Hertz Cento CS 250 S2 / S4 10 Inch Subwoofer Masori
598.09 PLN
Zbadaj szczegółową kartę z pełnymi informacjami, porównaj ceny i znajdź funkcje dla PRODUKTNAME, oferowanego w cenie PRICEMONET; należy do kategorii CATEGORYNAME; produkcja prowadzona przez PRODUCERNAME, a sprzedaż przez SELLERNAME.
Hertz Cento CS 250 S2 / S4 is a 10 inch (25 cm) Subwoofer with 300 W RMS and 600 W Peak. The impedance is 2 Ohm or 4 Ohm depending on the version. Equipped with a 35 mm voice coil made of pure copper on a fiberglass carrier, high-density ferrite magnet assembly, and polypropylene membrane. Flow dynamics optimization system to reduce distortion caused by air compression at high excursions. Xmax is 12.5 mm, Xmech 16.5 mm, resonance frequency 30 Hz. Electroacoustic design for enclosures from 16 liters. Terminal block for cables up to 8 AWG, rubber protection of the magnet assembly, and ABS seal. Magnet size 120 x 45 x 34 mm, weight 3.795 kg. Features 10 inch (25 cm) Subwoofer RMS power 300 W Peak power 600 W Impedance 2 Ohm or 4 Ohm (S2/S4) Voice coil 35 mm, 2 Ohm, six-layer made of pure copper on fiberglass carrier Polypropylene membrane Flow dynamics optimization system Membrane and dust cap geometry FEM-optimized Optimized magnetic group geometry Terminal block with pressure contacts for cables up to 8 AWG Rubber protection of the magnet assembly and high-strength ABS seal Electroacoustic design optimized for enclosures from 16 liters Suitable for custom boxes without decompression hole Technical data Size 250 mm Voice coil diameter 35 mm Magnet size 120 x 45 x 34 mm Weight 3.795 kg Xmech 16.5 mm A 270 mm B 231 mm C 132 mm D 115 mm E 260 mm F 28.3 mm D 216 mm Xmax 12.5 mm Re 2.2 Ohm Fs 30 Hz Le 2.38 mH Vas 32 liters Mms 166 g Cms 0.17 mm/N BL 11.5 T·m Qts 0.49 Qes 0.52 Qms 9.4 SPL 84 dB Sealed box volume 16 liters Fb 50 Hz Qtc 0.87 Enclosure dimensions sealed B 385 mm, H 385 mm, D 180 mm Mounting hole 231 mm Wood thickness 19 mm Sheet cut A 385 x 385 mm, quantity 2 Sheet cut B 385 x 142 mm, quantity 2 Sheet cut C 347 x 142 mm, quantity 2
EAN: 8018823130363
Koszt dostawy: 8 PLN
Dostępność: in stock
Czas dostawy: 1-3 dni robocze
Stan: new
Hertz Cento CS 250 S2 / S4 is a 10 inch (25 cm) Subwoofer with 300 W RMS and 600 W Peak. The impedance is 2 Ohm or 4 Ohm depending on the version. Equipped with a 35 mm voice coil made of pure copper on a fiberglass carrier, high-density ferrite magnet assembly, and polypropylene membrane. Flow dynamics optimization system to reduce distortion caused by air compression at high excursions. Xmax is 12.5 mm, Xmech 16.5 mm, resonance frequency 30 Hz. Electroacoustic design for enclosures from 16 liters. Terminal block for cables up to 8 AWG, rubber protection of the magnet assembly, and ABS seal. Magnet size 120 x 45 x 34 mm, weight 3.795 kg. Features 10 inch (25 cm) Subwoofer RMS power 300 W Peak power 600 W Impedance 2 Ohm or 4 Ohm (S2/S4) Voice coil 35 mm, 2 Ohm, six-layer made of pure copper on fiberglass carrier Polypropylene membrane Flow dynamics optimization system Membrane and dust cap geometry FEM-optimized Optimized magnetic group geometry Terminal block with pressure contacts for cables up to 8 AWG Rubber protection of the magnet assembly and high-strength ABS seal Electroacoustic design optimized for enclosures from 16 liters Suitable for custom boxes without decompression hole Technical data Size 250 mm Voice coil diameter 35 mm Magnet size 120 x 45 x 34 mm Weight 3.795 kg Xmech 16.5 mm A 270 mm B 231 mm C 132 mm D 115 mm E 260 mm F 28.3 mm D 216 mm Xmax 12.5 mm Re 2.2 Ohm Fs 30 Hz Le 2.38 mH Vas 32 liters Mms 166 g Cms 0.17 mm/N BL 11.5 T·m Qts 0.49 Qes 0.52 Qms 9.4 SPL 84 dB Sealed box volume 16 liters Fb 50 Hz Qtc 0.87 Enclosure dimensions sealed B 385 mm, H 385 mm, D 180 mm Mounting hole 231 mm Wood thickness 19 mm Sheet cut A 385 x 385 mm, quantity 2 Sheet cut B 385 x 142 mm, quantity 2 Sheet cut C 347 x 142 mm, quantity 2
EAN: 8018823130363
Koszt dostawy: 8 PLN
Dostępność: in stock
Czas dostawy: 1-3 dni robocze
Stan: new
Porównanie podobnych produktów
Hertz Cento CS 250 S2 / S4 10 Inch Subwoofer Masori
598.09 PLN
Hertz Cento CS 250 S2 / S4 is a 10 inch (25 cm) Subwoofer with 300 W RMS and 600 W Peak. The impedance is 2 Ohm or 4 Ohm depending on the version. Equipped with a 35 mm voice coil made of pure copper on a fiberglass carrier, high-density ferrite magnet assembly, and polypropylene membrane. Flow dynamics optimization system to reduce distortion caused by air compression at high excursions. Xmax is 12.5 mm, Xmech 16.5 mm, resonance frequency 30 Hz. Electroacoustic design for enclosures from 16 liters. Terminal block for cables up to 8 AWG, rubber protection of the magnet assembly, and ABS seal. Magnet size 120 x 45 x 34 mm, weight 3.795 kg. Features 10 inch (25 cm) Subwoofer RMS power 300 W Peak power 600 W Impedance 2 Ohm or 4 Ohm (S2/S4) Voice coil 35 mm, 2 Ohm, six-layer made of pure copper on fiberglass carrier Polypropylene membrane Flow dynamics optimization system Membrane and dust cap geometry FEM-optimized Optimized magnetic group geometry Terminal block with pressure contacts for cables up to 8 AWG Rubber protection of the magnet assembly and high-strength ABS seal Electroacoustic design optimized for enclosures from 16 liters Suitable for custom boxes without decompression hole Technical data Size 250 mm Voice coil diameter 35 mm Magnet size 120 x 45 x 34 mm Weight 3.795 kg Xmech 16.5 mm A 270 mm B 231 mm C 132 mm D 115 mm E 260 mm F 28.3 mm D 216 mm Xmax 12.5 mm Re 2.2 Ohm Fs 30 Hz Le 2.38 mH Vas 32 liters Mms 166 g Cms 0.17 mm/N BL 11.5 T·m Qts 0.49 Qes 0.52 Qms 9.4 SPL 84 dB Sealed box volume 16 liters Fb 50 Hz Qtc 0.87 Enclosure dimensions sealed B 385 mm, H 385 mm, D 180 mm Mounting hole 231 mm Wood thickness 19 mm Sheet cut A 385 x 385 mm, quantity 2 Sheet cut B 385 x 142 mm, quantity 2 Sheet cut C 347 x 142 mm, quantity 2
Hertz Cento CS 200 S4 8 Inch Subwoofer Masori
512.88 PLN
Hertz Cento CS 200 S4 is an 8 inch (20 cm) Subwoofer with 4 Ohm single voice coil and 150 W RMS as well as 300 W Peak. The voice coil with a diameter of 35 mm works with a high-density ferrite magnet; the diaphragm is made of polypropylene. A special cooling system, dynamic fluid optimization, and a highly resistant ABS plastic seal are integrated. Xmax is 9 mm, Xmech 11.5 mm, the resonance frequency is 40 Hz; Re 3.3 Ohm and Le 1.7 mH. Other specifications: Vas 13.7 l, Mms 76.8 g, Cms 0.21 mm/N, BL 10.6 T·m, Qts 0.52, Qes 0.58, Qms 5, sound pressure 84 dB. Effective diaphragm diameter 172 mm, magnet size 120 x 50 x 28 mm, weight 2.87 kg. Version without filter component, with reduced installation depth and compact design. Features 8 inch (20 cm) Subwoofer Impedance 4 Ohm Power handling RMS 150 W Power handling Peak 300 W Single voice coil Voice coil Ø 35 mm Magnet high-density ferrite Diaphragm polypropylene Special cooling system Dynamic fluid optimization Highly resistant ABS plastic seal Reduced installation depth Compact design Without filter component Weight 2.87 kg Technical specifications Size 200 mm Effective diaphragm diameter 172 mm Xmax 9 mm Xmech 11.5 mm Re 3.3 Ohm Fs 40 Hz Le 1.7 mH Vas 13.7 l Mms 76.8 g Cms 0.21 mm/N BL 10.6 T·m Qts 0.52 Qes 0.58 Qms 5 Sound pressure 84 dB Magnet size 120 x 50 x 28 mm A 213 mm B 177 mm C 114 mm D 101 mm E 201 mm F 24 mm
Hertz Cento CS 300 S2 / S4 12 Inch Subwoofer Masori
725.81 PLN
Hertz Cento CS 300 S2 / S4 is a 12 inch (30 cm) Subwoofer with 350 W RMS and 700 W Peak. The impedance is either 2 Ohm or 4 Ohm depending on the version. Version with 35 mm voice coil on fiberglass carrier and high-density ferrite magnet. Polypropylene membrane and optimized dust cap geometry. Flow dynamics optimization system. Xmax 12.5 mm and Xmech 16.5 mm. Electroacoustic design for enclosures from 32 liters. Terminal block with pressure contacts for cable cross-sections up to approx. 8.37 mm² and version without decompression opening. Features 12 inch (30 cm) Subwoofer RMS power 350 W Peak power 700 W Impedance 2 Ohm or 4 Ohm Electroacoustic design for enclosures from 32 liters Flow dynamics optimization system Polypropylene membrane and dust cap Voice coil 35 mm, six-layer pure copper on fiberglass carrier Magnet made of high-density flux ferrite Without decompression opening Terminal block with pressure contacts, suitable for cables up to approx. 8.37 mm² Rubber protection of the magnet assembly and ABS seal; optional protective grille can be attached Technical data Size 300 mm Voice coil Ø 35 mm Magnet size (B x D x H) 134 x 45 x 34 mm Weight 4.844 kg Xmax 12.5 mm Xmech 16.5 mm D 267.01 mm Re 2.2 Ohm Fs 25 Hz Le 2.8 mH Vas 87.25 liters Mms 205 g Cms 0.20 mm/N BL 12 T*m Qts 0.46 Qes 0.49 Qms 7.2 SPL 86.5 dB A 318 mm B 281 mm C 147 mm D 130 mm E 308 mm F 28.3 mm Enclosure data (sealed box): Volume 32 liters, Fb 50 Hz, Qtc 0.9 Enclosure dimensions (sealed): B 495 mm, H 495 mm, D 200 mm Mounting cutout 281 mm Wood thickness 19 mm Plate cut (sealed): A 495 x 495 mm (2x), B 495 x 162 mm (2x), C 475 x 162 mm (2x)
