Hertz Dieci DCX 100.3 4 inch coaxial speakers Masori
231.71 PLN
Sprawdź pełną kartę z dokładnymi informacjami, porównaj ceny i odkryj funkcje dla PRODUKTNAME, dostępnego w cenie PRICEMONET; wpisuje się w kategorię CATEGORYNAME; sprzedaż prowadzona przez SELLERNAME, a produkcja przez PRODUCERNAME.
The Dieci DCX 100.3 from Hertz is a 4 inch coaxial speaker with a continuous power handling of 30 W and a peak value of 60 W. The system has an impedance of 4 Ohm and an installation depth of 50 mm. A high-density ferrite magnet is used in the subwoofer, while a neodymium magnet is used in the tweeter. The membrane is made of water-repellent pressed paper and the dome is made of PEI. A TPU surround and built-in crossovers are also part of the construction. The frequency response ranges from 70 Hz to 21 kHz. Features 4 inch (10 cm) coaxial speaker Power: 30 W RMS Power: 60 W Max Impedance: 4 Ohm Water-repellent membrane made of pressed paper Neodymium magnet in the tweeter High-density ferrite magnet in the subwoofer TPU surround and PEI dome Built-in crossovers Installation depth: 50 mm Technical specifications Frequency response: 70 Hz - 21 kHz Size: 100 mm Subwoofer magnet size: 70 x 32 x 10 mm Weight of one speaker: 0.45 kg D: 85 mm Re: 3.3 Ohm Fs: 115 Hz Vas: 1.7 l Mms: 5.0 g Cms: 0.38 mm/N BL: 3.5 T*m Qts: 0.79 Qes: 0.96 Qms: 4.33 Spl: 92 dB Dimension A: 99 mm Dimension A3: 129 mm Dimension B: 94 mm Dimension C: 50 mm Dimension D: 43 mm
EAN: 8018823104166
Koszt dostawy: 6.9 PLN
Dostępność: in stock
Czas dostawy: 1-3 dni robocze
Stan: new
The Dieci DCX 100.3 from Hertz is a 4 inch coaxial speaker with a continuous power handling of 30 W and a peak value of 60 W. The system has an impedance of 4 Ohm and an installation depth of 50 mm. A high-density ferrite magnet is used in the subwoofer, while a neodymium magnet is used in the tweeter. The membrane is made of water-repellent pressed paper and the dome is made of PEI. A TPU surround and built-in crossovers are also part of the construction. The frequency response ranges from 70 Hz to 21 kHz. Features 4 inch (10 cm) coaxial speaker Power: 30 W RMS Power: 60 W Max Impedance: 4 Ohm Water-repellent membrane made of pressed paper Neodymium magnet in the tweeter High-density ferrite magnet in the subwoofer TPU surround and PEI dome Built-in crossovers Installation depth: 50 mm Technical specifications Frequency response: 70 Hz - 21 kHz Size: 100 mm Subwoofer magnet size: 70 x 32 x 10 mm Weight of one speaker: 0.45 kg D: 85 mm Re: 3.3 Ohm Fs: 115 Hz Vas: 1.7 l Mms: 5.0 g Cms: 0.38 mm/N BL: 3.5 T*m Qts: 0.79 Qes: 0.96 Qms: 4.33 Spl: 92 dB Dimension A: 99 mm Dimension A3: 129 mm Dimension B: 94 mm Dimension C: 50 mm Dimension D: 43 mm
EAN: 8018823104166
Koszt dostawy: 6.9 PLN
Dostępność: in stock
Czas dostawy: 1-3 dni robocze
Stan: new
Porównanie podobnych produktów
Hertz Dieci DCX 165.3 DCX 6.5 inch Coaxial Speakers Masori
274.57 PLN
The Dieci DCX 165.3 from Hertz is a 6.5 inch coaxial speaker with a continuous power handling of 60 Watts RMS and a peak value of 120 Watts. The system has an impedance of 4 Ohm and a sound pressure level of 93 dB. The frequency response ranges from 60 Hz to 21 kHz. The woofer is equipped with a high-density flux ferrite magnet and a water-repellent pressed paper membrane. For the high-frequency range, a neodymium magnet with a PEI dome is used. The construction also includes a TPU surround and a 25 mm woofer voice coil. Features 6.5 inch (16.5 cm) coaxial speaker Power: 60 Watts RMS Power: 120 Watts Max Impedance: 4 Ohm Water-repellent pressed paper membrane TPU (Thermoplastic polyurethane) surround High-density flux ferrite magnet (Woofer) Neodymium magnet (Tweeter) PEI dome Built-in crossovers Technical specifications Frequency response: 60 Hz - 21,000 Hz Sound pressure level: 93 dB Mounting depth: 72 mm Overall diameter (A): 165 mm Cutout diameter (B): 144 mm Depth (C): 72 mm Overhang (D): 64 mm Woofer voice coil: 25 mm Magnet size: 80 x 40 x 15 mm Weight per speaker: 0.77 kg Vas: 14.3 l Fs: 68 Hz Re: 3.3 Ohm Qts: 0.85 Qes: 0.96 Qms: 7.54 Mms: 11.0 g Cms: 0.49 mm/N BL: 4.0 T*m
Hertz Dieci DCX 130.3 5 inch coaxial speakers Masori
274.41 PLN
The Hertz Dieci DCX 130.3 is a 5-inch coaxial speaker with a water-resistant membrane made of pressed paper and a TPU surround. The continuous power handling is 40 W RMS, while the peak power handling reaches 80 W. The system has an impedance of 4 Ohms and covers a frequency range of 65 Hz to 21 kHz. The woofer uses a high-density flux ferrite magnet, while the tweeter is equipped with a neodymium magnet and a PEI dome. The construction features built-in crossovers and a linear frequency response. The weight per speaker is 0.56 kg with a mounting depth of 59 mm. Features Product type: 5-inch (13 cm) coaxial speaker Continuous power handling: 40 W RMS Peak power handling: 80 W Membrane material: Water-resistant pressed paper Surround material: TPU (Thermoplastic Polyurethane) Dome material: PEI Woofer magnet: High-density flux ferrite Tweeter magnet: Neodymium Special features: Built-in crossovers Dimensions: A 130 mm, A3 151 mm, B 116 mm, C 59 mm, D 52 mm Technical Specifications Impedance: 4 Ohms Frequency response: 65 Hz - 21 kHz Sensitivity (Spl): 92 dB Woofer magnet size: 70 x 32 x 10 mm Effective diaphragm diameter (D): 112 mm DC resistance (Re): 3.3 Ohms Resonance frequency (Fs): 82 Hz Equivalent volume (Vas): 7 l Moving mass (Mms): 7.4 g Compliance (Cms): 0.51 mm/N Force factor (BL): 3.8 T*m Total Q factor (Qts): 0.76 Electrical Q factor (Qes): 0.93 Mechanical Q factor (Qms): 4.3 Weight: 0.56 kg per piece
Hertz Dieci DCX 87.3 3 inch coaxial speakers Masori
218.86 PLN
The Dieci DCX 87.3 by Hertz is a 3-inch coaxial speaker with a continuous power handling of 30 watts and a peak power of 60 watts. The system has an impedance of 4 ohms and a mounting depth of 45 mm. The woofer is equipped with a high-density flux ferrite magnet, while the tweeter uses a neodymium magnet. The diaphragm is made of water-repellent pressed paper and the dome is made of PEI material. With a frequency response of 130 to 21,000 Hz, the speaker achieves a sound pressure level of 92 dB. The construction also includes an oversized magnet group and a 20 mm woofer voice coil. Features 3-inch (8cm) coaxial speaker Power: 30 watts RMS Power: 60 watts Max Impedance: 4 ohms Diaphragm made of water-repellent pressed paper PEI dome Woofer magnet: High-density flux ferrite Tweeter magnet: Neodymium Oversized magnet group Mounting depth: 45 mm Technical Specifications Frequency response: 130 - 21,000 Hz Sound pressure level: 92 dB Woofer voice coil: 20 mm diameter Woofer magnet size: 60 x 24 x 8 mm Weight per speaker: 0.31 kg DC resistance (Re): 3.1 ohms Resonance frequency (Fs): 190 Hz Equivalent volume (Vas): 0.7 l Moving mass (Mms): 2.0 g Compliance (Cms): 0.35 mm/N Force factor (BL): 2.5 Tm Total quality factor (Qts): 1 Electrical quality factor (Qes): 1.25 Mechanical quality factor (Qms): 5.66 Overall diameter (A): 87 mm Hole circle diameter (A3): 120 mm Mounting diameter (B): 81 mm Mounting height (D): 34 mm
