coil. The woofer has a 32 mm voice coil, a high-density ferrite magnet, and a polypropylene diaphragm with UV inhibitors, along with a molded Santoprene surround. It includes an aramid fiber spider with silicone-insulated connection wires, a sealed built-in crossover with a resettable solid-state tweeter protection circuit, and gold-plated corrosion-resistant terminals. The assembly is FEM-optimized for high excursion and features a massive magnetic group in a marine-grade injected polymer basket; Xmech is ±8.5 mm. The depth is 123 mm, and the weight per speaker is 1.66 kg; magnetic assembly dimensions and other measurements are specified. Designed and tested for UV, salt mist, vibrations, splash water, temperature shock, and dust. Features 8-inch (20 cm) coaxial speaker Marine-grade, designed and tested for UV, salt mist, vibrations, splash water, temperature shock, and dust Neodymium tweeter 36 mm with PEI dome Front plate and acoustic lens, optimized for off-axis radiation Stainless steel tweeter grille Polypropylene diaphragm with UV inhibitors Molded Santoprene surround Aramid fiber spider with silicone-insulated connection wires FEM-optimized high-excursion assembly, massive magnetic group Injected polymer basket in marine-grade Sealed built-in crossover with resettable solid-state tweeter protection circuit Gold-plated, corrosion-resistant terminals Technical Specifications Size 200 mm Impedance 4 Ohm Power handling RMS 100 W Power handling Peak 200 W Depth 123 mm Tweeter diaphragm 36 mm Woofer voice coil Ø 32 mm Tweeter voice coil Ø 20 mm Frequency response 45 - 25000 Hz Woofer magnet size B x T x H 90 x 40 x 20 mm Tweeter magnet size B x H 19.7 x 3 mm Weight per speaker 1.66 kg Woofer magnet ferrite with high density Tweeter magnet neodymium Xmech ±8.5 mm D 174 mm Re 3.1 Ohm Fs 50 Hz Le 0.52 mH Vas 29.46 l Mms 27.3 g Cms 0.37 mm/N Bl 6.6 T m Qts 0.58 Qes 0.61 Qms 11 Spl 91 dB Dimension A 225 mm Dimension B 180 mm Dimension C 123 mm Dimension D 91 mm Dimension F 32 mm
Hertz Mille Pro MPK 130.3 5 inch speaker set Masori
1110.13 PLN
Hertz Mille Pro MPK 130.3 is a 5-inch (13 cm) Speaker Set with a 130 mm nominal size, V-cone, and Boundary Free Surround. The set includes the woofer MP 130.3 and the Tweeter MP 25.3, as well as the passive 2-way Crossover MPCX 2.3 with a crossover frequency of 3.5 kHz. The electrical impedance is 4 Ohms, the sensitivity is 91 dB SPL, and the frequency response is 60 – 22.5 kHz. The Tweeter diaphragm measures 29 mm, and the voice coils of the woofer and Tweeter are each 25 mm. The power handling is 100 W RMS and 200 W Peak. The weight is 0.95 kg (woofer), 0.07 kg (Tweeter), and 0.16 kg (Crossover). Other parameters: D 110 mm, Re 3.1 Ohm, Fs 90 Hz, Le 0.25 mH, Vas 3 liters, Mms 10.5 g, Cms 0.24 mm/N, BL 5.3 Tm, Qts 0.64, Qes 0.74, Qms 5.1, SPL 92 dB; Tweeter level adjustable. Features 5-inch (13 cm) Speaker Set Speaker size 130 mm Technologies V-cone and Boundary Free Surround Woofer MP 130.3 Tweeter MP 25.3 Passive 2-way Crossover MPCX 2.3 Crossover frequency 3.5 kHz Impedance 4 Ohms Sensitivity 91 dB SPL Frequency response 60 – 22.5 kHz Tweeter diaphragm 29 mm Woofer voice coil Ø 25 mm Tweeter voice coil Ø 25 mm Tweeter level adjustable Power handling RMS 100 W Power handling Peak 200 W Weight woofer 0.95 kg Weight Tweeter 0.07 kg Weight Crossover 0.16 kg Technical Specifications Effective diameter D 110 mm Re 3.1 Ohm Fs 90 Hz Le 0.25 mH Vas 3 liters Mms 10.5 g Cms 0.24 mm/N BL 5.3 Tm Qts 0.64 Qes 0.74 Qms 5.1 SPL 92 dB