Hertz Cento CS 300 S2 / S4 12 Inch Subwoofer Masori
725.81 PLN
Hertz Cento CS 300 S2 / S4 is a 12 inch (30 cm) Subwoofer with 350 W RMS and 700 W Peak. The impedance is either 2 Ohm or 4 Ohm depending on the version. Version with 35 mm voice coil on fiberglass carrier and high-density ferrite magnet. Polypropylene membrane and optimized dust cap geometry. Flow dynamics optimization system. Xmax 12.5 mm and Xmech 16.5 mm. Electroacoustic design for enclosures from 32 liters. Terminal block with pressure contacts for cable cross-sections up to approx. 8.37 mm² and version without decompression opening. Features 12 inch (30 cm) Subwoofer RMS power 350 W Peak power 700 W Impedance 2 Ohm or 4 Ohm Electroacoustic design for enclosures from 32 liters Flow dynamics optimization system Polypropylene membrane and dust cap Voice coil 35 mm, six-layer pure copper on fiberglass carrier Magnet made of high-density flux ferrite Without decompression opening Terminal block with pressure contacts, suitable for cables up to approx. 8.37 mm² Rubber protection of the magnet assembly and ABS seal; optional protective grille can be attached Technical data Size 300 mm Voice coil Ø 35 mm Magnet size (B x D x H) 134 x 45 x 34 mm Weight 4.844 kg Xmax 12.5 mm Xmech 16.5 mm D 267.01 mm Re 2.2 Ohm Fs 25 Hz Le 2.8 mH Vas 87.25 liters Mms 205 g Cms 0.20 mm/N BL 12 T*m Qts 0.46 Qes 0.49 Qms 7.2 SPL 86.5 dB A 318 mm B 281 mm C 147 mm D 130 mm E 308 mm F 28.3 mm Enclosure data (sealed box): Volume 32 liters, Fb 50 Hz, Qtc 0.9 Enclosure dimensions (sealed): B 495 mm, H 495 mm, D 200 mm Mounting cutout 281 mm Wood thickness 19 mm Plate cut (sealed): A 495 x 495 mm (2x), B 495 x 162 mm (2x), C 475 x 162 mm (2x)
Hertz Mille Pro MPS 250 S4 / S2 10 Inch Flat Subwoofer
1362.64 PLN
Hertz Mille Pro MPS 250 S4 / S2 is a 10-inch (25 cm) flat subwoofer with an ultra-flat mounting depth of 83.6 mm and installation depth of 82.6 mm. The continuous power handling is 500 W, with a peak power handling of 1000 W. Features a 38 mm six-layer copper voice coil, aluminum die-cast design, and non-vented rear design. Air Intercooling REvolution (A.I.R.) to prevent air compression. Mechanical displacement +20% compared to conventional designs, Xmax 16.8 mm and Xmech 20 mm. Frequency response 25–400 Hz, magnet made of high-density ferrite, polypropylene cone. Sturdy, screwless mesh grille included and 8-AWG connectors. Optimized for extremely compact, sealed enclosures. Features 10-inch (25 cm) flat subwoofer Ultra-flat mounting 83.6 mm Installation depth 82.6 mm Continuous power handling 500 W Peak power handling 1000 W Optimized for extremely compact, sealed enclosures Aluminum die-cast design Non-vented rear design 38 mm six-layer copper voice coil A.I.R. Air Intercooling REvolution Sturdy, screwless mesh grille included 8-AWG connectors Frequency response 25–400 Hz Weight 5.11 kg Magnet: high-density ferrite Cone: polypropylene Technical Specifications Size 250 mm Voice coil type single Voice coil Ø 38 mm Magnet size 134 x 55 x 36 mm Xmax 16.8 mm Xmech 20 mm Impedance 2 Ohm (S2) Electro-acoustic data S4: D 216.6 mm; Re 3.3 Ohm; Fs 29 Hz; Le 3.65 mH; Mms 234 g; Cms 0.11 mm/N; BIS 17.3 T*m; Qts 0.48; NS 0.52; Qms 5.6; SPL 83.5 dB Electro-acoustic data S2: D 216.6 mm; Re 2.2 Ohm; Fs 28 Hz; LE 2.67 mH; Mms 250 g; Cms 0.13 mm/N; BIS 14.7 T*m; Qts 0.41; NS 0.45; Qms 5.3; SPL 82.5 dB Physical dimensions: A 274.5 mm; B 231.6 mm; C 103.2 mm; D 82.6 mm; E 244.6 mm; F 38.9 mm Sealed enclosure: Volume 14.2 l net; FC 49 Hz; Qtc 0.81 Sealed enclosure external dimensions: W 386 mm; H 352 mm; D 160 mm Mounting hole M 232 mm (sealed) Wood thickness 16 mm (sealed) Panel cut for sealed: 386 x 352 mm (quantity 2); 386 x 128 mm (quantity 2); 320 x 128 mm (quantity 2) Reflex box: Volume 19 l; Fb 35.5 Hz Reflex box external dimensions: W 713 mm; H 372 mm; D 130 mm; Z 146 mm; P 98 mm; S 52.3 mm Mounting hole M 232 mm (reflex) Wood thickness 16 mm (reflex) Panel cut for reflex: 713 x 372 mm (quantity 2); 713 x 98 mm (quantity 2); 340 x 98 mm (quantity 1); 288 x 98 mm (quantity 1); 495 x 98 mm (quantity 1)
Hertz Mille Pro MPS 250 S4 / S2 10 Inch Flat Subwoofer
1362.64 PLN
Hertz Mille Pro MPS 250 S4 / S2 is a 10-inch (25 cm) flat subwoofer with an ultra-flat mounting depth of 83.6 mm and installation depth of 82.6 mm. The continuous power handling is 500 W, with a peak power handling of 1000 W. Features a 38 mm six-layer copper voice coil, aluminum die-cast design, and non-vented rear design. Air Intercooling REvolution (A.I.R.) to prevent air compression. Mechanical displacement +20% compared to conventional designs, Xmax 16.8 mm and Xmech 20 mm. Frequency response 25–400 Hz, magnet made of high-density ferrite, polypropylene cone. Sturdy, screwless mesh grille included and 8-AWG connectors. Optimized for extremely compact, sealed enclosures. Features 10-inch (25 cm) flat subwoofer Ultra-flat mounting 83.6 mm Installation depth 82.6 mm Continuous power handling 500 W Peak power handling 1000 W Optimized for extremely compact, sealed enclosures Aluminum die-cast design Non-vented rear design 38 mm six-layer copper voice coil A.I.R. Air Intercooling REvolution Sturdy, screwless mesh grille included 8-AWG connectors Frequency response 25–400 Hz Weight 5.11 kg Magnet: high-density ferrite Cone: polypropylene Technical Specifications Size 250 mm Voice coil type single Voice coil Ø 38 mm Magnet size 134 x 55 x 36 mm Xmax 16.8 mm Xmech 20 mm Impedance 2 Ohm (S2) Electro-acoustic data S4: D 216.6 mm; Re 3.3 Ohm; Fs 29 Hz; Le 3.65 mH; Mms 234 g; Cms 0.11 mm/N; BIS 17.3 T*m; Qts 0.48; NS 0.52; Qms 5.6; SPL 83.5 dB Electro-acoustic data S2: D 216.6 mm; Re 2.2 Ohm; Fs 28 Hz; LE 2.67 mH; Mms 250 g; Cms 0.13 mm/N; BIS 14.7 T*m; Qts 0.41; NS 0.45; Qms 5.3; SPL 82.5 dB Physical dimensions: A 274.5 mm; B 231.6 mm; C 103.2 mm; D 82.6 mm; E 244.6 mm; F 38.9 mm Sealed enclosure: Volume 14.2 l net; FC 49 Hz; Qtc 0.81 Sealed enclosure external dimensions: W 386 mm; H 352 mm; D 160 mm Mounting hole M 232 mm (sealed) Wood thickness 16 mm (sealed) Panel cut for sealed: 386 x 352 mm (quantity 2); 386 x 128 mm (quantity 2); 320 x 128 mm (quantity 2) Reflex box: Volume 19 l; Fb 35.5 Hz Reflex box external dimensions: W 713 mm; H 372 mm; D 130 mm; Z 146 mm; P 98 mm; S 52.3 mm Mounting hole M 232 mm (reflex) Wood thickness 16 mm (reflex) Panel cut for reflex: 713 x 372 mm (quantity 2); 713 x 98 mm (quantity 2); 340 x 98 mm (quantity 1); 288 x 98 mm (quantity 1); 495 x 98 mm (quantity 1)
Hertz Dieci DBX 25.3 10 inch Enclosure Subwoofer Masori
640.95 PLN
The Dieci DBX 25.3 from Hertz is a 10-inch Enclosed Subwoofer with a continuous power handling of 150 watts and a peak power of 600 watts. The system features a SUB BOX design without a filter component and operates with an impedance of 4 ohms. The enclosure is made from thick MDF panels and includes a rear slanted plate to reduce wave reflections. The integrated DS subwoofer unit is equipped with a 38 mm voice coil. The frequency response of the system ranges from 32 to 400 Hz with a maximum mechanical excursion of 9 mm. With dimensions of 443 mm in width, 227 mm in depth, and 298 mm in height, the enclosure is compactly designed. Features 10-inch (25 cm) Enclosed Subwoofer Material: Thick MDF enclosure Rear slanted plate for reflection reduction DS subwoofer unit SUB BOX design without filter component Continuous power handling: 150 watts Peak power handling: 600 watts Impedance: 4 ohms Technical Specifications Voice coil diameter: 38 mm Frequency response: 32 - 400 Hz Xmech: 9 mm Width (A): 443 mm Depth (B): 227 mm Height (C): 298 mm
Hertz Cento C 165 6.5 inch midbass driver Masori
384.89 PLN
The Cento C 165 is a 6.5-inch (16.5 cm) mid-bass speaker from Hertz. The diaphragm uses SPP-M (Semi Pressed Paper-Mica) and combines semi-pressed paper with mica. The frequency response ranges from 55–7000 Hz, the voice coil has a diameter of 25 mm, and the mechanical stroke (Xmech) is 4.9 mm. The magnet is made of high-density flux ferrite with dimensions of 85 x 32 x 15 mm. The weight per speaker is 0.96 kg. The parameters include Re 3.2 Ohm, Fs 60 Hz, Le 0.2 mH, Vas 13.24 l, Mms 13.9 g, Cms 0.51 mm/N, BL 4.9 T*m, Qts 0.59, Qes 0.69, Qms 3.9, and SPL 93 dB. Physical dimensions: A 165 mm, B 142 mm, C 71 mm, D 62.5 mm, E 171 mm, F 24 mm. Features 6.5-inch (16.5 cm) mid-bass speaker Diaphragm: SPP-M (Semi Pressed Paper-Mica) Diaphragm material: semi-pressed paper + mica Magnet: high-density flux ferrite Magnet size: 85 x 32 x 15 mm Voice coil: Ø 25 mm Weight per speaker: 0.96 kg Component: Woofer Technical Specifications Impedance: 4 Ohm RMS power: 70 W Peak power: 210 W Frequency response: 55–7000 Hz Xmech: 4.9 mm Re: 3.2 Ohm Fs: 60 Hz Le: 0.2 mH Vas: 13.24 l Mms: 13.9 g Cms: 0.51 mm/N BL: 4.9 T*m Qts: 0.59 Qes: 0.69 Qms: 3.9 SPL: 93 dB D: 131.5 mm Dimensions: A 165 mm, B 142 mm, C 71 mm, D 62.5 mm, E 171 mm, F 24 mm