Hertz Dieci DCX 710.3 6x9 inch Coaxial Speakers Masori
474.6 PLN
The Dieci DCX 710.3 by Hertz is a 6x9 inch coaxial speaker with a continuous power handling of 150 Watts and a peak value of 300 Watts. The system has an impedance of 4 Ohms and covers a frequency range from 40 Hz to 21 kHz. The construction includes a water-resistant membrane made of pressed paper as well as a high-density flux ferrite magnet. As a 3-way coaxial, the model uses a TPU surround, a midrange driver with a diameter of 60 mm, and a PEI dome tweeter. The mounting depth is 110 mm with a sensitivity of 93 dB. An oversized magnet group and a 25 mm woofer voice coil are also integrated. Features 6x9 inch coaxial speaker Power handling: 150 Watts RMS Power handling: 300 Watts Max Impedance: 4 Ohms Water-resistant membrane made of pressed paper High-density flux ferrite magnet for woofer and tweeter TPU surround 60 mm midrange driver and PEI dome tweeter Woofer voice coil: 25 mm diameter Weight per speaker: 1.35 kg Technical Specifications Frequency response: 40 Hz - 21 kHz Sensitivity: 93 dB Mounting depth: 110 mm Dimensions A1: 253 mm Dimensions A2: 181 mm Dimensions B1: 238 mm Dimensions B2: 167 mm Woofer magnet size: 90 x 32 x 17 mm Fs: 69 Hz Vas: 23.0 l Mms: 22.0 g Cms: 0.24 mm/N BL: 4.9 T*m Qts: 1.06 Qes: 1.31 Qms: 5.50 Re: 3.3 Ohm
Hertz Dieci DCX 160.3 6.5 inch Coaxial Speakers Masori
274.18 PLN
The Dieci DCX 160.3 from Hertz are 6.5-inch coaxial speakers with a continuous power handling of 60 watts and a peak power handling of 120 watts. The system has an impedance of 4 ohms and covers a frequency range of 50 to 21,000 Hz. The diaphragm material is water-repellent pressed paper, combined with a TPU surround and a PEI dome tweeter. The tweeter is equipped with a neodymium magnet, while the woofer uses a high-density flux ferrite magnet. An integrated crossover is part of the design. The delivery includes an adapter ring for installation in GM and Honda models. Features 6.5-inch (16.5 cm) coaxial speakers Continuous power handling: 60 watts Peak power handling: 120 watts Impedance: 4 ohms Diaphragm: Water-repellent pressed paper Tweeter: PEI dome with neodymium magnet Surround: TPU (thermoplastic polyurethane) Woofer magnet: High-density flux ferrite Integrated crossover Includes adapter ring for GM and Honda Technical Specifications Frequency response: 50 - 21,000 Hz Size: 160 mm Mounting depth: 66.5 mm Woofer voice coil: 25 mm diameter Woofer magnet size: 80 x 40 x 15 mm Weight per speaker: 0.75 kg Sensitivity: 93 dB Resonance frequency (Fs): 70 Hz DC resistance (Re): 3.2 ohms Equivalent volume (Vas): 10.32 l Moving mass (Mms): 10 g Compliance (Cms): 0.52 mm/N Force factor (BL): 4.50 T*m Total Q factor (Qts): 0.62 Electrical Q factor (Qes): 0.69 Mechanical Q factor (Qms): 6.3 Dimension A: 167 mm Dimension B: 127 mm Dimension C: 66.5 mm Dimension D: 56.5 mm
Hertz Dieci DCX 170.3 6.5 inch coaxial speakers Masori
274.67 PLN
The Dieci DCX 170.3 from Hertz is a 6.5-inch coaxial speaker with an outer diameter of 170 mm and a mounting depth of 51 mm. The system features a water-resistant pressed paper diaphragm, a TPU surround, and a copper voice coil on a Conex carrier. The continuous power handling is rated at 50 W, while the peak power handling is 100 W. The impedance is specified at 4 Ohms, and the frequency response ranges from 60 Hz to 21 kHz. The woofer is equipped with a high-density flux ferrite magnet, while the tweeter uses a neodymium magnet. The speaker also has a PEI dome and built-in crossovers. Features 6.5-inch coaxial speaker Continuous power handling: 50 W Peak power handling: 100 W Impedance: 4 Ohms Water-resistant pressed paper diaphragm TPU surround Copper voice coil on Conex carrier Woofer magnet: High-density flux ferrite Tweeter magnet: Neodymium PEI dome Built-in crossovers Weight per speaker: 0.56 kg Technical Specifications Frequency response: 60 Hz - 21 kHz Woofer voice coil diameter: 25 mm Woofer magnet size: 80 x 32 x 10 mm Sensitivity (Spl): 93 dB DC resistance (Re): 3.6 Ohms Resonance frequency (Fs): 85 Hz Equivalent volume (Vas): 11.3 l Moving mass (Mms): 8.8 g Compliance (Cms): 0.4 mm/N Force factor (BL): 3.7 T*m Total Q factor (Qts): 0.95 Electrical Q factor (Qes): 1.21 Mechanical Q factor (Qms): 4.39 Dimension A: 165 mm Dimension B: 140 mm Dimension C: 51 mm Dimension D: 45 mm
Hertz Dieci DCX 690.3 6x9 inch Coaxial Speakers Masori
410.83 PLN
The Dieci DCX 690.3 from Hertz is a 6x9 inch coaxial speaker designed as an authentic 3-way system. The continuous power handling is 90 Watts RMS, while the peak power handling is 180 Watts. The system has an impedance of 4 Ohm and covers a frequency response from 45 Hz to 21 kHz. Technical features include a high-density flux ferrite magnet for the woofer and tweeter, as well as a TPU surround. A midrange driver with a diameter of 60 mm and a PEI dome tweeter are also integrated. The installation depth is 98 mm with a weight of 0.95 kg per speaker. \\Features\\ \ \Product type: 6x9 inch coaxial speaker\ \3-way system\ \Continuous power handling: 90 Watts\ \Peak power handling: 180 Watts\ \Impedance: 4 Ohm\ \Woofer voice coil: 25 mm diameter\ \Midrange driver: 60 mm diameter\ \Tweeter: PEI dome\ \Magnet material: High-density flux ferrite\ \Surround: TPU thermoplastic polyurethane\ \Weight per speaker: 0.95 kg\ \ \\Technical specifications\\ \ \Frequency response: 45 - 21000 Hz\ \Installation depth: 98 mm\ \Dimension A1: 237 mm\ \Dimension A2: 162 mm\ \Dimension B1: 224 mm\ \Dimension B2: 153 mm\ \Woofer magnet size: 80 x 40 x 15 mm\ \Re: 3.4 Ohm\ \Fs: 66 Hz\ \Vas: 25.7 l\ \Mms: 16.5 g\ \Cms: 0.35 mm/N\ \BL: 3.9 T\*m\ \Qts: 1.12\ \Qes: 1.55\ \Qms: 4.06\ \
Hertz Dieci DCX 570.3 5x7 inch Coaxial Speakers Masori
317.32 PLN
The Dieci DCX 570.3 by Hertz is a 5x7 inch coaxial speaker with a continuous power rating of 60 W and a peak power of 120 W. The system has an impedance of 4 Ohms and a frequency response of 60 Hz to 21 kHz. The woofer is equipped with a high-density flux ferrite magnet, while the tweeter uses a neodymium magnet. The diaphragm is made of water-resistant, pressed paper, and the surround is made of TPU. The copper voice coil with a diameter of 25 mm is wound on a Conex former. The speaker also features PEI dome tweeters and integrated crossovers. With a mounting depth of 66 mm and a weight of 0.76 kg, the structure is designed for compact integration. Features 5x7 inch coaxial speaker Continuous power: 60 W Peak power: 120 W Impedance: 4 Ohms Diaphragm material: Water-resistant pressed paper Tweeter magnet material: Neodymium Woofer magnet material: High-density flux ferrite Surround material: TPU (Thermoplastic Polyurethane) Dome material: PEI Mounting depth: 66 mm Weight per speaker: 0.76 kg Technical Specifications Size: 127 x 177 mm Frequency response: 60 - 21,000 Hz Voice coil diameter woofer: 25 mm Magnet size woofer: 80 x 40 x 15 mm Dimension A1: 220 mm Dimension A2: 141 mm Dimension B1: 182 mm Dimension B2: 127 mm Dimension D: 59 mm DC resistance (Re): 3.3 Ohms Resonance frequency (Fs): 81 Hz Equivalent volume (Vas): 10.7 l Moving mass (Mms): 10.8 g Compliance (Cms): 0.36 mm/N Drive factor (BL): 4.3 T*m Total Q (Qts): 0.82 Electrical Q (Qes): 1.00 Mechanical Q (Qms): 4.56 Sensitivity (Spl): 93 dB