Hertz Mille Pro MP 25.3 Dome Tweeter Masori
428.54 PLN
Mille Pro MP 25.3 is a Dome Tweeter from Hertz with a Tetolon dome and a 25 mm ferrofluid-cooled voice coil. It features Center Tuning Duct Geometry, a neodymium magnet, and a rear chamber with damping material. The front plate is FEM-optimized, size 29 mm, weight 0.07 kg. Frequency response is 1.4 kHz to 22.5 kHz, impedance 4 Ohm. Peak power handling is 120 W, high-pass filtered at 2.5 kHz with 12 dB/oct. Electroacoustic specifications: Re 3.9 Ohm, Fs 1200 Hz, Le 0.02 mH, Mms 0.17 g, Cms 0.1 mm/N, BL 1.6 T*m, Qts 0.55, Qes 1.98, Qms 0.57, sound pressure 91 dB. Magnet size is 24.5 x 6 x 3.5 mm. Physical dimensions A 44 mm, B 41 mm, C 27 mm, D 17 mm. Features Dome Tweeter Tetolon dome 25 mm ferrofluid-cooled voice coil Neodymium magnet Center Tuning Duct Geometry Rear chamber with damping material Front plate FEM-optimized Size 29 mm Dimensions A 44 mm, B 41 mm, C 27 mm, D 17 mm Wide range of installation accessories Technical Data Impedance 4 Ohm Frequency response 1.4 kHz to 22.5 kHz Peak power handling 120 W Reference for peak power handling: High-pass 2.5 kHz, 12 dB/oct Voice coil diameter 25 mm Magnet size 24.5 x 6 x 3.5 mm Weight 0.07 kg Re 3.9 Ohm Fs 1200 Hz Le 0.02 mH Mms 0.17 g Cms 0.1 mm/N BL 1.6 T*m Qts 0.55 Qes 1.98 Qms 0.57 Sound pressure 91 dB
Hertz UNO X 690 6x9 inch Coaxial Speakers Masori
304.81 PLN
The Hertz Uno X 690 is a 6x9 inch coaxial speaker with a continuous power handling capacity of 85 W RMS and a peak power handling of 340 W. The system features an impedance of 4 Ohms and a water-resistant pressed paper membrane for the woofer. A dual 15 mm piezo super tweeter with a PEI dome extends the frequency response up to 22 kHz. The construction includes a ferrite woofer magnet with high flux density and a ferrite tweeter magnet. The weight per speaker is 0.93 kg. The woofer voice coil has a diameter of 25 mm, while the tweeter voice coil measures 20 mm. Features 6x9 inch coaxial speaker Power: 85 W RMS Power: 340 W Max Impedance: 4 Ohms Water-resistant pressed paper membrane PEI dome Ferrite woofer magnet with high flux density Ferrite tweeter magnet Xmech: ±4.3 mm Technical Specifications Frequency response: 45 - 22,000 Hz Tweeter membrane: 40 mm Woofer voice coil diameter: 25 mm Tweeter voice coil diameter: 20 mm Woofer magnet size: 80 x 40 x 15 mm Weight per piece: 0.93 kg Dimension A: 237.3 mm Dimension B: 224 mm Dimension C: 91 mm Dimension D: 75 mm Dimension E: 162.2 mm Dimension F: 154 mm Dimension G: 264 mm Dimension H: 192 mm Dimension I: 28.5 mm
Hertz SPL Show ST 25K Neo.2 Horn Tweeter Masori
811.78 PLN
The Hertz SPL Show ST 25K Neo.2 is a Horn Tweeter with Neodymium N38 H in the motor unit, FEM-optimized phase plug, and loaded horn. Size 44 mm, impedance 4 Ohm, and power handling 100 W Peak with high-pass filtering at 5 kHz with 12 dB/Oct. The voice coil with a diameter of 25 mm uses CCAR technology, and the dome is made of aluminum. The frequency response ranges from 3000 to 20000 Hz, the sensitivity level is 107 dB, the resonance frequency is 3900 Hz; Re is 2.9 Ohm, Le 0.03 mH, and Bl 2.05 T*m. The weight is 0.39 kg. The kit version includes a metal grille and an inline crossover filter. Waterproofing and anti-UV treatment are