Hertz Uno S 300 S4 12 inch Subwoofer Masori
344.35 PLN
The Uno S 300 S4 from Hertz is a 12-inch Subwoofer with a continuous power handling of 250 Watts RMS and a peak power of 1000 Watts. The system has an impedance of 4 Ohms and a 38 mm voice coil. The technical features include a ferrite magnet with high flux density and a coated pressed paper diaphragm. The physical construction has a weight of 3 kg and an Xmech value of ±15.1 mm. With a sound pressure level of 89.5 dB, the model is designed for integration into various acoustic systems. Features 12-inch (30 cm) Subwoofer Continuous power handling: 250 Watts RMS Peak power: 1000 Watts Impedance: 4 Ohms 38 mm voice coil Ferrite magnet with high flux density Diaphragm made of coated pressed paper Weight: 3 kg Xmech: ±15.1 mm Technical Specifications Magnet size: 134 x 45 x 34 mm Effective diaphragm diameter (D): 258 mm Xmax: 9.1 mm DC resistance (Re): 3.6 Ohms Resonance frequency (Fs): 33 Hz Equivalent volume (Vas): 82.2 l Moving mass (Mms): 112 g Compliance (Cms): 0.21 mm/N Force factor (BL): 11.3 Tm Total Q factor (Qts): 0.6 Electrical Q factor (Qes): 0.65 Mechanical Q factor (Qms): 7.8 Sound pressure level (Spl): 89.5 dB Outer diameter (A): 307 mm Mounting diameter (B): 280 mm Total height (C): 128 mm Mounting depth (D): 121 mm
Hertz CBA250 10 inch Active Enclosure Subwoofer Masori
1915.51 PLN
The CBA 250 from Hertz is a 10-inch active enclosure subwoofer with an integrated amplifier module that produces 250 watts RMS. The system utilizes He-Li technology and achieves an efficiency of 90 percent at an impedance of 0.4 ohms. The construction is based on the 2S² design and features a diaphragm made of pressed paper as well as a 60 mm copper voice coil. The equipment includes an SSP connection block for plug and play connections, a bypassable Butterworth low-pass filter with a variable cutoff frequency of 50 to 200 Hz, and an adjustable bass boost at 45 Hz. Integration is done via high-level speaker inputs or low-level RCA inputs. Features 10-inch (25 cm) active enclosure subwoofer Power: 250 watts RMS Power: 500 watts peak Impedance: 0.4 ohms Diaphragm material: Pressed paper Voice coil material: Copper Magnet: High density flux ferrite He-Li technology with 90 percent efficiency 2S² design (2 sides / 2 sounds) SSP (Sub Smart Plug) connection block Butterworth low-pass filter: 12 dB/oct. Bass boost: 0 to 6 dB at 45 Hz Phase controller: 0 to 180 degrees Technical Specifications Size: 250 mm Voice coil diameter: 60 mm Frequency response: 20 Hz - 200 Hz Magnet size: 140 x 70 x 30 mm Xmech: 14.75 mm Length: 440 mm Width: 334 mm Height: 135 mm (158 mm with stand)
Hertz HMS 10 S2-LD-SW 10 inch Subwoofer Masori
1447.54 PLN
Hertz HMS 10 S2-LD-SW is a 10 inch marine subwoofer with a diameter of 25 cm. The RMS power is 250 W, the peak power is 500 W, and the impedance is 2 Ohm. The design includes a 50 mm voice coil, a high-density ferrite magnet, and a polypropylene diaphragm with UV inhibitors. A removable sport grill with integrated LEDs is included. Designed for operation without a special enclosure. The installation depth is 191 mm; Xmax 12.3 mm and Xmech ±16.3 mm; effective diaphragm diameter 210 mm. Additional specifications: Fs 43 Hz, Re 2.1 Ohm, Le 0.46 mH, Vas 30.46 l, Mms 75.6 g, Cms 0.18 mm/N, BL 8.3 T*m, Qts 0.60, Qes 0.63, Qms 12.3, sound pressure level 88.5 dB. Weight per component 5.1 kg; magnet size 140 x 60 x 30 mm. Features 10 inch Subwoofer Diameter 25 cm RMS power 250 W Peak power 500 W Impedance 2 Ohm Voice coil 50 mm Diaphragm polypropylene with UV inhibitors Magnet ferrite with high density Installation depth 191 mm Removable sport grill with integrated LEDs Operation without special enclosure Weight 5.1 kg Technical data Size 250 mm Effective diaphragm diameter D 210 mm Magnet size 140 x 60 x 30 mm Xmax 12.3 mm Xmech ±16.3 mm Re 2.1 Ohm Fs 43 Hz Le 0.46 mH Vas 30.46 l Mms 75.6 g Cms 0.18 mm/N BL 8.3 T*m Qts 0.60 Qes 0.63 Qms 12.3 Sound pressure level 88.5 dB Dimension A 277 mm Dimension B 230 mm Dimension C 191 mm Dimension D 145 mm Dimension F 46 mm Compact sealed box Vb 50 l Compact sealed box Fb 54 Hz Compact sealed box Qtc 1.05 Compact sealed box W 440 mm Compact sealed box H 440 mm Compact sealed box D 365 mm Compact sealed box mounting hole 230 mm Compact sealed box wood thickness 19 mm Compact sheet cut A 440 x 440 mm Quantity 2 Compact sheet cut B 440 x 327 mm Quantity 2 Compact sheet cut C 402 x 327 mm Quantity 2 Sealed box Vb 71 l Sealed box Fb 51 Hz Sealed box Qtc 0.99 Sealed box W 460 mm Sealed box H 460 mm Sealed box D 450 mm Sealed box mounting hole 230 mm Sealed box wood thickness 19 mm Sheet cut A 460 x 460 mm Quantity 2 Sheet cut B 460 x 412 mm Quantity 2 Sheet cut C 422 x 412 mm Quantity 2
Hertz HMS 10 S2-LD-G 10 Inch Subwoofer Masori
1447.51 PLN
HMS 10 S2-LD-G is a 10-inch (25 cm) Subwoofer from Hertz with 2 Ohm, 250 W RMS, and 500 W Peak. It features a 50 mm voice coil, a high-density ferrite magnet, and a polymer injection basket. The diaphragm is made of polypropylene with UV inhibitors, combined with a specially shaped Santoprene surround and a progressive aramid centering spider with silicone-coated connection wires. The mobile unit is FEM-optimized and designed for high excursion, with Xmax 12.3 mm and Xmech ±16.3 mm. Integrated RGB LED lighting and a sound-transparent, removable, and paintable sport grill, compatible with HM RGB 1 BK. Certification Hertz Pure Marine Certified including IP65, ASTM-D4329, and ASTM-B117. Installation depth 191 mm, mounting hole 230 mm, magnet size 140 x 60 x 30 mm, and weight 5.1 kg. Designed for high-performance operation and free air operation. Features 10-inch Subwoofer Diameter 250 mm Impedance 2 Ohm RMS power 250 W Peak power 500 W Installation depth 191 mm Mounting hole 230 mm Voice coil 50 mm Magnet size 140 x 60 x 30 mm Weight 5.1 kg Diaphragm polypropylene with UV inhibitors Surround Santoprene, specially shaped Progressive centering spider made of aramid fibers Connection wires silicone-coated FEM-optimized mobile unit with high excursion High-density ferrite magnet Marine-grade polymer injection basket Integrated RGB LED lighting Sound-transparent, removable, and paintable sport grill Hertz Pure Marine Certified: IP65, ASTM-D4329, ASTM-B117 Free air operation Gold-plated, corrosion-resistant brass terminal connectors with silicone cap RGB LED compatible with HM RGB 1 BK Technical Specifications Effective diaphragm diameter 210 mm Xmax 12.3 mm Xmech ±16.3 mm Re 2.1 Ohm Fs 43 Hz Le 0.46 mH Vas 30.46 l Mms 75.6 g Cms 0.18 mm/N BL 8.3 Tm Qts 0.60 Qes 0.63 Qms 12.3 Sound pressure level 88.5 dB Dimensions: A 277 mm, B 230 mm, C 191 mm, D 145 mm, F 46 mm Sealed compact enclosure: Volume 50 l, Fb 54 Hz, Qtc 1.05, External dimensions B 440 mm, H 440 mm, T 365 mm, Mounting hole 230 mm, Panel thickness 19 mm Sealed panel cut 50 l: A 440 x 440 mm Quantity 2, B 440 x 327 mm Quantity 2, C 402 x 327 mm Quantity 2 Sealed large enclosure: Volume 71 l, Fb 51 Hz, Qtc 0.99, External dimensions W 460 mm, H 460 mm, D 450 mm, Mounting hole 230 mm, Panel thickness 19 mm Sealed panel cut 71 l: A 460 x 460 mm Quantity 2, B 460 x 412 mm Quantity 2, C 422 x 412 mm Quantity 2
Hertz HMS 10 S4-LD-SW.1 10 inch Subwoofer Masori
1532.5 PLN
The HMS 10 S4-LD-SW.1 from Hertz is a 10-inch Subwoofer designed for marine use with an RMS power handling of 300 watts and a peak power of 600 watts. The construction features a polypropylene diaphragm with UV inhibitors and a high-density flux ferrite magnet. The model has a 50 mm voice coil and is optimized for operation in infinite baffle configurations without a enclosure. A white sport grille with integrated LED lighting is part of the equipment. The physical dimensions include a depth of 116 mm and a component weight of 5.1 kg. The Subwoofer has an impedance of 4.5 ohms and a sound pressure level of 88 dB. Features 10-inch (25 cm) Subwoofer Power handling: 300 watts RMS Power handling: 600 watts Max Polypropylene diaphragm with UV inhibitors High-density flux ferrite magnet White sport grille with integrated LED lighting Operation with infinite baffle possible Xmech: ±19 mm Weight: 5.1 kg Technical Specifications Diameter (D): 210 mm Mounting depth: 116 mm Voice coil diameter: 50 mm Magnet size: 140 x 60 x 30 mm Xmax: 13.5 mm Resonance frequency (Fs): 41 Hz Equivalent volume (Vas): 37 l DC resistance (Re): 4.5 ohms Total quality factor (Qts): 0.71 Electrical quality factor (Qes): 0.76 Mechanical quality factor (Qms): 11 Sound pressure level (Spl): 88 dB Mms: 69 g Cms: 0.22 mm/N BL: 10.2 T*m Inductance (Le): 0.9 mH