Hertz Dieci DSK 165.3 6.5 inch speaker set Masori
410.64 PLN
The Dieci DSK 165.3 from Hertz is a 6.5 inch Speaker Set with a continuous power of 80 Watts and a peak power of 160 Watts. The system's impedance is 4 Ohms with a sensitivity of 93 dB SPL. The frequency response ranges from 50 Hz to 23 kHz. The woofers feature a V-Cone profile and a TPU surround. Additional features include a neodymium motor assembly and a PEI membrane for the high-frequency range. A Hi-Pass Crossover separates at 3.5 kHz with 12 dB octave. The system consists of compact woofers, tweeters, and passive filters directly at the connection cables. Features 6.5 inch (16.5 cm) Speaker Set Woofer with V-Cone Profile TPU Surround (Thermoplastic Polyurethane) Neodymium Motor Assembly PEI Membrane Power: 80 Watts RMS Power: 160 Watts Max Impedance: 4 Ohm Sensitivity: 93 dB SPL Frequency Response: 50 Hz - 23 kHz Hi-Pass Crossover: 3.5 kHz @ 12 dB octave Woofer Voice Coil: 25 mm diameter Weight Woofer: 0.74 kg Weight Tweeter: 0.03 kg Weight Crossover: 0.16 kg Technical Data D: 135 mm Re: 3.3 Ohm Fs: 67 Hz Le: 0.26 mH Vas: 14.6 l Mms: 11.3 g Cms: 0.51 mm/N BL: 4.2 T*m Qts: 0.81 Qes: 0.90 Qms: 7.59 Installation dimension A: 165 mm Installation dimension B: 144 mm Installation dimension C: 72 mm Installation dimension D: 64 mm
Hertz Dieci DCX 460.3 4 inch x 6" coaxial speakers Masori
274.74 PLN
The Hertz Dieci DCX 460.3 is a 4 inch x 6 inch coaxial speaker with a continuous power handling of 40 watts and a peak power handling of 80 watts. The system has an impedance of 4 ohms and covers a frequency range of 65 Hz to 21 kHz. The construction includes a woofer with a high-density flux ferrite magnet and a water-resistant diaphragm made of pressed paper. A high-quality neodymium tweeter with a PEI dome ensures the reproduction of high frequencies. The sound pressure level is 93 dB. The mounting depth is 53 mm. Features 4 inch x 6 inch coaxial speaker Power: 40 watts RMS Power: 80 watts Max Impedance: 4 ohms Water-resistant diaphragm made of pressed paper Woofer magnet: High-density flux ferrite Tweeter magnet: Neodymium Tweeter dome: PEI TPU (Thermoplastic Polyurethane) surround Copper voice coil on Conex carrier Technical Specifications Frequency response: 65 Hz - 21 kHz Sound pressure level: 93 dB Mounting depth: 53 mm Woofer voice coil: 25 mm Weight per piece: 0.58 kg Dimension A1: 155 mm Dimension A2: 97 mm Dimension B1: 146 mm Dimension B2: 89 mm Total height C: 53 mm Installation height D: 45 mm Fs: 90 Hz Vas: 6.2 l Re: 3.3 ohms Qts: 0.79
Hertz UNO X 165 6.5 inch Coaxial Speakers Masori
219 PLN
The Hertz Uno X 165 is a 6.5 inch coaxial speaker with a continuous power handling of 55 watts and a peak power handling of 220 watts. The technical construction includes a 25 mm woofer voice coil and a ferrite magnet with high flux density. The tweeter is equipped with a neodymium magnet and a PEI dome. The diaphragm is made of water-resistant pressed paper, and the DIN basket features a wear-resistant coating. The system covers a frequency range of 60 Hz to 21 kHz with an impedance of 4 ohms. A weight of 0.73 kg per speaker and an Xmech of plus/minus 3.5 mm are part of the physical specifications. Features 6.5 inch (16.5 cm) coaxial speaker Water-resistant pressed paper diaphragm PEI tweeter dome Ferrite woofer magnet with high flux density Neodymium tweeter magnet Wear-resistant coating of the DIN basket Power handling: 55 watts RMS Power handling: 220 watts peak Impedance: 4 ohms Technical Specifications Frequency response: 60 - 21,000 Hz Woofer voice coil: 25 mm diameter Tweeter voice coil: 14 mm diameter Tweeter diaphragm: 24 mm Woofer magnet size: 80 x 40 x 15 mm Tweeter magnet size: 13 x 1.5 mm Overall diameter (A): 164.6 mm Mounting diameter (B): 144 mm Overall depth (C): 69 mm Mounting depth (D): 63 mm Weight per speaker: 0.73 kg Xmech: ±3.5 mm
Hertz Cento CX 100 4 inch coaxial speakers Masori
342.57 PLN
Hertz Cento CX 100 is a 4-inch (10 cm) coaxial speaker. It features an SPP-M diaphragm made of semi-pressed paper and mica, along with a 25 mm voice coil on the aluminum frame of the mid-bass driver. The 24 mm Soft Tetolon tweeter is ferrofluid-cooled; RHFC (Rotary High Frequency Contour) and a tweeter faceplate optimized by FEM are integrated. The mid-bass driver magnet is made of high-density flux ferrite with low-carbon pole plates, while the tweeter magnet is made of neodymium. Xmech 2.9 mm, weight per speaker 0.47 kg. Dimensions A 102.5 mm, B 93 mm, C 57.5 mm, D 43.5 mm. Electroacoustic specifications: D 86.5 mm, Re 3.1 Ohm, Le 0.18 mH, Vas 2 l, Mms 5.1 g, Cms 0.41 mm/N, BL 3.3 Tm, Qts 0.81, Qes 1.00, Qms 4.1, SPL 92 dB, frequency response 80 to 22000 Hz. Features 4-inch (10 cm) coaxial speaker Size 100 mm SPP-M diaphragm (semi-pressed paper + mica) 24 mm Soft Tetolon tweeter, ferrofluid-cooled RHFC (Rotary High Frequency Contour) for off-axis operation alignment Tweeter faceplate optimized by FEM simulation 25 mm voice coil (mid-bass driver) with aluminum frame Mid-bass driver magnet high-density flux ferrite, low-carbon pole plates Tweeter magnet neodymium Compact 3-spoke basket with rubber magnet protection Speaker grille made of ABS with metallic finish and metal mesh Dimensions A 102.5 mm, B 93 mm, C 57.5 mm, D 43.5 mm Weight per speaker 0.47 kg Technical Specifications RMS power handling 40 W Peak power handling 120 W Impedance 4 Ohm Frequency response 80 - 22000 Hz Mid-bass driver voice coil Ø 25 mm Tweeter voice coil Ø 13 mm Mid-bass driver magnet size 70 x 32 x 10 mm (W x D x H) Tweeter magnet size 13 x 2 mm (W x H) D 86.5 mm Re 3.1 Ohm Fs 100 Hz Le 0.18 mH Vas 2 l Mms 5.1 g Cms 0.41 mm/N BL 3.3 Tm Qts 0.81 Qes 1.00 Qms 4.1 SPL 92 dB Xmech 2.9 mm
Hertz Dieci DBX 25.3 10 inch Enclosure Subwoofer Masori
641.44 PLN
The Dieci DBX 25.3 from Hertz is a 10-inch Enclosed Subwoofer with a continuous power handling of 150 watts and a peak power of 600 watts. The system features a SUB BOX design without a filter component and operates with an impedance of 4 ohms. The enclosure is made from thick MDF panels and includes a rear slanted plate to reduce wave reflections. The integrated DS subwoofer unit is equipped with a 38 mm voice coil. The frequency response of the system ranges from 32 to 400 Hz with a maximum mechanical excursion of 9 mm. With dimensions of 443 mm in width, 227 mm in depth, and 298 mm in height, the enclosure is compactly designed. Features 10-inch (25 cm) Enclosed Subwoofer Material: Thick MDF enclosure Rear slanted plate for reflection reduction DS subwoofer unit SUB BOX design without filter component Continuous power handling: 150 watts Peak power handling: 600 watts Impedance: 4 ohms Technical Specifications Voice coil diameter: 38 mm Frequency response: 32 - 400 Hz Xmech: 9 mm Width (A): 443 mm Depth (B): 227 mm Height (C): 298 mm