included. Physical dimensions: A 57 mm, B 43.5 mm, C 55.5 mm, D 29.7 mm. Features Horn Tweeter Neodymium Magnet N38 H FEM-optimized phase plug Loaded horn CCAR voice coil Aluminum dome Waterproofing and anti-UV treatment Kit version including metal grille and inline crossover filter Size 44 mm Impedance 4 Ohm Voice coil Ø 25 mm Power handling Peak 100 W High-pass filtering 5 kHz, 12 dB/Oct. Weight 0.39 kg Technical Specifications Frequency response 3000–20000 Hz Re 2.9 Ohm Fs 3900 Hz Le 0.03 mH Bl 2.05 T*m Sensitivity 107 dB D 35.5 mm Dimensions A 57 mm, B 43.5 mm, C 55.5 mm, D 29.7 mm
Hertz SPL Show SV 165 Neo 6.5 Inch Midbass Speaker
939.72 PLN
The SPL Show SV 165 Neo is a 6.5 inch (16.5 cm) mid-bass speaker from Hertz with Neodymium Magnet N38 H and lightweight design. The cones are splash water and UV-resistant, and the diaphragm is made of water-repellent pressed paper. Motor units are cataphoretically treated, connection wires are insulated and oxidation-treated. Connections and mounting holes are compatible for installation on Harley-Davidson motorcycles. Nominal impedance is 4 Ohm, RMS power is 150 W, and peak power is 400 W. The frequency response ranges from 100 to 10,000 Hz, and the voice coil has Ø 38.6 mm. Features 6.5 inch (16.5 cm) mid-bass speaker Manufacturer: Hertz RMS Power: 150 W Peak Power: 400 W Impedance: 4 Ohm Neodymium Magnet N38 H Splash water and UV-resistant cones Diaphragm: water-repellent pressed paper Cataphoretically treated motor units Insulated, oxidation-treated connection wires Connections and mounting holes compatible with Harley-Davidson motorcycles Weight: 0.9 kg Technical Specifications Size: 165 mm Voice Coil: Ø 38.6 mm Frequency Response: 100–10,000 Hz Magnet Size (W x D x H): 70 x 45 x 7 mm Magnet: Neodymium Effective Diameter (D): 128 mm Re: 3.2 Ohm Fs: 110 Hz Le: 0.06 mH Vas: 3.55 l Mms: 14.7 g Cms: 0.15 mm/N BL: 6.5 T·m Qts: 0.58 Qes: 0.62 Qms: 8.7 Sound Pressure Level (SPL): 97 dB A: 167.2 mm B: 143.3 mm C: 65.2 mm D: 57.1 mm
Hertz Mille Pro MP 70.3 3 Inch Midrange Speaker Masori
598.79 PLN
Hertz Mille Pro MP 70.3 is a 3-inch (8 cm) midrange speaker with a size of 70 mm and an impedance of 4 Ohms. The design features a symmetrical dual neodymium magnet structure and a 20 mm CCAW dual-layer voice coil on a polyamide former with 8 decompression holes. The V-cone profile with an exponential V-membrane made of pressed cellulose with cotton fibers is geometrically optimized. Boundary Free Surround is integrated. The frequency response ranges from 180–18,000 Hz, sensitivity is 88 dB, Fs is 110 Hz, BL is 2.8 T*m, Le is 0.12 mH, and Re is 3.7 Ohms. The acoustically transparent basket is made of aluminum alloy with a diamond cut and an aluminum Hertz logo, a vibration-damping rubber magnet cover is removable, and a full-protection metal grille with a mineral powder-coated inner grill is included. Peak power handling is 100 W. Weight is 0.17 kg. Features 3-inch midrange speaker (8 cm) Symmetrical dual neodymium magnet structure (FEM-developed) 20 mm CCAW dual-layer voice coil on polyamide former with 8 decompression holes Exponential V-membrane profile/V-cone made of pressed cellulose with cotton fibers Boundary Free Surround Acoustically transparent basket made of aluminum alloy with diamond cut and aluminum Hertz logo Vibration-damping rubber magnet cover, removable Full-protection metal grille with aluminum