Hertz Mille Pro MPBX 250 S2 10 Inch Enclosure Subwoofer
1704.16 PLN
The Hertz Mille Pro MPBX 250 S2 is a 10-inch 25 cm Enclosed Subwoofer with an ultra-flat, robust housing and 15 mm wood thickness. The construction includes internal sound-absorbing materials and braces. The 2S² design allows for down-firing or up-firing installation. Integrated SSP Sub Smart Plug technology. Equipped with a high-density ferrite magnet, polypropylene diaphragm, and a single voice coil with a diameter of 38 mm. Features 10-inch Enclosed Subwoofer Ultra-flat, robust housing Wood thickness 15 mm 2S² design for down-firing or up-firing SSP Sub Smart Plug technology Speaker size 25 cm 250 mm Diaphragm polypropylene Magnet high-density ferrite Voice coil type single Technical Specifications Power handling RMS 500 W Power handling peak 1000 W Impedance 2 Ohm Voice coil Ø 38 mm Frequency response 25 - 400 Hz Xmech 20 mm Magnet size 134 x 55 x 36 mm Depth 118 mm Weight 10.8 kg Size 250 mm 25 cm Dimensions A 531 mm, B 361 mm, C 160 mm, C1 118 mm
Hertz HMS 10 S2-LD-SW.1 10 inch Subwoofer Masori
1532.5 PLN
The Hertz HMS 10 S2-LD-SW.1 is a 10-inch Subwoofer with an RMS power handling of 300 watts and a peak power handling of 600 watts. The diaphragm is made of polypropylene with UV inhibitors, and the impedance is 2 ohms. The device features a high-density flux ferrite magnet and a voice coil with a diameter of 50 mm. The mechanical excursion Xmech is ±16.3 mm. The Subwoofer is designed for use with an infinite baffle without a special enclosure and weighs 5.1 kg. The installation depth is 116 mm. Features 10-inch (25 cm) Subwoofer RMS power handling: 300 watts Peak power handling: 600 watts Impedance: 2 ohms Polypropylene diaphragm with UV inhibitors High-density flux ferrite magnet Removable sport grill with integrated LEDs Optimized for infinite baffle Weight: 5.1 kg Installation depth: 116 mm Technical Specifications Voice coil diameter: 50 mm Magnet size: 140 x 60 x 30 mm Xmech: ±16.3 mm Xmax: 12.3 mm Resonant frequency (Fs): 43 Hz DC resistance (Re): 2.1 ohms Inductance (Le): 0.46 mH Equivalent volume (Vas): 30.46 l Moving mass (Mms): 75.6 g Compliance (Cms): 0.18 mm/N Drive factor (BL): 8.3 T*m Total Q (Qts): 0.60 Electrical Q (Qes): 0.63 Mechanical Q (Qms): 12.3 Efficiency (Spl): 88.5 dB Outer diameter (A): 280 mm Mounting diameter (B): 227 mm Total depth (C): 164 mm Overhang (F): 48 mm Enclosure recommendation Sealed (Compact): 50 l (Vb), 54 Hz (Fb), Qtc 1.05 Enclosure recommendation Sealed (Power): 71 l (Vb), 51 Hz (Fb), Qtc 0.99
Hertz HMS 12 S4-LD-G 12 inch Subwoofer Masori
2042.71 PLN
The HMS 12 S4-LD-G is a 12 inch (30 cm) Subwoofer from Hertz in marine version. Designed for free-air application with single voice coil and 4 Ohm impedance. The RMS power is 500 W, the peak power is 1000 W. The depth is 191 mm, the voice coil diameter is 65.5. The grill features integrated LEDs and is paintable. The drive uses high-density ferrite, the diaphragm is made of polypropylene with UV inhibitors. Electroacoustic parameters include Xmax 19 mm, Fs 30 Hz, Re 3.3 Ohm, Le 0.62 mH, Vas 104.7 l, SPL 89.5 dB, as well as Qts 1, Qes 1.1, and Qms 12.9. The weight is 7.6 kg, and the magnet size measures 156 x 80 x 40 mm. Features 12 inch Subwoofer (30 cm) Marine version Free-Air application Single voice coil Impedance 4 Ohm RMS power 500 W Peak power 1000 W Depth 191 mm Grill with integrated LEDs Grill paintable Diaphragm polypropylene with UV inhibitors Magnet high-density ferrite Magnet size 156 x 80 x 40 mm Voice coil Ø 65.5 Weight 7.6 kg Technical specifications Size 300 mm Xmax 19 mm Re 3.3 Ohm Fs 30 Hz Le 0.62 mH Vas 104.7 l Mms 112 g Cms 0.247 mm/N BL 8 Tm Qts 1 Qes 1.1 Qms 12.9 Sound pressure 89.5 dB A 342.9 mm B 279.4 mm C 192.8 mm D 140.6 mm F 52.2 mm
Hertz HMS 12 S4-LD-SW 12 inch Subwoofer Masori
2042.71 PLN
HMS 12 S4-LD-SW is a 12 inch (30 cm) Subwoofer from Hertz in marine version with 4 Ohm single voice coil and a power handling of 500 W RMS as well as 1000 W Peak. The driver is designed for use with open baffle and utilizes a high-performance motor and suspension design. The linear excursion is 19 mm, the resonance frequency is 30 Hz, and the sound pressure level is 89.5 dB. The diaphragm is made of polypropylene with UV inhibitors, the magnet is high-density ferrite, and the voice coil has a diameter of 65.5 mm. An adaptable sport grill with integrated LEDs is included. The mounting depth is 191 mm, the magnet size is 156 x 80 x 40 mm, and the weight is 7.6 kg. Features 12 inch (30 cm) Subwoofer Marine version Single voice coil Impedance 4 Ohm Power handling RMS 500 W Power handling Peak 1000 W Designed for open baffle Sport grill with integrated LEDs High-performance motor and suspension design Diaphragm polypropylene with UV inhibitors Magnet high-density ferrite Voice coil Ø 65.5 mm Mounting depth 191 mm Weight 7.6 kg Technical specifications Size 300 mm Effective diameter (D) 300 mm Xmax 19 mm DC resistance (Re) 3.3 Ohm Resonance frequency (Fs) 30 Hz Inductance (Le) 0.62 mH Equivalent volume (Vas) 104.7 l Moving mass (Mms) 112 g Compliance (Cms) 0.247 mm/N Force factor (BL) 8 T*m Qts 1 Qes 1.1 Qms 12.9 Sound pressure level 89.5 dB Magnet size (W x D x H) 156 x 80 x 40 mm Dimension A 342.9 mm Dimension B 279.4 mm Dimension C 192.8 mm Dimension D 140.6 mm Dimension F 52.2 mm
Hertz Mille Pro MPS 300 S4 / S2 12 Inch Subwoofer
1702.79 PLN
Hertz Mille Pro MPS 300 S4 / S2 is a 12 inch (30 cm) Subwoofer with 500 W RMS and 1000 W Peak. The design is optimized for extremely compact, sealed enclosures. The membrane excursion capacity is 20% higher than conventional designs. Installation depth 88 mm, impedance 4 Ohm, voice coil type S2 / S4 and voice coil Ø 38 mm. Frequency response 25–400 Hz, magnet made of high-density ferrite, membrane made of polypropylene. Other specifications include Xmech 20 mm, Xmax 16.8 mm, Fs 23 Hz, and a weight of 6.64 kg. Features 12 inch (30 cm) Subwoofer Manufacturer: Hertz RMS power 500 W Peak power 1000 W Impedance 4 Ohm Voice coil type S2 / S4 Voice coil Ø 38 mm Installation depth 88 mm Outer diameter 318.3 mm Cutout opening 282.5 mm Weight 6.64 kg Frequency response 25–400 Hz Membrane polypropylene Magnet flux ferrite with high density Optimized for extremely compact, sealed enclosures Membrane excursion capacity increased by 20% Technical data Size 300 mm Magnet size 156 x 60 x 36 mm Xmech 20 mm Electro-acoustic specifications: D 262.59 mm Electro-acoustic specifications: Xmax 16.8 mm Electro-acoustic specifications: Re 3.4 Ohm Electro-acoustic specifications: Fs 23 Hz Electro-acoustic specifications: Le 3.75 mH Electro-acoustic specifications: Vas 62.13 liters Electro-acoustic specifications: Mms 320 g Electro-acoustic specifications: Cms 0.15 mm/N Electro-acoustic specifications: BL 18.7 T·m Electro-acoustic specifications: Qts 0.42 Electro-acoustic specifications: Qes 0.45 Electro-acoustic specifications: Qms 6.3 Electro-acoustic specifications: Sound pressure 85 dB Physical specifications: A 318.3 mm Physical specifications: B 282.5 mm Physical specifications: C 108.8 mm Physical specifications: D 88 mm Physical specifications: E 291.8 mm Physical specifications: F 42.6 mm Sealed Box: Enclosure volume 22.7 liters Sealed Box: Fb 45 Hz Sealed Box: Qtc 0.78 Sealed Box: External dimensions B x H x T 510 x 406 x 160 mm Sealed Box: Mounting hole 283 mm Sealed Box: Wood thickness 16 mm Cutting list (sealed): A mm 510 x 406 cm Quantity 2 Cutting list (sealed): B mm 510 x 128 cm Quantity 2 Cutting list (sealed): C mm 374 x 128 cm Quantity 2 Reflex Box: Enclosure volume 36.8 liters Reflex Box: Fb 33 Hz Reflex Box: B 713 mm Reflex Box: H 372 mm Reflex Box: T 130 mm Reflex Box: Z 146 mm Reflex Box: P 133 mm Reflex Box: S 60 mm Reflex Box: Mounting hole 283 mm Reflex Box: Wood thickness 16 mm Cutting list (reflex): A mm 836 x 422 cm Quantity 2 Cutting list (reflex): B mm 836 x 133 cm Quantity 2 Cutting list (reflex): C mm 390 x 133 cm Quantity 1 Cutting list (reflex): D mm 330 x 133 cm Quantity 1 Cutting list (reflex): E mm 444 x 133 cm Quantity 1
Hertz Mille Pro MPS 300 S4 / S2 12 Inch Subwoofer
1702.79 PLN