Hertz Dieci DSK 130.3 5 inch speaker set Masori
410.57 PLN
The Dieci DSK 130.3 from Hertz is a 5-inch Speaker Set with a continuous power of 60 W and a peak value of 120 W. The system operates with an impedance of 4 Ohms and covers a frequency range of 60 Hz to 23 kHz. The woofer is equipped with a 25 mm voice coil and the exclusive V-Cone profile. TPU (Thermoplastic Polyurethane) is used as the surround material, while the high-frequency range is realized through a neodymium motor assembly and a PEI diaphragm. The sensitivity of the system is specified at 93 dB SPL. An integrated high-pass Crossover separates at 3.5 kHz with a slope of 12 dB/Oct. The passive filters are directly mounted on the connection cables to assist with the installation process. Features 5-inch (13 cm) Speaker Set Hertz Dieci Series Power: 60 W RMS Power: 120 W Peak V-Cone profile for the woofer TPU surround (Thermoplastic Polyurethane) Neodymium motor assembly for the Tweeter PEI diaphragm Crossover: High-pass at 3.5 kHz with 12 dB/Oct. Impedance: 4 Ohms Technical Specifications Sensitivity: 93 dB SPL Frequency response: 60 Hz - 23 kHz Voice coil diameter woofer: 25 mm Weight Woofer: 0.53 kg Weight Tweeter: 0.03 kg Weight Crossover: 0.16 kg Installation diameter (B): 116 mm Installation depth (C): 58 mm Total diameter (A): 130 mm Hole circle diameter (A3): 151 mm Magnet diameter (D): 52 mm Vas: 7 l Fs: 81 Hz Mms: 7.4 g Qts: 0.76
Hertz UNO X 690 6x9 inch Coaxial Speakers Masori
304.09 PLN
The Hertz Uno X 690 is a 6x9 inch coaxial speaker with a continuous power handling capacity of 85 W RMS and a peak power handling of 340 W. The system features an impedance of 4 Ohms and a water-resistant pressed paper membrane for the woofer. A dual 15 mm piezo super tweeter with a PEI dome extends the frequency response up to 22 kHz. The construction includes a ferrite woofer magnet with high flux density and a ferrite tweeter magnet. The weight per speaker is 0.93 kg. The woofer voice coil has a diameter of 25 mm, while the tweeter voice coil measures 20 mm. Features 6x9 inch coaxial speaker Power: 85 W RMS Power: 340 W Max Impedance: 4 Ohms Water-resistant pressed paper membrane PEI dome Ferrite woofer magnet with high flux density Ferrite tweeter magnet Xmech: ±4.3 mm Technical Specifications Frequency response: 45 - 22,000 Hz Tweeter membrane: 40 mm Woofer voice coil diameter: 25 mm Tweeter voice coil diameter: 20 mm Woofer magnet size: 80 x 40 x 15 mm Weight per piece: 0.93 kg Dimension A: 237.3 mm Dimension B: 224 mm Dimension C: 91 mm Dimension D: 75 mm Dimension E: 162.2 mm Dimension F: 154 mm Dimension G: 264 mm Dimension H: 192 mm Dimension I: 28.5 mm
Hertz UNO X 170 6.5 inch Coaxial Speakers Masori
219 PLN
The Uno X 170 from Hertz is a 6.5-inch coaxial speaker with a continuous power handling of 50 watts RMS and a peak power of 200 watts. The system features a 25 mm woofer voice coil driven by a high-density ferrite magnet. The diaphragm is made of water-resistant pressed paper, while PEI is used for the dome. The tweeter is equipped with a neodymium magnet and has a 24 mm diaphragm as well as a 14 mm voice coil. The speaker has an impedance of 4 ohms and is mounted in a DIN-sized basket with a wear-resistant coating. The frequency response covers the range from 60 Hz to 21 kHz. Features 6.5-inch (16.5 cm) coaxial speaker Continuous power handling: 50 watts RMS Peak power: 200 watts Diaphragm made of water-resistant pressed paper PEI dome High-density ferrite woofer magnet Neodymium tweeter magnet DIN-sized basket with wear-resistant coating Impedance: 4 ohms Technical Specifications Frequency response: 60 - 21,000 Hz Woofer voice coil: 25 mm diameter Tweeter voice coil: 14 mm diameter Tweeter diaphragm: 24 mm Woofer magnet size: 80 x 32 x 10 mm Xmech: ±3 mm Mounting diameter (B): 140 mm Mounting depth (D): 45 mm Overall diameter (A): 165 mm Overall height (C): 51 mm Weight per speaker: 0.56 kg
Hertz Cento CX 130 5 Inch Coaxial Speakers Masori
401.71 PLN
Hertz Cento CX 130 is a 5 inch (13 cm) coaxial speaker with a 2-way design and 130 mm nominal size. Equipped with a 24 mm soft Tetolon tweeter with ferrofluid cooling and RHFC Rotary High Frequency Contour for alignment. The tweeter front plate is optimized through FEM simulation. The woofer uses a 25 mm voice coil on an aluminum carrier and a 130 mm SPP-M membrane made of semi-pressed paper with mica. A high-density ferrite magnet with low-carbon pole plates and a compact 3-spoke basket with rubber magnet protection are integrated. Nominal load capacity 50 W RMS, peak load capacity 150 W, impedance 4 Ohm. Frequency response 65–22,000 Hz, weight per speaker 0.73 kg, Xmech 3.8 mm, tweeter with neodymium magnet. Features 5 inch (13 cm) coaxial speaker 2-way coaxial system 24 mm Soft Tetolon Tweeter, ferrofluid-cooled RHFC Rotary High Frequency Contour Tweeter, adjustable FEM-optimized Tweeter Faceplate 25 mm voice coil on the woofer on aluminum carrier 130 mm SPP-M membrane made of semi-pressed paper with mica High-density ferrite magnet with low-carbon pole plates on the woofer Neodymium Tweeter Magnet Compact 3-spoke basket with rubber magnet protection Speaker Grille made of ABS with metallic finish and metal grille Technical Data Size: 130 mm RMS Power: 50 W Peak Power: 150 W Impedance: 4 Ohm Woofer Voice Coil: 25 mm Ø Tweeter Voice Coil: 13 mm Ø Frequency Response: 65–22,000 Hz Tweeter Magnet Size B x H: 13 x 2 mm Weight per Speaker: 0.73 kg Xmech: 3.8 mm Effective Diameter D: 110 mm Re: 3.1 Ohm Fs: 80 Hz Le: 0.18 mH Vas: 13.5 l Mms: 7.6 g Cms: 0.50 mm/N BL: 4.2 T·m Qts: 0.56 Qes: 0.67 Qms: 3.5 Sound Pressure: 92.5 dB Dimension A: 130 mm Dimension B: 119 mm Dimension C: 65.5 mm Dimension D: 156 mm Dimension E: 156 mm Dimension F: 21 mm
Hertz Cento CX 570 5x7 inch Coaxial Speakers Masori
428.01 PLN