Hertz logo, mineral powder-coated inner grill Neodymium magnet Weight 0.17 kg Technical Specifications Size: 70 mm Impedance: 4 Ohms Frequency response: 180–18,000 Hz Sensitivity: 88 dB Peak power handling: 100 W Power handling note: High-pass filter @ 250 Hz – 12 dB/Oct. Voice coil diameter: 20 mm Re: 3.7 Ohms Fs: 110 Hz Le: 0.12 mH BL: 2.8 T*m Mms: 2.9 g Cms: 0.7 mm/N Qts: 0.82 Qes: 1 Qms: 4.6 Magnet size (W x T x H): 19.7 x 0 x 2 mm Vas: 1 Physical dimensions: A 87.8 mm; B 73 mm; C 50 mm; D 44 mm; E 93 mm; F 17 mm D: 65 mm Membrane: Pressed cellulose cone with cotton fibers
Hertz Dieci DCX 170.3 6.5 inch coaxial speakers Masori
275.32 PLN
The Dieci DCX 170.3 from Hertz is a 6.5-inch coaxial speaker with an outer diameter of 170 mm and a mounting depth of 51 mm. The system features a water-resistant pressed paper diaphragm, a TPU surround, and a copper voice coil on a Conex carrier. The continuous power handling is rated at 50 W, while the peak power handling is 100 W. The impedance is specified at 4 Ohms, and the frequency response ranges from 60 Hz to 21 kHz. The woofer is equipped with a high-density flux ferrite magnet, while the tweeter uses a neodymium magnet. The speaker also has a PEI dome and built-in crossovers. Features 6.5-inch coaxial speaker Continuous power handling: 50 W Peak power handling: 100 W Impedance: 4 Ohms Water-resistant pressed paper diaphragm TPU surround Copper voice coil on Conex carrier Woofer magnet: High-density flux ferrite Tweeter magnet: Neodymium PEI dome Built-in crossovers Weight per speaker: 0.56 kg Technical Specifications Frequency response: 60 Hz - 21 kHz Woofer voice coil diameter: 25 mm Woofer magnet size: 80 x 32 x 10 mm Sensitivity (Spl): 93 dB DC resistance (Re): 3.6 Ohms Resonance frequency (Fs): 85 Hz Equivalent volume (Vas): 11.3 l Moving mass (Mms): 8.8 g Compliance (Cms): 0.4 mm/N Force factor (BL): 3.7 T*m Total Q factor (Qts): 0.95 Electrical Q factor (Qes): 1.21 Mechanical Q factor (Qms): 4.39 Dimension A: 165 mm Dimension B: 140 mm Dimension C: 51 mm Dimension D: 45 mm
Hertz Cento Pro CPK 165 6.5 Inch Speaker Set
939.86 PLN
The Cento Pro CPK 165 is a 6.5 inch (16.5 cm) Speaker Set from Hertz featuring the CP 165 Woofer and CP 25 Tweeter. The system utilizes Center Tuning Duct technology. The power handling is 105 W RMS and 315 W Peak at 4 Ohm impedance. The frequency response is 45–22.5 kHz with a sensitivity of 92.5 dB. The passive 2-way crossover separates at 2.8 kHz with 12 dB/Oct. The tweeter has a 29 mm diaphragm and a 25 mm voice coil, while the woofer has a 25 mm voice coil. Additional specifications: Fs 60 Hz, Re 3.3 Ohm, Le 0.3 mH, Vas 11.5 l, Mms 15.4 g, Cms 0.44 mm/N, BL 5.45 T*m, Qts 0.57, Qes 0.66, Qms 4.3, effective diameter D 131.5 mm, weights 1.07 kg (Woofer), 0.07 kg (Tweeter), 0.2 kg (Crossover). Features 6.5 inch (16.5 cm) Speaker Set CP 165 Woofer and CP 25 Tweeter Center Tuning Duct technology Impedance 4 Ohm RMS power 105 W Peak power 315 W Sensitivity 92.5 dB Frequency response 45–22.5 kHz Passive 2-way crossover Crossover frequency 2.8 kHz at 12 dB/Oct Tweeter diaphragm 29 mm Woofer voice coil Ø 25 mm Tweeter voice coil Ø 25 mm Size 165 mm Technical Data Effective diameter D 131.5 mm Re 3.3 Ohm Fs 60 Hz Le 0.3 mH Vas 11.5 l Mms 15.4 g Cms 0.44 mm/N BL 5.45 T*m Qts 0.57 Qes 0.66 Qms 4.3 Weight Woofer 1.07 kg Weight Tweeter 0.07 kg Weight Crossover 0.2 kg