Hertz Mille Pro MPS 300 S4 / S2 is a 12 inch (30 cm) Subwoofer with 500 W RMS and 1000 W Peak. The design is optimized for extremely compact, sealed enclosures. The membrane excursion capacity is 20% higher than conventional designs. Installation depth 88 mm, impedance 4 Ohm, voice coil type S2 / S4 and voice coil Ø 38 mm. Frequency response 25–400 Hz, magnet made of high-density ferrite, membrane made of polypropylene. Other specifications include Xmech 20 mm, Xmax 16.8 mm, Fs 23 Hz, and a weight of 6.64 kg. Features 12 inch (30 cm) Subwoofer Manufacturer: Hertz RMS power 500 W Peak power 1000 W Impedance 4 Ohm Voice coil type S2 / S4 Voice coil Ø 38 mm Installation depth 88 mm Outer diameter 318.3 mm Cutout opening 282.5 mm Weight 6.64 kg Frequency response 25–400 Hz Membrane polypropylene Magnet flux ferrite with high density Optimized for extremely compact, sealed enclosures Membrane excursion capacity increased by 20% Technical data Size 300 mm Magnet size 156 x 60 x 36 mm Xmech 20 mm Electro-acoustic specifications: D 262.59 mm Electro-acoustic specifications: Xmax 16.8 mm Electro-acoustic specifications: Re 3.4 Ohm Electro-acoustic specifications: Fs 23 Hz Electro-acoustic specifications: Le 3.75 mH Electro-acoustic specifications: Vas 62.13 liters Electro-acoustic specifications: Mms 320 g Electro-acoustic specifications: Cms 0.15 mm/N Electro-acoustic specifications: BL 18.7 T·m Electro-acoustic specifications: Qts 0.42 Electro-acoustic specifications: Qes 0.45 Electro-acoustic specifications: Qms 6.3 Electro-acoustic specifications: Sound pressure 85 dB Physical specifications: A 318.3 mm Physical specifications: B 282.5 mm Physical specifications: C 108.8 mm Physical specifications: D 88 mm Physical specifications: E 291.8 mm Physical specifications: F 42.6 mm Sealed Box: Enclosure volume 22.7 liters Sealed Box: Fb 45 Hz Sealed Box: Qtc 0.78 Sealed Box: External dimensions B x H x T 510 x 406 x 160 mm Sealed Box: Mounting hole 283 mm Sealed Box: Wood thickness 16 mm Cutting list (sealed): A mm 510 x 406 cm Quantity 2 Cutting list (sealed): B mm 510 x 128 cm Quantity 2 Cutting list (sealed): C mm 374 x 128 cm Quantity 2 Reflex Box: Enclosure volume 36.8 liters Reflex Box: Fb 33 Hz Reflex Box: B 713 mm Reflex Box: H 372 mm Reflex Box: T 130 mm Reflex Box: Z 146 mm Reflex Box: P 133 mm Reflex Box: S 60 mm Reflex Box: Mounting hole 283 mm Reflex Box: Wood thickness 16 mm Cutting list (reflex): A mm 836 x 422 cm Quantity 2 Cutting list (reflex): B mm 836 x 133 cm Quantity 2 Cutting list (reflex): C mm 390 x 133 cm Quantity 1 Cutting list (reflex): D mm 330 x 133 cm Quantity 1 Cutting list (reflex): E mm 444 x 133 cm Quantity 1
Hertz HMS 12 S2-LD-SW 12 inch Subwoofer Masori
2042.71 PLN
Hertz HMS 12 S2-LD-SW is a 12 inch (30 cm) Subwoofer with a diameter of 300 mm and a depth of 191 mm. RMS power 500 W and peak power 1000 W. 2 Ohm impedance with single voice coil and voice coil Ø 65.5. Sport grill design with built-in LEDs. Magnet made of high-density ferrite, diaphragm made of polypropylene with UV inhibitors. Xmax 19 mm, resonance frequency Fs 30 Hz, and sound pressure 89.5 dB. Designed for open baffle. Weight 7.6 kg. Features 12 inch (30 cm) Subwoofer RMS power 500 W Peak power 1000 W Impedance 2 Ohm Single voice coil Voice coil Ø 65.5 Sport grill design with LEDs Magnet high-density ferrite Diaphragm polypropylene with UV inhibitors Diameter 300 mm Depth 191 mm Designed for open baffle Weight 7.6 kg Technical specifications D 300 mm Xmax 19 mm Re 1.8 Ohm Fs 30 Hz Le 0.41 mH Vas 95.4 l Mms 114 g Cms 0.225 mm/N BL 8 T·m Qts 1 Qes 1.1 Qms 11.1 SPL 89.5 dB Magnet size B x T x H 156 x 80 x 40 mm A 342.9 mm B 279.4 mm C 192.8 mm D 140.6 mm F 52.2 mm
Ground Zero Iridium GZIB 3.250SPL 10 inch enclosure subwoofer
2348.47 PLN
The Iridium GZIB 3.250SPL is a 10-inch Enclosed Subwoofer from Ground Zero. The bass reflex enclosure integrates 3x 25 cm SPL Subwoofers of the type GZIW 10XSPL with a front bass reflex tunnel. The construction includes a wooden enclosure and a clamp connection. The voice coil measures 50 mm made of copper, the diaphragm uses reinforced paper with a honeycomb structure, and the maximum displacement (Xmax) is 34 mm. The connection impedance is 1.4 Ohm and the net volume is 60 l. An amplifier power of 2000 watts at 1 Ohm is recommended. The dimensions are 83 x 34 x 32 / 24 cm (W x H x D1/D2). Features 10-inch Enclosed Subwoofer Bass reflex enclosure with 3x 25 cm SPL Subwoofers Front bass reflex tunnel Wooden enclosure Clamp connection Recommended amplifier power 2000 watts at 1 Ohm Net volume 60 l Dimensions (W x H x D1/D2) 83 x 34 x 32 / 24 cm Technical Specifications Subwoofer 3x GZIW 10XSPL Voice coil 50 mm copper Diaphragm reinforced paper with honeycomb structure Max. displacement (Xmax) 34 mm SPL power 2100 watts RMS 1500 watts Connection impedance 1.4 Ohm
Hertz HMS 12 S2-LD-G 12 inch Subwoofer Masori
2042.71 PLN
HMS 12 S2-LD-G is a 12 inch (30 cm) Subwoofer from Hertz. It is optimized for Free Air applications and requires no special enclosure. The single voice coil with 2 Ohm impedance is designed for 500 W RMS and 1000 W Peak. The cone is made of polypropylene with UV inhibitors, and the drive uses a high-density ferrite magnet. An integrated, paintable grille with LED lights is included. Technical specifications include a 30 Hz resonance frequency, 19 mm Xmax, and 89.5 dB sound pressure. A motor and suspension design for high-performance operation is integrated. Features 12 inch (30 cm) Subwoofer Free Air optimized No special enclosure required Single voice coil Impedance 2 Ohm RMS power 500 W Peak power 1000 W Integrated grille with LED lights Paintable grille Polypropylene cone with UV inhibitors High-density ferrite magnet Motor and suspension design for high-performance operation Marine version Technical specifications Size 300 mm Depth 191 mm Voice coil diameter 65.5 mm Magnet size 156 x 80 x 40 mm Weight 7.6 kg Resonance frequency Fs 30 Hz Voice coil resistance Re 1.8 Ohm Inductance Le 0.41 mH Xmax 19 mm Vas 95.4 liters Mms 114 g Cms 0.225 mm/N BL 8 T·m Qts 1 Qes 1.1 Qms 11.1 Sound pressure 89.5 dB A 342.9 mm B 279.4 mm C 192.8 mm D 140.6 mm F 52.2 mm
Hertz Dieci DS 25.3 10 inch Subwoofer Masori
385.56 PLN
The Hertz Dieci DS 25.3 is a 10 inch Subwoofer with a continuous power handling of 150 watts RMS and a peak power of 600 watts maximum. It is equipped with a polypropylene cone with mica additive and a butyl rubber surround. The model has a 4 Ohm impedance and a voice coil with a diameter of 38 mm. Cooling is achieved through a specific structure for heat dissipation. The enclosure design is optimized for use in compact closed enclosures or reflex enclosures. A ferrite magnet with high flux density drives the system. Features 10 inch (25 cm) Subwoofer Power: 150 watts RMS Power: 600 watts maximum Impedance: 4 Ohm Cone: Polypropylene with mica additive Surround: Butyl rubber Magnet: Ferrite with high flux density Voice coil: 38 mm diameter Enclosure suitability: Closed and reflex Dimension A: 345 mm Dimension B: 245 mm Dimension C: 79 mm Technical specifications Frequency response: 32 - 400 Hz Magnet size: 100 x 50 x 25 mm Weight: 3 kg Xmech: 16 mm Diameter D: 215 mm Xmax: 9 mm Re: 3.3 Ohm Fs: 36 Hz Le: 2.15 mH Vas: 34 liters Mms: 106 g Cms: 0.18 mm/N BL: 8.5 T*m Qts: 0.92 Qes: 1.13 Qms: 5 SPL: 89 dB
Audison Prima APS 10 S4S 10 Inch Subwoofer Masori
895.76 PLN
The Audison Prima APS 10 S4S is a 10-inch (25 cm) Subwoofer with a single 4-ohm voice coil. The design features an ultra-flat profile of 120 mm and is intended for sealed enclosures starting from 10 liters. The power handling is 400 W continuous and 800 W peak. The magnetic system uses High Density Flux Ferrite, and the voice coil measures 60 mm in diameter. The water-resistant treated, pressed paper cone and the cone dust cap basket geometry were developed using FEM and optimized with the Klippel Scan Vibrometer. Xmax is 12.6 mm, Xmech is 18 mm, Fs is 28.5 Hz, Vas is 39.62 liters, and Qts is 0.68. D 220 mm, dimensions A 270 mm, B 233 mm, C 105 mm, and D 88 mm, weight 5.24 kg. Includes steel grille and plastic gasket; basket with venting openings below the spider. Single voice coil design for combination with AP F8.9 Bit (2 CH, bridged, 260 Watts RMS). Features 10-inch (25 cm) Subwoofer Single voice coil 4 Ohm Ultra-flat profile 120 mm Optimized for sealed enclosures starting from 10 liters Water-resistant treated, pressed paper cone High Density Flux Ferrite magnetic system Basket with venting openings below the spider Cone dust cap basket geometry, FEM developed and optimized with Klippel Massive motor assembly, FEM optimized Includes steel grille and plastic gasket Single voice coil design for combination with AP F8.9 Bit (2 CH, bridged, 260 Watts RMS) Technical Specifications Size 250 mm Power handling peak 800 W Power handling continuous 400 W Impedance 4 Ohm Voice coil Ø 60 mm Cone material water-resistant treated, pressed paper Magnet material High Density Flux Ferrite Xmax 12.6 mm Xmech 18 mm D 220 mm Re 3.7 Ohm Fs 28.5 Hz Vas 39.62 liters Mms 160 g Cms 0.2 mm/N BL 12.9 T·m Qms 6.9 Qes 0.75 Qts 0.68 Le Standard 1.9 mH Spl 83.5 dB Driver displacement volume 1.12 Weight 5.24 kg Dimension A 270 mm Dimension B 233 mm Dimension C 105 mm Dimension D 88 mm