Hertz Cento CX 570 is a 5 x 7 inch coaxial Speaker Grille with 70 W RMS, 210 W Peak, and 4 Ohm impedance. The 24 mm soft Tetolon Tweeter with ferrofluid cooling works in combination with RHFC for rotatable high-frequency orientation as well as an adjustable high-frequency system. The geometry of the Tweeter faceplate is optimized using FEM for a linear frequency response even in off-axis operation. The mid-bass driver uses a 25 mm voice coil on an aluminum carrier and a simply pressed SPP-M diaphragm made of semi-pressed paper with mica. The bass driver magnet is made of high-density flux ferrite, while the tweeter magnet is made of neodymium; a compact 4-spoke basket with rubber magnet protection and an ABS Speaker Grille with metallic finish and metal mesh are integrated. Technical specifications include a frequency response of 55 to 22,000 Hz, Xmech 4.9 mm, and a weight of 1.0 kg per speaker. Electroacoustic parameters: Re 3.3 Ohm, Fs 70 Hz, Le 0.2 mH, Vas 11.1 l, Mms 13 g, Cms 0.34 mm/N, BL 4.9 Tm, Qts 0.67, Qes 0.83, Qms 3.3, sound pressure 93.5 dB. Dimensions: bass driver magnet 85 x 32 x 15 mm, tweeter magnet 13 x 2 mm, effective diameter 139 mm, A 221 mm, B 182 mm, C 75 mm, D 65.5 mm. Features 5 x 7 inch coaxial Speaker Grille RMS power 70 W Peak power 210 W Impedance 4 Ohm Frequency response 55 to 22,000 Hz 24 mm soft Tetolon Tweeter with ferrofluid cooling RHFC rotatable Tweeter for off-axis orientation Adjustable high-frequency system FEM-optimized Tweeter faceplate geometry 25 mm voice coil on aluminum carrier SPP-M diaphragm, semi-pressed paper with mica Bass driver magnet high-density flux ferrite, low-carbon pole plates Tweeter magnet neodymium Compact 4-spoke basket with rubber magnet protection Speaker Grille made of ABS with metallic finish and metal mesh Weight 1.0 kg per speaker Technical Data Bass driver magnet size 85 x 32 x 15 mm Tweeter magnet size 13 x 2 mm Effective diameter 139 mm Xmech 4.9 mm Re 3.3 Ohm Fs 70 Hz Le 0.2 mH Vas 11.1 l Mms 13 g Cms 0.34 mm/N BL 4.9 Tm Qts 0.67 Qes 0.83 Qms 3.3 Sound pressure 93.5 dB Dimensions A 221 mm, B 182 mm, C 75 mm, D 65.5 mm
Hertz HMX 6.5-TC 6.5 inch Coaxial Speakers Masori
937.49 PLN
HMX 6.5-TC by Hertz is a 16.5 cm marine coaxial speaker with 75 W RMS, 150 W Peak, and 4 Ohm. The frequency response ranges from 50–25,000 Hz, with an efficiency of 89 dB. The construction includes a polypropylene diaphragm with UV inhibitors, Santoprene surround, and an aramid fiber spider with silicone-insulated connection wires. The neodymium tweeter with PEI dome and 36 mm diaphragm works with a front plate and acoustic lens, optimized for off-axis radiation and high sound pressure levels. The voice coil of the woofer measures 25 mm, while the tweeter's voice coil is 20 mm, with Xmech at ±6.65 mm. Driven by a solid magnetic group and FEM-optimized high excursion in a marine-grade injected polymer basket. Sealed built-in crossover with resettable solid-state tweeter protection circuit and gold-plated, corrosion-resistant terminals. Dimensions are 165 mm and a depth of 95.6 mm, weight 1 kg. Features 6.5 inch coaxial speaker Marine version Size 165 mm Power handling RMS 75 W Power handling Peak 150 W Impedance 4 Ohm Frequency response 50–25,000 Hz Depth 95.6 mm Tweeter diaphragm 36 mm PEI dome Woofer voice coil 25 mm Tweeter voice coil 20 mm Diaphragm polypropylene with UV inhibitors Santoprene surround Tweeter magnet neodymium Woofer magnet flux ferrite with high density Sound-transparent tweeter grille made of stainless steel Front plate and acoustic lens, optimized for off-axis radiation and high sound pressure levels Aramid fiber spider with silicone-insulated connection wires FEM-optimized drive with high excursion Solid magnetic group in marine-grade injected polymer basket Sealed built-in crossover with resettable solid-state tweeter protection circuit Gold-plated, corrosion-resistant terminals Developed and tested for UV, salt mist, vibrations, splash water, temperature shock, dust Technical Specifications Effective diameter D 125 mm Installation depth 95.6 mm Fs 65 Hz Re 3.5 Ohm Le 0.53 mH Vas 8.8 l Mms 14 g Cms 0.4 mm/N Bl 5.2 T*m Qts 0.7 Qes 0.75 Qms 11.5 Efficiency 89 dB Xmech ±6.65 mm Woofer magnet size 78.5 x 32 x 17 mm Tweeter magnet size 19.7 x 3 mm Dimensions A 172.2 mm, B 128 mm, C 95.6 mm, D 69 mm, F 26.6 mm Speaker weight 1 kg
Hertz HMX 6.5-TW 6.5 inch Coaxial Speakers Masori
937.49 PLN
HMX 6.5-TW is a 6.5 inch (16.5 cm) coaxial speaker from Hertz with 75 W RMS, 150 W Peak, 4 Ohm, and 89 dB SPL. The frequency response ranges from 50 to 25,000 Hz, the diameter is 165 mm, and the depth is 95.6 mm. A neodymium tweeter with a 36 mm PEI dome, front plate, and acoustic lens is designed for off-axis radiation, complemented by a sound-transparent stainless steel grille. The woofer uses a 25 mm voice coil, a polypropylene diaphragm with UV inhibitors, and a molded Santoprene surround, driven by a solid magnetic group with high-density flux ferrite. An aramid fiber spider with silicone-insulated connection wires, an injection-molded marine-grade polymer basket, a sealed built-in crossover with a resettable solid-state tweeter protection circuit, and gold-plated, corrosion-resistant terminals are integrated. Tested for UV, salt mist, vibrations, splash water, temperature shock, and dust. Xmech is ±6.65 mm, and the magnet sizes are 78.5 x 32 x 17 mm (woofer) and 19.7 x 3 mm (tweeter). Features 6.5 inch (16.5 cm) coaxial speaker Developed and tested for UV, salt mist, vibrations, splash water, temperature shock, dust Neodymium tweeter with a 36 mm PEI dome, front plate, and acoustic lens, optimized for off-axis radiation and high sound pressure level Sound-transparent tweeter grille made of stainless steel Long-stroke woofer with a 25 mm voice coil Polypropylene diaphragm with UV inhibitors and molded Santoprene surround Aramid fiber spider with silicone-insulated connection wires FEM-optimized mobile unit with high excursion and solid magnetic group Injection-molded marine-grade polymer basket Sealed built-in crossover with a resettable solid-state tweeter protection circuit Gold-plated, corrosion-resistant terminals Technical Specifications Size 165 mm RMS power 75 W Peak power 150 W Impedance 4 Ohm Depth 95.6 mm Tweeter diaphragm 36 mm Woofer voice coil 25 mm Tweeter voice coil 20 mm Frequency response 50 – 25,000 Hz Woofer magnet size 78.5 x 32 x 17 mm Tweeter magnet size 19.7 x 3 mm Weight per speaker 1 kg Woofer magnet high-density flux ferrite Tweeter magnet neodymium Diaphragm polypropylene with UV inhibitors Xmech ±6.65 mm D 125 mm Re 3.5 Ohm Fs 65 Hz Le 0.53 mH Vas 8.8 l Mms 14 g Cms 0.4 mm/N Bl 5.2 T·m Qts 0.7 Qes 0.75 Qms 11.5 SPL 89 dB A 172.2 mm B 128 mm C 95.6 mm D 69 mm F 26.6 mm
Audison APX 4 4 inch coaxial speakers Masori
376.16 PLN
The Audison APX 4 is a 4-inch coaxial speaker featuring a concentric coaxial tweeter. The construction includes a 32 mm voice coil made of pure copper and a water-resistant paper cone. It is equipped with an acoustic lens, a TPU suspension with a triple-wave profile, and a flat, compact basket. The system has a high-current quick-connect terminal with double contact and a temperature-resistant plastic cover. The continuous power handling is 40 watts RMS, and the peak power handling is 120 watts. All components have been developed and optimized using the KLIPPEL suite. Features 4-inch (10 cm) coaxial speaker Concentric coaxial tweeter Water-resistant paper cone 32 mm voice coil made of pure copper TPU suspension with triple-wave profile Acoustic lens for linear frequency response Optimized installation depth with flat basket High-current quick-connect terminal Developed with KLIPPEL suite Power handling: 40 watts RMS Power handling: 120 watts peak Impedance: 4 ohms Technical Specifications Woofer size: 100 mm Tweeter size: 24 mm Frequency response: 80 Hz – 23,000 Hz Sound pressure level: 91 dB Magnet size: 75 x 40 x 10 mm Tweeter voice coil diameter: 15 mm Xmax: 1.3 mm Vas: 1.5 l Mms: 5.3 g Cms: 0.3 mm/N Bl: 3.2 T·m Qts: 1.0 Qes: 1.2 Qms: 8.0 LE: 0.04 mH