Hifonics Titan TS-250R 10 Inch Enclosure Subwoofer Masori
508.41 PLN
The Hifonics Titan TS-250R is a 10-inch (25 cm) Enclosed Subwoofer as a single bass reflex system. The enclosure is made entirely of MDF with internal bracing. The woofer uses a reinforced injection-PP diaphragm and a voice coil. Chrome brackets and a front panel finished in a carbon look, with upholstery embroidered with the Hifonics logo. Power 300 W RMS and 600 W Max at 4 Ohm impedance. Dimensions 40 x 32 x 36/28 cm. Features 10-inch (25 cm) Enclosed Subwoofer Single bass reflex system MDF enclosure Internal bracing Reinforced injection-PP diaphragm Voice coil Chrome brackets Front panel in carbon look Upholstery embroidered with Hifonics logo Technical Specifications RMS power 300 W Max power 600 W Impedance 4 Ohm Dimensions 40 x 32 x 36/28 cm
Hifonics Titan TD-250R 10 Inch Enclosure Subwoofer Masori
894.17 PLN
Hifonics Titan TD-250R as a 10 inch (25 cm) Enclosed Subwoofer. MDF construction with internal bracing. A powerful voice coil drives the reinforced Injection-PP diaphragm. Chrome grille for protection. Front panel in carbon look, cover embroidered with Hifonics logo. Rated at 600 W RMS and 1200 W Max, impedance 4 + 4 Ohm. System specification 2 x 25 cm (10 inch) dual bandpass, dimensions 77 x 32 x 36/28 cm. Features 10 inch (25 cm) Enclosed Subwoofer 2 x 25 cm (10 inch) dual bandpass system MDF enclosure Internal bracing Reinforced Injection-PP diaphragm Powerful voice coil Chrome grille Front panel in carbon look foil Cover embroidered with Hifonics logo Technical Specifications RMS power: 600 W Max power: 1200 W Impedance: 4 + 4 Ohm Dimensions: 770 x 320 x 360/280 mm
Hifonics ZXE10S4 10 Inch Subwoofer Masori
311.49 PLN
The Hifonics ZXE10S4 is a 10-inch (25 cm) Subwoofer with 4 Ohm, 250 W RMS, and 500 W Max. The drive is based on Y35 magnets and a 64 mm voice coil; the magnet drive weighs 1.14 kg. Pole core drillings and a patented bumped T-Plates design complement the construction. Double-stitched surround, handcrafted and coated paper cone, as well as a robust steel basket are integrated. A blue magnet protector is present. The dimensions are Ø 238 mm and ‡ 120 mm. Features 10-inch Subwoofer Y35 magnet drive 64 mm voice coil X-Max +/- 16 mm Double-stitched surround Handcrafted, coated paper cone Robust steel basket Blue magnet protector Pole core drillings Patented bumped T-Plates design Technical Specifications 25 cm (10 inches) 4 Ohm 250 W RMS 500 W Max Magnet drive 1.14 kg Ø 238 mm ‡ 120 mm
Hertz HMS 10 B-2 10 inch Subwoofer Masori
895.71 PLN
Hertz HMS 10 B-2 is a 10-inch (25 cm) marine Subwoofer with 2 Ohm impedance, 250 W RMS, and 500 W peak. It features a single voice coil with a diameter of 50 mm, a ferrite magnet measuring 140 x 60 x 30 mm, and an injection-molded polymer basket made for marine use. The polypropylene diaphragm with UV inhibitors is complemented by a combined Santoprene surround and an advanced aramid fiber spider with silicone-insulated connection wires. Gold-plated, corrosion-resistant brass terminal connectors with silicone caps are integrated. Resistance to UV radiation, salt mist, vibrations, splashes, temperature shock, and dust is provided. The depth is 191 mm, the weight is 5.1 kg, Xmax is 12.3 mm, and Xmech is ±16.3 mm. The rated sound pressure is 88.5 dB, and the resonance frequency is 43 Hz. Features 10-inch (25 cm) Subwoofer Impedance 2 Ohm Power handling RMS 250 W Power handling peak 500 W Single voice coil Voice coil Ø 50 mm Depth 191 mm Weight 5.1 kg Magnet ferrite Magnet size 140 x 60 x 30 mm Polypropylene diaphragm with UV inhibitors Santoprene surround Aramid fiber spider with silicone-insulated connection wires Injection-molded polymer basket made for marine use Gold-plated, corrosion-resistant brass terminal connectors with silicone caps Resistance to UV, salt mist, vibrations, splashes, temperature shock, dust Technical Specifications Size 250 mm Xmax 12.3 mm Xmech ±16.3 mm Re 2.1 Ohm Fs 43 Hz Le 0.46 mH Vas 30.46 l Mms 75.6 g Cms 0.18 mm/N Bl 8.3 T*m Qts 0.6 Qes 0.63 Qms 12.3 Rated sound pressure 88.5 dB D 210 mm Physical specifications: A 277 mm, B 230 mm, C 191 mm, D 145 mm, F 46 mm Enclosure data – Sealed box (Compact): Vb 50 l, Fb 54 Hz, Qtc 1.05, W 440 mm, H 440 mm, D 365 mm, Mounting hole M 230 mm, Wood thickness 19 mm Panel cut – Sealed box (Compact): A 440 x 440 mm Quantity 2 Panel cut – Sealed box (Compact): B 440 x 327 mm Quantity 2 Panel cut – Sealed box (Compact): C 402 x 327 mm Quantity 2 Enclosure data – Sealed box: Vb 71 l, Fb 51 Hz, Qtc 0.99, W 460 mm, H 460 mm, D 450 mm, Mounting hole M 230 mm, Wood thickness 19 mm Panel cut – Sealed box: A 460 x 460 mm Quantity 2 Panel cut – Sealed box: B 460 x 412 mm Quantity 2 Panel cut – Sealed box: C 422 x 412 mm Quantity 2
Hertz Cento CK 165 L 6.5 inch speaker set Masori
767.03 PLN
The Hertz Cento CK 165 L is a 6.5-inch (16.5 cm) Speaker Set with a passive 2-way crossover. It includes the C 26 Tweeter with a 26 mm Tetolon diaphragm and a 20 mm voice coil, as well as the CK 165 L mid-bass driver with a non-pressed paper diaphragm, a 25 mm voice coil on an aluminum carrier, and a neodymium magnet with low-carbon pole plates. The CCX 2T and CCX 2W crossovers are separate and ultra-compact, and the high-frequency level is adjustable in three steps. Performance data: 100 W RMS, 300 W Peak, 4 Ohm impedance, sensitivity of the Tweeter 92 dB and the mid-bass driver 91 dB, frequency response 50 to 22.5 kHz. The filters operate at 3.8 kHz with 6 dB/Oct (LP) and 12 dB/Oct (HP). Additional features include FEM-optimized faceplate geometry, a compact 3-spoke chassis with rubber protection for the magnet, and a metal Speaker Grille in a plastic frame. Features 6.5-inch (16.5 cm) Speaker Set RMS power 100 W Peak power 300 W Impedance 4 Ohm Frequency response 50–22.5 kHz Sensitivity of Tweeter 92 dB SPL Sensitivity of mid-bass driver 91 dB SPL C 26 Tweeter with 26 mm Tetolon diaphragm Tweeter voice coil 20 mm Neodymium magnet on the Tweeter FEM-optimized faceplate geometry Installation accessories CK 165 L mid-bass driver with non-pressed paper diaphragm Mid-bass driver voice coil 25 mm on aluminum carrier Neodymium magnet with low-carbon pole plates on the mid-bass driver Compact 3-spoke basket, rubber protection for the magnet Metal Speaker Grille with plastic frame Separate, ultra-compact crossovers CCX 2T and CCX 2W High-frequency level adjustable in three steps (-2, 0, +2 dB) Low-loss components, pure copper coils Passive 2-way crossover design Technical Specifications Crossover filter: LP 6 dB/Oct at 3.8 kHz, HP 12 dB/Oct at 3.8 kHz Tweeter diaphragm 26 mm Tweeter voice coil Ø 20 mm Mid-bass driver voice coil Ø 25 mm D 131.5 mm Re 3.2 Ohm Fs 60 Hz Le 0.23 mH Vas 13.66 l Mms 14.2 g Cms 0.52 mm/N BL 4.9 Tm Qts 0.60 Qes 0.70 Qms 3.8 SPL 91 dB Weight of Tweeter 0.037 kg Weight of crossover 0.037 kg
Hertz Cento Pro CPX 690 6x9 inch speaker set Masori
894.57 PLN
Hertz Cento Pro CPX 690 is a 6 x 9 inch speaker set in a 3-way design. It combines Neodymium tweeter and Neodymium super tweeter with Tetolon domes, as well as a water-repellent pressed paper membrane and a wide rubber surround. The woofer uses a ferrite magnet and a 30 mm voice coil; the tweeter features a 28 mm voice coil and a 32 mm tweeter membrane. The metal basket relies on a radial venting system; the front plate geometry is FEM-optimized. The load capacity is 120 W RMS and 360 W peak at 4 Ohm impedance, with a frequency response ranging from 35 to 24,000 Hz. An ABS plastic frame with a metal surface and protective metal grille is integrated. Xmech is 7.5 mm, and the weight is 1.63 kg. Features 6 x 9 inch speaker set 3-way design Neodymium tweeter and Neodymium super tweeter with Tetolon domes Water-repellent pressed paper membrane Width rubber surround Metal basket with radial venting system FEM-optimized geometry of membrane and front plate Ferrite magnet and low-carbon pole plates on the woofer Vibration-damping rubber magnet cover on the basket ABS plastic frame with metal surface and protective metal grille RMS power 120 W Peak power 360 W Impedance 4 Ohm Frequency response 35 - 24,000 Hz Technical specifications Size 6 x 9 inches RMS power 120 W Peak power 360 W Impedance 4 Ohm Frequency response 35 - 24,000 Hz Tweeter membrane 32 mm Woofer voice coil Ø 30 mm Tweeter voice coil Ø 28 mm Woofer magnet size 90 x 40 x 20 mm Tweeter magnet size 27.8 x 3 mm Woofer magnet Ferrite Tweeter magnet Neodymium Membrane water-repellent pressed paper Dome material Tetolon Xmech 7.5 mm Weight 1.63 kg D 172 mm Re 3.4 Ohm Fs 68 Hz Le 0.53 mH Vas 15.8 liters Mms 26.5 g Cms 0.21 mm/N BL 6.0 Tm Qts 0.77 Qes 1.10 Qms 2.7 Sound pressure level 94 dB A 237.5 mm B 225 mm C 103 mm D 85 mm E 269 mm F 28.5 mm
Hertz Cento CX 690 6x9 inch speaker set Masori
597.35 PLN
Cento CX 690 is a 6 x 9 inch speaker set from Hertz as an oval 3-way coaxial speaker with 4 Ohm, 100 W RMS, and 300 W peak. The construction includes an SPP-M diaphragm made of semi-pressed paper with mica and mica powder, as well as a wide rubber surround. The high-frequency system consists of a 40 mm tweeter and a 20 mm super tweeter with a neodymium magnet. The tweeter faceplate has been optimized with FEM simulations. The basket has a metallic finish and rubber magnet protection. A speaker grille made of ABS plastic with metallic finish and metal grille is provided. Frequency response 40 Hz to 23 kHz, efficiency 93.5 dB, Xmech 5.5 mm, and weight per speaker 1.55 kg. Additional specifications include a 30 mm woofer voice coil, a 28 mm tweeter voice coil, and magnet dimensions of 100 x 32 x 15 mm for the woofer and 19 x 3 mm for the tweeter. Features 6 x 9 inch speaker set Oval 3-way coaxial speaker Designed for horizontal installation position SPP-M diaphragm made of semi-pressed paper with mica, enhanced with mica powder Width rubber surround Woofer magnet ferrite with high density, low-carbon pole plates Basket with metallic finish and rubber magnet protection Tweeter faceplate design FEM-optimized Speaker grille made of ABS plastic with metallic finish and metal grille Tweeter 40 mm Super tweeter 20 mm Impedance 4 Ohm RMS power 100 W Peak power 300 W Frequency response 40 Hz – 23 kHz Weight per speaker 1.55 kg Technical specifications Tweeter diaphragm 40 mm Woofer voice coil Ø 30 mm Tweeter voice coil Ø 28 mm Woofer magnet size 100 x 32 x 15 mm Tweeter magnet size 19 x 3 mm Effective diameter D 139 mm Re 3.3 Ohm Fs 70 Hz Le 0.2 mH Vas 11.1 l Mms 13 g Cms 0.34 mm/N BL 4.9 T·m Qts 0.67 Qes 0.83 Qms 3.3 Sound pressure 93.5 dB Xmech 5.5 mm A 238 mm B 224 mm C 95 mm D 78.5 mm And 268 mm F 29 mm Woofer magnet ferrite with high density Tweeter magnet neodymium Diaphragm semi-pressed paper + mica
Hertz Cento CK 130 5 Inch Speaker Set Masori
724.6 PLN
The Cento CK 130 is a 5 Inch (13 cm) Speaker Set from Hertz in a 2-way design with a passive 2-way crossover and a crossover frequency of 2.5 kHz at 12 dB/Oct. A Tetolon tweeter with a 26 mm diaphragm and 20 mm voice coil combines with a 130 mm mid-woofer with a 25 mm voice coil. The impedance is 4 Ohm, the sensitivity is 92.5 dB SPL, and the frequency response ranges from 65 Hz to 22.5 kHz. The power handling is 70 W RMS and 210 W Peak. An oversized ferrite magnet, ultra-compact crossovers, and a durable speaker grille are integrated. Features 5 Inch (13 cm) Speaker Set 2-Way System Passive 2-Way Crossover Crossover Frequency 2.5 kHz, 12 dB/Oct Tetolon Tweeter Mid-Woofer Oversized Ferrite Magnet Ultra-Compact Crossovers Durable Speaker Grille Size 130 mm Tweeter Diaphragm 26 mm Woofer Voice Coil 25 mm Tweeter Voice Coil 20 mm Impedance 4 Ohm Sensitivity 92.5 dB SPL Frequency Response 65 Hz – 22.5 kHz RMS Power 70 W Peak Power 210 W Technical Data D 110 mm Re 3.1 Ohm Fs 80 Hz Le 0.17 mH Vas 6.30 l Mms 8 g Cms 0.50 mm/N BL 4.1 T·m Qts 0.61 Qes 0.72 Qms 3.9 Weight Woofer 0.7 kg Weight Tweeter 0.03 kg Weight Crossover 0.185 kg
Hertz Cento CX 130 5 Inch Coaxial Speakers Masori
401.41 PLN
Hertz Cento CX 130 is a 5 inch (13 cm) coaxial speaker with a 2-way design and 130 mm nominal size. Equipped with a 24 mm soft Tetolon tweeter with ferrofluid cooling and RHFC Rotary High Frequency Contour for alignment. The tweeter front plate is optimized through FEM simulation. The woofer uses a 25 mm voice coil on an aluminum carrier and a 130 mm SPP-M membrane made of semi-pressed paper with mica. A high-density ferrite magnet with low-carbon pole plates and a compact 3-spoke basket with rubber magnet protection are integrated. Nominal load capacity 50 W RMS, peak load capacity 150 W, impedance 4 Ohm. Frequency response 65–22,000 Hz, weight per speaker 0.73 kg, Xmech 3.8 mm, tweeter with neodymium magnet. Features 5 inch (13 cm) coaxial speaker 2-way coaxial system 24 mm Soft Tetolon Tweeter, ferrofluid-cooled RHFC Rotary High Frequency Contour Tweeter, adjustable FEM-optimized Tweeter Faceplate 25 mm voice coil on the woofer on aluminum carrier 130 mm SPP-M membrane made of semi-pressed paper with mica High-density ferrite magnet with low-carbon pole plates on the woofer Neodymium Tweeter Magnet Compact 3-spoke basket with rubber magnet protection Speaker Grille made of ABS with metallic finish and metal grille Technical Data Size: 130 mm RMS Power: 50 W Peak Power: 150 W Impedance: 4 Ohm Woofer Voice Coil: 25 mm Ø Tweeter Voice Coil: 13 mm Ø Frequency Response: 65–22,000 Hz Tweeter Magnet Size B x H: 13 x 2 mm Weight per Speaker: 0.73 kg Xmech: 3.8 mm Effective Diameter D: 110 mm Re: 3.1 Ohm Fs: 80 Hz Le: 0.18 mH Vas: 13.5 l Mms: 7.6 g Cms: 0.50 mm/N BL: 4.2 T·m Qts: 0.56 Qes: 0.67 Qms: 3.5 Sound Pressure: 92.5 dB Dimension A: 130 mm Dimension B: 119 mm Dimension C: 65.5 mm Dimension D: 156 mm Dimension E: 156 mm Dimension F: 21 mm
Hertz Cento CK 165 F 6.5 inch speaker set Masori
767.22 PLN
Hertz Cento CK 165 F is a 16.5 cm Speaker Set with C 26 Tweeter (26 mm Tetolon diaphragm, 20 mm voice coil) and flat CK 165 F mid-bass driver. The nominal power handling is 90 W RMS, the peak power handling is 270 W, and the impedance is 4 Ohms. The frequency response is 65–22.5 kHz with a sensitivity of 93 dB. The C 26 uses a neodymium magnet and a FEM-optimized faceplate geometry. The CK 165 F features a flat installation profile, a semi-pressed paper diaphragm with mica powder, a neodymium magnet, and low-carbon pole plates, as well as a pure copper voice coil on an aluminum former. The passive Crossover CCX 2 is ultra-compact, with high-frequency level adjustable in two steps (0, +3 dB), low-loss capacitors, pure copper coils, and ventilation slots. A metal Speaker Grille in a plastic frame is included. The crossover frequency of the filter is at 2.5 kHz with 12 dB/octave. Features 16.5 cm Speaker Set C 26 Tweeter with 26 mm Tetolon diaphragm and 20 mm voice coil Neodymium magnet on the tweeter Tweeter faceplate geometry optimized with FEM CK 165 F mid-bass driver with flat installation profile Semi-pressed paper diaphragm with mica powder Neodymium magnet and low-carbon pole plates on the mid-bass driver Pure copper voice coil on aluminum former (mid-bass driver) Ultra-compact passive Crossover CCX 2 High-frequency level adjustable: 0, +3 dB Low-loss capacitors and copper coils (crossover) Ventilation slots on the crossover Metal Speaker Grille in a plastic frame Slim basket with reduced depth Technical Specifications Size: 165 mm Power handling RMS: 90 W Power handling Peak: 270 W Impedance: 4 Ohms Sensitivity: 93 dB Frequency response: 65–22.5 kHz Crossover frequency: 2.5 kHz at 12 dB/oct. Crossover type: passive 2-way crossover Tweeter diaphragm: 26 mm Tweeter voice coil: 20 mm Mid-bass driver voice coil: 25 mm Weight of woofer: 0.72 kg Weight of tweeter: 0.03 kg Weight of crossover: 0.185 kg D: 134 mm Re: 2.7 Ohms Fs: 80 Hz Le: 0.154 mH Vas: 9.40 l Mms: 12 g Cms: 0.33 mm/N BL: 3.9 Tm Qts: 0.80 Qes: 1.00 Qms: 3.4 Spl: 93 dB
Hertz Cento CK 165 6.5 inch speaker set Masori
767.06 PLN
The Cento CK 165 is a 6.5-inch (16.5 cm) Speaker Set from Hertz featuring the C 26 Tweeter with a 26 mm Tetolon diaphragm and a 20 mm voice coil, as well as the C 165 mid-bass driver with a 165 mm SPP-M semi-pressed paper diaphragm with mica. The Tweeter uses a neodymium magnet with high magnetic flux and a FEM-optimized front plate. The mid-bass driver has a 25 mm voice coil aluminum former, a flux ferrite magnet, and a compact three-spoke basket with a rubber magnet cover. The passive 2-way Crossover CCX 2 separates at 2.5 kHz with 12 dB/oct. and offers a three-position switch for the Tweeter level at 0 and +3 dB. The nominal power handling is 95 W RMS, the peak power handling is 285 W, the impedance is 4 Ohms, the sensitivity is 93 dB SPL, and the frequency response is 55 Hz to 22.5 kHz. Speaker Grilles are included. Features 6.5-inch (16.5 cm) Speaker Set Passive 2-way system with CCX 2 Crossover Tweeter C 26: 26 mm Tetolon dome, 20 mm voice coil Neodymium magnet on the Tweeter with high magnetic flux FEM-optimized Tweeter front plate Mid-bass driver C 165: 165 mm SPP-M semi-pressed paper diaphragm with mica Flux ferrite magnet on the mid-bass driver 25 mm voice coil with aluminum former on the mid-bass driver Compact three-spoke basket, acoustically combined with rubber magnet cover ABS Speaker Grille with metallic finish and protective metal grille CCX 2: Three-position switch for Tweeter level 0, +3 dB CCX 2: Capacitors with low loss factor and low-resistance inductors made of pure copper CCX 2: Compact design with metallic finish and ventilation slots Accessories for integration into OEM placements Speaker Grille included Technical Specifications Nominal power handling RMS 95 W Peak power handling 285 W Impedance 4 Ohms Sensitivity 93 dB SPL Frequency response 55 Hz – 22.5 kHz Crossover frequency 2.5 kHz @ 12 dB/oct. Crossover type Passive, 2-way Size 165 mm Tweeter diaphragm 26 mm Tweeter voice coil Ø 20 mm Mid-bass driver voice coil Ø 25 mm D 131.5 mm Re 3.2 Ohms Fs 60 Hz Le 0.2 mH Vas 13.24 l Mms 13.9 g Cms 0.51 mm/N BL 4.9 T·m Qts 0.59 Qes 0.69 Qms 3.9 Weight of mid-bass driver 0.96 Weight of Tweeter 0.03 kg Weight of Crossover 0.185 kg