Hertz Dieci DSK 160.3 6.5 inch speaker set Masori
410.64 PLN
The Dieci DSK 160.3 from Hertz is a 6.5 inch Speaker Set with a continuous power of 80 Watts and a peak power of 160 Watts. The system operates with an impedance of 4 Ohms and covers a frequency range of 50 to 23,000 Hz. The sensitivity is specified at 93 dB SPL. The technical components include a 25 mm voice coil for the woofer as well as a Hi Pass Crossover. The woofers weigh 0.73 kg, while the tweeters weigh 0.03 kg and the crossovers weigh 0.16 kg. The dimensions of the components are specified with an outer diameter of 167 mm and a mounting depth of 56.5 mm. Features 6.5 inch (16.5 cm) Speaker Set Power: 80 Watts RMS Power: 160 Watts Peak Impedance: 4 Ohms 25 mm Woofer Voice Coil Hi Pass Crossover Type Woofer Weight: 0.73 kg Tweeter Weight: 0.03 kg Crossover Weight: 0.16 kg Outer Diameter (A): 167 mm Mounting Diameter (B): 127 mm Total Height (C): 66.5 mm Mounting Depth (D): 56.5 mm Technical Specifications Sensitivity: 93 dB SPL Frequency Response: 50 - 23,000 Hz Effective Diaphragm Diameter (D): 124 mm DC Resistance (Re): 3.2 Ohms Resonance Frequency (Fs): 70 Hz Inductance (Le): 0.18 mH Equivalent Volume (Vas): 10.28 l Moving Mass (Mms): 10 g Compliance (Cms): 0.50 mm/N Drive Factor (BL): 4.5 T*m Total Quality (Qts): 0.62 Electrical Quality (Qes): 0.69 Mechanical Quality (Qms): 6.3
Hertz Dieci DSK 170.3 6.5 inch speaker set Masori
410.64 PLN
The Dieci DSK 170.3 by Hertz is a 6.5-inch Speaker Set with a continuous power of 80 Watts and a peak power of 160 Watts. The woofers utilize the exclusive V-Cone profile and a TPU surround made of thermoplastic polyurethane to reduce resonances. The system features a neodymium motor assembly, a PEI diaphragm for the high-frequency range, and a 25 mm voice coil in the woofer. The impedance is 4 Ohms with a sensitivity of 93 dB SPL. The package includes passive filters as high-pass Crossover, which are integrated directly into the connection cables. The technical components are designed for a mounting opening of 140 mm and a mounting depth of 50 mm. Features 6.5-inch (16.5 cm) Speaker Set Power: 80 Watts RMS Power: 160 Watts Max Impedance: 4 Ohms V-Cone profile TPU surround (Thermoplastic Polyurethane) Neodymium motor assembly PEI diaphragm for Tweeter High-pass Crossover 25 mm woofer voice coil Technical Specifications Frequency response: 50 Hz - 23,000 Hz Sensitivity: 93 dB SPL Cut-off frequency: 3.5 kHz at 12 dB Oct. Mounting diameter: 140 mm Mounting depth: 50 mm Total diameter: 165 mm Woofer weight: 0.53 kg Tweeter weight: 0.03 kg Crossover weight: 0.16 kg Fs: 79 Hz Vas: 11.3 l Mms: 10 g Qts: 0.96
Hertz Dieci DS 25.3 10 inch Subwoofer Masori
385.85 PLN
The Hertz Dieci DS 25.3 is a 10 inch Subwoofer with a continuous power handling of 150 watts RMS and a peak power of 600 watts maximum. It is equipped with a polypropylene cone with mica additive and a butyl rubber surround. The model has a 4 Ohm impedance and a voice coil with a diameter of 38 mm. Cooling is achieved through a specific structure for heat dissipation. The enclosure design is optimized for use in compact closed enclosures or reflex enclosures. A ferrite magnet with high flux density drives the system. Features 10 inch (25 cm) Subwoofer Power: 150 watts RMS Power: 600 watts maximum Impedance: 4 Ohm Cone: Polypropylene with mica additive Surround: Butyl rubber Magnet: Ferrite with high flux density Voice coil: 38 mm diameter Enclosure suitability: Closed and reflex Dimension A: 345 mm Dimension B: 245 mm Dimension C: 79 mm Technical specifications Frequency response: 32 - 400 Hz Magnet size: 100 x 50 x 25 mm Weight: 3 kg Xmech: 16 mm Diameter D: 215 mm Xmax: 9 mm Re: 3.3 Ohm Fs: 36 Hz Le: 2.15 mH Vas: 34 liters Mms: 106 g Cms: 0.18 mm/N BL: 8.5 T*m Qts: 0.92 Qes: 1.13 Qms: 5 SPL: 89 dB
Audio System MXC 406 Evo 4 inch x 6" coaxial speakers Masori
342.58 PLN
The MXC 406 Evo from Audio System is a 4 inch x 6 inch coaxial speaker. The system features a 13 mm textile neodymium tweeter and a standard chassis with a fiberglass diaphragm and a Nomex spider. The impedance of the speaker is set at 3 Ohms. The RMS power is rated at 2x 110 Watts, while the maximum power is at 2x 70 Watts. For integration, installation dimensions of 145 mm x 88 mm with a mounting depth of 49 mm are provided. Features Product type: 4 inch x 6 inch coaxial speaker 13 mm textile neodymium tweeter Fiberglass diaphragm Nomex spider Standard chassis Impedance: 3 Ohms RMS power: 2x 110 Watts Maximum power: 2x 70 Watts Technical Specifications Installation dimension: 145 mm x 88 mm Mounting depth: 49 mm
Hertz Dieci DBX 30.3" 12 inch Enclosure Subwoofer Masori
730.53 PLN
The Dieci DBX 30.3 from Hertz is a 12-inch Enclosed Subwoofer with a continuous power handling of 250 W RMS and a peak power of 1000 W. The enclosure is made from a solid MDF construction with a stable structure and features a rear slanted panel. The installed subwoofer unit is a DS Sub with a 38 mm voice coil. The system operates with an impedance of 4 Ohms and covers a frequency range of 28 to 300 Hz. The enclosure shape is designed to reduce wave reflections. The dimensions of the enclosure are 484 mm in width, 343 mm in height, and 227 mm in depth. Features 12-inch (30 cm) Enclosed Subwoofer Continuous power handling: 250 W RMS Peak power: 1000 W Impedance: 4 Ohms Material: Thick-walled MDF enclosure Voice coil diameter: 38 mm Rear slanted panel to reduce wave reflections No filter components (SUB BOX) Technical Specifications Frequency response: 28 - 300 Hz Xmech: 9 mm Width (A): 484 mm Depth (B): 227 mm Height (C): 343 mm
Audison APX 6.5 6.5 inch coaxial speakers Masori
423.05 PLN
The APX 6.5 from Audison is a 6.5-inch coaxial speaker featuring a concentric coaxial tweeter. The nominal power handling is 70 watts RMS with an impedance of 4 ohms, while the peak power reaches 210 watts. The system utilizes a 32-mm voice coil made of pure copper and a Triple-Wave TPU suspension for the diaphragm guidance. The construction consists of a water-resistant paper cone and a compact basket with abrasion-resistant coating. For connection, a high-current quick-connect terminal with double contact is integrated. The development and optimization of the speaker were carried out using KLIPPEL technology. Features 6.5-inch (16.5 cm) coaxial speaker Concentric coaxial tweeter Power: 70 watts RMS Power: 210 watts peak 32-mm voice coil made of pure copper Water-resistant paper cone Triple-Wave TPU suspension Compact basket with abrasion-resistant coating High-current quick-connect terminal Acoustic lens for linear frequency response Technical Specifications Woofer size: 165 mm Tweeter size: 24 mm Impedance: 4 ohms Frequency response: 60 - 23000 Hz Magnet size: 85 x 40 x 15 mm Tweeter voice coil diameter: 15 mm Maximum displacement (Xmax): 2 mm DC resistance (Re): 3.1 ohms Resonance frequency (Fs): 80 Hz Inductance (LE): 0.1 mH Equivalent air volume (Vas): 8.1 liters Moving mass (Mms): 11.5 g Suspension compliance (Cms): 0.33 mm/N Force factor (Bl): 4.6 T·m Total Q factor (Qts): 0.73 Electrical Q factor (Qes): 0.84 Mechanical Q factor (Qms): 5.4 Sound pressure level (SPL): 94 dB
Audison APX 690 6x9 inch Coaxial Speakers Masori
597.96 PLN
The APX 690 from Audison is a coaxial speaker in the elliptical size of 6 x 9 inches. The system features a 40 mm horn-loaded dome tweeter with an efficiency of up to 96 dB SPL, as well as a 15 mm PEI super tweeter. The woofer is equipped with a water-resistant paper cone and a TPU suspension in a triple-wave profile. The mobile voice coil is made of pure copper on Kapton film. The motor assembly has been optimized with KLIPPEL technology and has a low carbon content for high magnetic permeability. The enclosure uses polycotton spider material and a compact, abrasion-resistant basket. Features Product Type: 6x9 inch Coaxial Speaker Manufacturer: Audison Size: 6 x 9 inches Horn-loaded 40 mm dome tweeter 15 mm PEI super tweeter Water-resistant paper cone TPU suspension with triple-wave profile Voice coil made of pure copper on Kapton film Polycotton spider material Compact abrasion- and scratch-resistant basket High-current quick connection Optimization through KLIPPEL technology Technical Specifications Continuous Power Handling: 100 W Peak Power Handling: 300 W Impedance: 4 Ohm Frequency Response: 40 - 23,000 Hz Sound Pressure Level: 96 dB Resonance Frequency (Fs): 60 Hz DC Resistance (Re): 3.2 Ohm Equivalent Air Volume (Vas): 36 l Moving Mass (Mms): 16.6 g Compliance (Cms): 0.5 mm/N Force Factor (Bl): 5.3 T·m Total Q Factor (Qts): 0.6 Electrical Q Factor (Qes): 0.7 Mechanical Q Factor (Qms): 6.7 Inductance (LE): 0.2 mH Maximum Displacement (Xmax): 3.5 mm Woofer Voice Coil Diameter: 25 mm Tweeter Voice Coil Diameter: 20 mm Magnet Size: 90 x 32 x 15 mm
Audison APX 5 5 inch coaxial speakers Masori
422.97 PLN
The Audison APX 5 is a coaxial speaker with a size of 5 inches or 130 mm. The system features a concentric coaxial tweeter as well as an acoustic lens for frequency response. The voice coil is made of pure copper and has a diameter of 32 mm. The diaphragm is made of water-resistant paper, while the suspension is made of TPU with a triple-wave profile. The basket is compactly designed and coated with an abrasion-resistant finish. For connection, there is a high-current quick-connect terminal with a temperature-resistant plastic cover. The development was carried out using Klippel technology. Features 5 inch (13 cm) coaxial speaker Concentric coaxial tweeter Acoustic lens 32 mm voice coil made of pure copper Water-resistant paper cone TPU suspension with triple-wave profile Compact basket with epoxy damping High-current quick-connect terminal Optimized installation depth for OEM integration Developed with the KLIPPEL suite Technical Specifications Woofer size: 130 mm Tweeter size: 24 mm Power: 50 Watts RMS Power: 150 Watts peak Impedance: 4 Ohms Frequency response: 70 – 23,000 Hz Magnet size: 85 x 40 x 13 mm Tweeter voice coil diameter: 15 mm Maximum displacement (Xmax): 2 mm DC resistance (Re): 3.1 Ohms Resonance frequency (Fs): 90 Hz Inductance (LE): 0.07 mH Equivalent air volume (Vas): 3.8 l Moving mass (Mms): 8.2 g Suspension compliance (Cms): 0.33 mm/N Force factor (Bl): 4.6 T·m Total quality factor (Qts): 0.7 Electrical quality factor (Qes): 0.75 Mechanical quality factor (Qms): 10.6 Sound pressure level (SPL): 93 dB
Hifonics Titan TRX462 4 inch x 6" coaxial speakers Masori
215.11 PLN
The Titan TRX462 from Hifonics is a 4 inch x 6 inch coaxial speaker. The system features MICA paper composite membranes and a 13 mm Mylar neodymium tweeter. The rated power handling is 70 Watts RMS, while the maximum power is specified at 140 Watts. The frequency range extends from 65 to 22000 Hz with an impedance of 4 Ohms. The dimensions of the 2-way speaker are 10 x 15 cm with a diameter of 89 x 143 mm. The mounting depth is specified at 51 mm. Features 4 inch x 6 inch coaxial speaker MICA/paper composite membranes 13 mm Mylar neodymium tweeter Power: 70 Watts RMS Power: 140 Watts MAX Impedance: 4 Ohms Technical Specifications Size: 100 x 150 mm Frequency range: 65 - 22000 Hz Diameter: 89 x 143 mm Mounting depth: 51 mm
Hifonics Titan TS42 4 inch coaxial speakers Masori
257.56 PLN
Hifonics Titan TS42 as a 4 inch (10 cm) coaxial speaker with 60 Watts RMS and 120 Watts maximum power. Impedance 4 Ohm. Swiveling 13 mm Neodymium dome tweeter. Polycone diaphragm. Magnet protection and grille included. Mounting depth 44 mm, cutout size 98 mm. Features 4 inch (10 cm) Coaxial Speaker 60 Watts RMS 120 Watts Max. Impedance: 4 Ohm Speaker Size: 4 inches Swiveling 13 mm Neodymium Dome Tweeter Polycone Diaphragm Magnet Protection Includes Grille Mounting Depth: 44 mm Cutout Size: 98 mm Technical Specifications Speaker Size: 100 mm Tweeter Diameter: 13 mm Mounting Depth: 44 mm Cutout Size: 98 mm RMS Power: 60 Watts Maximum Power: 120 Watts Impedance: 4 Ohm Model: TS-42
Audio System RXC 120 EVO 34 Inch Coaxial Speakers Masori
576.17 PLN
The RXC120 EVO3 from Audio System is a 4" (10cm) Coaxial Speaker that impresses with its precise craftsmanship and high-quality components. Equipped with a 19 mm textile neodymium tweeter and an MKP capacitor, the speaker delivers clear and detailed sound. The EXTREM fiberglass membrane and the Nomex spider provide high reliability and durability. With an impedance of 3 Ohms and a power of 2x 120/80 Watts, the speaker fits well into various audio systems. It has an outer diameter of 118 mm and a mounting depth of 51 mm, making it versatile for different applications. Features 19 mm textile neodymium tweeter with high-quality MKP capacitor Standard chassis with EXTREM fiberglass membrane Nomex spider Technical Specifications Impedance: 3 Ohms Power: 2x 120/80 Watts Outer diameter: 118 mm Mounting depth: 51 mm Mounting Ø: 109 mm
ESX Signum SXE42 4 inch coaxial speakers Masori
257.52 PLN
The ESX Signum SXE42 is a 4-inch (10 cm) coaxial speaker from the SIGNUM SXE series. This 2-way system has an RMS power of 60 watts and a maximum power of 120 watts with an impedance of 3 Ω. The frequency range is from 76 to 22000 Hz. Equipped with 13 mm Mylar neodymium tweeters and sandpaper membranes. The mounting depth is 47 mm, and the cutout diameter is 94 mm. Features 4-inch (100 mm) coaxial speaker SIGNUM SXE series 2-way system (pair) 13 mm Mylar neodymium tweeter Sandpaper membranes Technical Specifications Impedance 3 Ω RMS power 60 watts Maximum power 120 watts Frequency range 76–22000 Hz Mounting depth 47 mm Cutout diameter 94 mm