Hertz Mille Legend ML 2500.3 10 inch Subwoofer Masori
3103.96 PLN
Hertz Mille Legend ML 2500.3 is a 10 inch (25 cm) Subwoofer with 4 Ohm. The RMS power is 700 W. The peak power is 1400 W. The frequency response is 27–500 Hz. A 100 mm CCAW voice coil on TIL former, inner magnet design, aluminum shorting ring, and CNC-milled sheets with low carbon content as well as FEA-optimized magnetic circuit are part of the construction. The neodymium magnet measures 95 x 28 x 6 mm, the basket is made of an aluminum alloy with integrated ventilation holes and six-spoke structure, the surround is a Boundary Free IIR rubber surround. The cone is made of pressed pulp with mineral powders, the geometry is exponential V-cone, Xmax is 17 mm, Xmech ±27 mm, the weight is 7.5 kg. Electroacoustic parameters: Re 2.75 Ohm, Fs 33 Hz, Le 1.05 mH, Vas 23.5 l, Mms 175 g, Cms 0.125 mm/N, BL 12.6 T m, Qts 0.63, Qes 0.65, Qms 7.5, SPL 88 dB. Optimized for closed enclosures with a volume of 17–25 liters. Features 10 inch (25 cm) Subwoofer Manufacturer: Hertz Impedance 4 Ohm RMS power 700 W Peak power 1400 W Frequency response 27–500 Hz Neodymium magnet Magnet size 95 x 28 x 6 mm CCAW voice coil Ø 100 mm Voice coil In/Out wound TIL former Voice coil with inner magnet Aluminum shorting ring at the pole IIR rubber surround Boundary Free Exponential V-cone geometry Paper membrane with mineral powders Basket made of aluminum alloy with integrated ventilation holes and six spokes CNC-milled sheets with low carbon content Diamond-cut basket edge with Hertz logo Ergonomically compact design Optimized for closed enclosures 17–25 liters Xmax 17 mm Xmech ±27 mm Weight 7.5 kg Technical data Size 250 mm Impedance 4 Ohm RMS power 700 W Peak power 1400 W Frequency response 27–500 Hz Voice coil Ø 100 mm Re 2.75 Ohm Fs 33 Hz Le 1.05 mH Vas 23.5 l Mms 175 g Cms 0.125 mm/N BL 12.6 T m Qts 0.63 Qes 0.65 Qms 7.5 SPL 88 dB Xmax 17 mm Xmech ±27 mm Magnet neodymium Magnet size 95 x 28 x 6 mm Weight 7.5 kg Cone pressed pulp cone with mineral powders Physical dimensions A 268 mm Physical dimensions B 234 mm Physical dimensions C 159 mm Physical dimensions D 137 mm Physical dimensions E 274 mm Physical dimensions F 50 mm D 212.5 mm Enclosure closed compact volume 17 l Enclosure closed compact Fb 49 Hz Enclosure closed compact Qtc 0.89 Enclosure closed compact B 350 mm Enclosure closed compact H 300 mm Enclosure closed compact T 250 mm Enclosure closed compact mounting hole 235 mm Enclosure closed compact wood thickness 19 mm Sheet cut closed compact A 350 x 300 mm quantity 2 Sheet cut closed compact B 350 x 212 mm quantity 2 Sheet cut closed compact C 262 x 212 mm quantity 2 Enclosure closed power volume 25 l Enclosure closed power Fb 42.5 Hz Enclosure closed power Qtc 0.80 Enclosure closed power B 400 mm Enclosure closed power H 350 mm Enclosure closed power T 260 mm Enclosure closed power mounting hole 235 mm Enclosure closed power wood thickness 19 mm Sheet cut closed power A 400 x 350 mm quantity 2 Sheet cut closed power B 400 x 222 mm quantity 2 Sheet cut closed...
Hertz HMS 10 B4-LD-C 10 inch subwoofer Masori
1532.5 PLN
The HMS 10 B4-LD-C is a 10-inch Subwoofer from Hertz with a power handling of 300 Watts RMS and 600 Watts Peak. It has an impedance of 4 Ohms and is equipped with a 50 mm single voice coil. The diaphragm is made of polypropylene with UV inhibitors and is driven by a ferrite magnet. The model weighs 5.1 kg and has a mounting depth of 116 mm. The construction includes an aramid fiber spider, silicone-insulated connection wires, and gold-plated brass terminal connectors with silicone caps. The electro-acoustic specifications include a resonance frequency of 41 Hz and a sensitivity of 88 dB. Features 10-inch (25 cm) Subwoofer Power handling: 300 Watts RMS Power handling: 600 Watts Peak Impedance: 4 Ohms 50 mm single voice coil Polypropylene diaphragm with UV inhibitors Ferrite magnet Aramid fiber spider Silicone-insulated connection wires Gold-plated, corrosion-resistant brass terminal connectors with silicone cap Use in infinite baffle applications Technical Specifications Mounting depth: 116 mm Magnet size: 140 x 60 x 30 mm Weight: 5.1 kg Xmech: ±19 mm Xmax: 13.5 mm Fs: 41 Hz Vas: 37 l Mms: 69 g Cms: 0.22 mm/N BL: 10.2 T*m Qts: 0.71 Qes: 0.76 Qms: 11 Spl: 88 dB Re: 4.5 Ohm Le: 0.9 mH Enclosure suggestion Sealed Box Compact: 50 l, Fb 54 Hz, Qtc 1.05 Enclosure suggestion Sealed Box Performance: 71 l, Fb 51 Hz, Qtc 0.99
Hertz HMS 10 B4-LD-W 10 inch Subwoofer Masori
1574.91 PLN
Hertz HMS 10 B4-LD-W is a 10-inch (25 cm) Subwoofer with 4 Ohm impedance and single voice coil. The RMS power is 250 W, and the peak power is 500 W. It features a 50 mm voice coil, FEM-optimized mobile unit with high excursion, and a massive magnet group in a marine-grade injected polymer basket. The diaphragm is made of polypropylene with UV inhibitors and a combined Santoprene surround, aramid fiber spider with silicone-insulated connection wires. Gold-plated, corrosion-resistant brass terminal connectors with silicone caps. Xmax 12.3 mm, Xmech ±19 mm, depth 191 mm, size 250 mm, weight 5.1 kg. Designed for infinite baffle applications and tested for UV, salt mist, vibrations, splash water, temperature shock, and dust. Features 10-inch (25 cm) Subwoofer Impedance 4 Ohm Single voice coil RMS power 250 W Peak power 500 W Voice coil Ø 50 mm Installation depth 191 mm Size 250 mm Diaphragm polypropylene with UV inhibitors Combined Santoprene surround Magnet flux ferrite with high density Marine-grade injected polymer basket Aramid fiber spider with silicone-insulated connection wires Gold-plated, corrosion-resistant brass terminal connectors with silicone caps Designed for infinite baffle Resistant to UV, salt mist, vibrations, splash water, temperature shock, and dust Mounting hole 230 mm Technical Specifications Depth 191 mm Voice coil Ø 50 mm Magnet size 140 x 60 x 30 mm Weight 5.1 kg Xmech ±19 mm D 210 mm Xmax 12.3 mm Re 2.1 Ohm Fs 43 Hz Le 0.46 mH Vas 30.46 l Mms 75.6 g Cms 0.18 mm/N BL 8.3 T*m Qts 0.6 Qes 0.63 Qms 12.3 SPL 88.5 dB Physical specifications: A 277 mm, B 230 mm, C 191 mm, D 145 mm, F 46 mm Sealed box (compact): Vb 50 l; Fb 54 Hz; Qtc 1.05; B 440 mm; H 440 mm; T 365 mm; Mounting hole 230 mm; Wood thickness 19 mm Panel cut (compact): A 440 x 440 mm (2), B 440 x 327 mm (2), C 402 x 327 mm (2) Sealed box (performance): Vb 71 l; Fb 51 Hz; Qtc 0.99; B 460 mm; H 460 mm; T 450 mm; Mounting hole 230 mm; Wood thickness 19 mm Panel cut (performance): A 460 x 460 mm (2), B 460 x 412 mm (2), C 422 x 412 mm (2)
Hertz HMS 10 B2-LD-W 10 inch Subwoofer Masori
1532.5 PLN
The HMS 10 B2-LD-W is a 10-inch Marine Subwoofer from Hertz, designed for use in infinite baffle applications. The construction features FEM-optimized mobile equipment with a 50 mm voice coil and a solid ferrite magnet group. The device has a polypropylene diaphragm with UV inhibitors and an aramid fiber spider. With an RMS power handling of 250 watts and a peak power of 600 watts, the Subwoofer is designed for an impedance of 2 ohms. Features include integrated LEDs, a removable sport grill, and gold-plated brass terminal connectors with silicone caps. The physical resistance to UV radiation, salt mist, and splash water has been tested in real-world environments. Features 10-inch (25 cm) Subwoofer Marine Subwoofer for infinite baffle applications Power: 250 watts RMS Power: 600 watts Peak Impedance: 2 ohms 50 mm voice coil Ferrite magnet Polypropylene diaphragm with UV inhibitors Aramid fiber spider Integrated LEDs and removable sport grill Gold-plated, corrosion-resistant brass terminal connectors Silicone-insulated connection wires Technical Specifications Mounting depth: 116 mm Magnet size: 140 x 60 x 30 mm Weight: 5.1 kg Xmax: 12.3 mm Xmech: ±16.3 mm Resonance frequency (Fs): 43 Hz Vas: 30.46 liters Total Q (Qts): 0.60 Efficiency (Spl): 88.5 dB Outer diameter (A): 280 mm Mounting diameter (B): 227 mm Total height (C): 164 mm Enclosure recommendation Sealed Box: 50 liters or 71 liters