Audio System CO 609 Evo 6x9 Inch Coaxial Speakers Masori
852.63 PLN
The CO 609 Evo from Audio System is a coaxial speaker in the size of 6x9 inches. The system includes a 25 mm textile neodymium tweeter and an external 12 dB crossover. The standard chassis features a 6x9 inch fiberglass diaphragm combined with a Nomex spider. The impedance is 3 Ohms. The RMS power is rated at 150 Watts, while the maximum power is 210 Watts. The package includes matching speaker grilles. Features 6x9 inch coaxial speaker HIGH LEVEL Coaxial System including grille 25 mm textile neodymium tweeter External 12 dB crossover 6x9 inch fiberglass diaphragm Standard chassis with Nomex spider Technical Data Maximum power: 210 Watts RMS power: 150 Watts Impedance: 3 Ohms Outer diameter chassis: 243 mm x 166 mm Mounting depth: 83 mm Mounting diameter: 218 mm x 150 mm
Hertz UNO X 130 5 inch coaxial speakers Masori
219 PLN
The UNO X 130 from Hertz is a 5-inch coaxial speaker with an impedance of 4 ohms. The two-way system features a water-resistant treated paper cone and a foam surround. The 25 mm woofer voice coil is driven by a high-density ferrite magnet. For the high-frequency range, a 24 mm diaphragm with a PEI dome and a neodymium magnet is used. The enclosure is coated with a wear-resistant finish and has a DIN-standard mounting basket. The technical design also includes a specially developed tweeter front plate for optimized off-axis performance. Features 5-inch (13 cm) coaxial speaker Power handling continuous: 40 W Power handling peak: 160 W Water-resistant treated paper cone Foam surround High-density ferrite magnet (woofer) Neodymium magnet (tweeter) PEI dome DIN-standard mounting basket Wear-resistant coating Technical Specifications Impedance: 4 ohms Frequency response: 60 - 21,000 Hz Tweeter diaphragm: 24 mm Woofer voice coil diameter: 25 mm Tweeter voice coil diameter: 14 mm Woofer magnet size (D x T x H): 70 x 32 x 15 mm Tweeter magnet size (D x H): 13 x 1.5 mm Weight per speaker: 0.56 kg Xmech: ±3.5 mm Overall diameter (A): 130 mm Mounting diameter (B): 116 mm Overall depth (C): 59 mm Mounting depth (D): 52 mm
Audio System MXC 609 Evo 6x9 inch Coaxial Speakers Masori
640.28 PLN
The MXC 609 Evo from Audio System is a 6x9 inch coaxial speaker. The system features a 19 mm textile neodymium tweeter and a fiberglass membrane with Nomex spider. The RMS power is 170 watts per channel with an impedance of 3 ohms. The maximum power is rated at 2x 110 watts. The delivery includes a protective grille for installation. The mounting depth of the speaker is 74 mm and the installation dimensions are 218 mm x 150 mm. Features 6x9 inch coaxial speaker 19 mm textile neodymium tweeter Fiberglass membrane Nomex spider Includes protective grille RMS power: 2x 170 watts Maximum power: 2x 110 watts Technical Specifications Impedance: 3 ohms Installation dimensions: 218 mm x 150 mm Mounting depth: 74 mm
Audio System MXC 100 Evo 4 inch coaxial speakers
342.58 PLN
The MXC 100 Evo from Audio System is a 4-inch coaxial speaker. It features a 13 mm textile neodymium tweeter and a fiberglass membrane with a Nomex spider. The RMS power is rated at 100 watts per channel with an impedance of 3 ohms. The system has an outer diameter of 102 mm and a mounting depth of 46 mm. The maximum power is 60 watts. This 100 mm coaxial speaker system is designed for flexible installation. Features 4-inch (10 cm) coaxial speaker Audio System MXC 100 Evo 13 mm textile neodymium tweeter Fiberglass membrane Nomex spider Impedance: 3 ohms RMS power: 2x 100 watts Maximum power: 2x 60 watts Technical Specifications Outer diameter of chassis: 102 mm Total outer diameter: 128 mm Mounting depth: 46 mm Mounting diameter: 91 mm System type: 100 mm coaxial
Audio System M 100 Evo 2 4 inch speaker set Masori
640.94 PLN
The M 100 Evo 2 from Audio System is a 4-inch Speaker Set designed as a 2-way High Efficient Compo System. The set consists of two HS 24 EVO2 Tweeters including FWK TW crossover as well as two MS 100 EVO mid-bass drivers. The components have an impedance of 3 Ohms. The maximum power is rated at 2x 110 Watts, while the nominal power is 70 Watts. For the installation of the 100 mm speakers, a mounting depth of 48 mm and a mounting diameter of 91 mm are required. Features 4 inch (10cm) Speaker Set 100 mm 2-way High Efficient Compo System 2x Tweeter model HS 24 EVO2 Crossover FWK TW for Tweeters 2x mid-bass driver model MS 100 EVO Impedance: 3 Ohms Maximum power: 2x 110 Watts Nominal power: 70 Watts Mounting depth: 48 mm Mounting diameter: 91 mm
Hertz HMX 8-TW 8 inch coaxial speaker Masori
1192.64 PLN
HMX 8-TW is an 8-inch (20 cm) coaxial speaker from Hertz with 4 Ohm, 100 W RMS, and 200 W Peak. The frequency response ranges from 45 to 25000 Hz, and the sound pressure level is 91 dB. The tweeter uses neodymium and a PEI dome, is optimized for off-axis radiation, and features a 36 mm tweeter diaphragm along with a 20 mm tweeter voice coil. The woofer has a 32 mm voice coil, a high-density ferrite magnet, and a polypropylene diaphragm with UV inhibitors, along with a molded Santoprene surround. It includes an aramid fiber spider with silicone-insulated connection wires, a sealed built-in crossover with a resettable solid-state tweeter protection circuit, and gold-plated corrosion-resistant terminals. The assembly is FEM-optimized for high excursion and features a massive magnetic group in a marine-grade injected polymer basket; Xmech is ±8.5 mm. The depth is 123 mm, and the weight per speaker is 1.66 kg; magnetic assembly dimensions and other measurements are specified. Designed and tested for UV, salt mist, vibrations, splash water, temperature shock, and dust. Features 8-inch (20 cm) coaxial speaker Marine-grade, designed and tested for UV, salt mist, vibrations, splash water, temperature shock, and dust Neodymium tweeter 36 mm with PEI dome Front plate and acoustic lens, optimized for off-axis radiation Stainless steel tweeter grille Polypropylene diaphragm with UV inhibitors Molded Santoprene surround Aramid fiber spider with silicone-insulated connection wires FEM-optimized high-excursion assembly, massive magnetic group Injected polymer basket in marine-grade Sealed built-in crossover with resettable solid-state tweeter protection circuit Gold-plated, corrosion-resistant terminals Technical Specifications Size 200 mm Impedance 4 Ohm Power handling RMS 100 W Power handling Peak 200 W Depth 123 mm Tweeter diaphragm 36 mm Woofer voice coil Ø 32 mm Tweeter voice coil Ø 20 mm Frequency response 45 - 25000 Hz Woofer magnet size B x T x H 90 x 40 x 20 mm Tweeter magnet size B x H 19.7 x 3 mm Weight per speaker 1.66 kg Woofer magnet ferrite with high density Tweeter magnet neodymium Xmech ±8.5 mm D 174 mm Re 3.1 Ohm Fs 50 Hz Le 0.52 mH Vas 29.46 l Mms 27.3 g Cms 0.37 mm/N Bl 6.6 T m Qts 0.58 Qes 0.61 Qms 11 Spl 91 dB Dimension A 225 mm Dimension B 180 mm Dimension C 123 mm Dimension D 91 mm Dimension F 32 mm