Audison Prima APBMW BIAMP 1 Amplifier Accessories Masori
214.95 PLN
Zyskaj dostęp do pełnej karty informacyjnej, porównaj ceny i odkryj funkcje dla PRODUKTNAME, dostępnego w cenie PRICEMONET; należy do kategorii CATEGORYNAME; sprzedaż prowadzona przez SELLERNAME, a produkcja przez PRODUCERNAME.
Prima APBMW BIAMP 1 is an Amplifier Accessories from Audison for BMW and MINI vehicles. It supports bi-amping of the front speakers. The installation takes place under the vehicle seat. A plug-and-play wiring harness allows for use without cutting the OEM wires. Separate signals are routed to the mid-bass driver and the Subwoofer. The cable length is 450 cm and is used to connect to an Audison Prima AP Bit amplifier installed in the trunk. Features Amplifier Accessories For BMW and MINI vehicles Bi-amping of the front speakers Installation under the vehicle seat Plug-and-play wiring harness Separate signal lines for mid-bass driver and Subwoofer Cable length 450 cm Connection to the Audison Prima AP Bit amplifier installed in the trunk
EAN: 8018823126694
Koszt dostawy: 6.92 PLN
Dostępność: in stock
Czas dostawy: 1-3 dni robocze
Stan: new
Prima APBMW BIAMP 1 is an Amplifier Accessories from Audison for BMW and MINI vehicles. It supports bi-amping of the front speakers. The installation takes place under the vehicle seat. A plug-and-play wiring harness allows for use without cutting the OEM wires. Separate signals are routed to the mid-bass driver and the Subwoofer. The cable length is 450 cm and is used to connect to an Audison Prima AP Bit amplifier installed in the trunk. Features Amplifier Accessories For BMW and MINI vehicles Bi-amping of the front speakers Installation under the vehicle seat Plug-and-play wiring harness Separate signal lines for mid-bass driver and Subwoofer Cable length 450 cm Connection to the Audison Prima AP Bit amplifier installed in the trunk
EAN: 8018823126694
Koszt dostawy: 6.92 PLN
Dostępność: in stock
Czas dostawy: 1-3 dni robocze
Stan: new
Porównanie podobnych produktów
Audison Prima AP4 D 4-Channel Amplifier Masori
1403.89 PLN
The Audison Prima AP4 D is a 4-Channel Amplifier in Class D with a fully bridgeable architecture. It delivers 4 x 130 W at 2 Ohms and a total power of 520 W RMS; at 14.4 V, it provides 70 W per channel at 4 Ohms and 260 W x 2 bridged at 4 Ohms. The minimum impedance is 2 Ohms per channel and 4 Ohms bridged. Features include Hi Level Input, Low Level Input, and PRE IN via RCA, a Remote IN 7–15 VDC, the Energy Saving Control MUTE control from the AP 4.9 bit or AP 5.9 bit, as well as a power supply of 7.5–15 VDC with a 30 A Fuse. Measurement values include 0.1% THD at 100 Hz at 4 Ohms, a bandwidth of 10–30k Hz, an A-weighted signal-to-noise ratio of 100 dBA, and a damping factor of 170. Additional specifications include a no-load current of 1 A, 0.05 mA in the off state, a current consumption of up to 27 A at 14.4 VDC, and an operating temperature range of 0 to 55 °C. The model is designed as an extension for the Audison Amplifiers AP 4.9 bit and AP 5.9 bit and weighs 1.33 kg. Features 4-Channel Amplifier Class D, fully bridgeable Total power RMS 520 W 4 x 130 W @ 2 Ohms 4 x 70 W @ 4 Ohms 2 x 260 W bridged @ 4 Ohms Channels 4 Hi Level Input: Yes Low Level Input: Yes PRE IN RCA Digital Input: No Adjustable Crossover: No Supply Voltage 7.5 - 15 VDC Fuse 30 A Remote IN 7 - 15 VDC (1 mA) Energy Saving Control MUTE from AP 4.9 bit / AP 5.9 bit Designed as an extension for the AP 4.9 bit and AP 5.9 bit Weight 1.33 kg Technical Data Distortion THD @ 100 Hz, 4 Ohms, 70% rated power 0.1% Bandwidth (-3 dB, 2 VRMS, 4 Ohms) 10 - 30k Hz S/N ratio A (A-weighted @ 1 V) 100 dBA Damping factor (1 kHz, 2 VRMS, 4 Ohms) 170 Input sensitivity Pre-In selectable 1.5 / 3 / 4.5 V RMS Pre-In impedance 15k Ohms Input sensitivity Speaker-In selectable 3 / 6 / 9 V RMS No-load current 1 A No-load current in the off state 0.05 mA Current consumption @ 14.4 VDC, 2 Ohms, Max music power 27 A Minimum impedance 4 channels 2 Ohms Minimum impedance bridged 2 channels 4 Ohms Output power RMS @ 14.4 VDC, 1% THD 70 W x 4 @ 4 Ohms Output power RMS @ 14.4 VDC, 1% THD 130 W x 4 @ 2 Ohms Output power RMS @ 14.4 VDC, 1% THD 260 W x 2 bridged @ 4 Ohms Output power RMS @ 14.4 VDC, 10% THD 90 W x 4 @ 4 Ohms Output power RMS @ 14.4 VDC, 10% THD 180 W x 4 @ 2 Ohms Output power RMS @ 14.4 VDC, 10% THD 360 W x 2 bridged @ 4 Ohms CEA output power @ 4 Ohms, 1% THD+N, 14.4 V 70 W x 4 CEA S/N ratio (ref. 1 W output) 85 dBA Ambient temperature range 0 °C to 55 °C
Audison Prima APK 165 6.5 inch speaker set Masori
681.98 PLN
Prima APK 165 is a 6.5 inch (16.5 cm) Speaker Set from Audison featuring an AP 1 Tweeter and an AP 6.5 Woofer. The power handling includes 100 W continuous and 300 W peak at 4 Ohm impedance. The frequency response ranges from 60 Hz to 20 kHz. The AP 1 Tweeter has a 26 mm diaphragm diameter, a wideband surround, and an acoustic lens for the range of 10 kHz to 13 kHz. The passive high-frequency Crossover APCX TW is very compact and offers a damping switch with 0 dB or +2 dB; the separation of the Woofer occurs as HP at 3.5 kHz with 6 dB per octave. The AP 6.5 Woofer uses a 32 mm voice coil made of pure copper and a water-repellent treated paper diaphragm with FEM-calculated profile, optimized with Klippel Scan Vibrometer. Additional features include reduced installation depth, TPU edge with Triple Wave profile, compact and coated basket, motor fixed with epoxy glue, and high-current quick-connect terminals with double contact and temperature-resistant cover, complemented by quick connections to passive Crossovers with polarity-different ends. Developed with the KLIPPEL suite. Features 6.5 inch (16.5 cm) Speaker Set AP 1 Tweeter with 26 mm diaphragm diameter and wideband surround Acoustic lens on the Tweeter for the range of 10 kHz to 13 kHz AP 6.5 Woofer with 32 mm voice coil made of pure copper Water-repellent treated paper diaphragm, FEM profile, optimized with Klippel Scan Vibrometer TPU edge with Triple Wave profile Reduced installation depth Compact basket with abrasion and scratch-resistant coating Motor fixed with damping epoxy glue APCX TW passive high-frequency Crossover, very compact, damping switch 0 dB, +2 dB Crossover quick connections with polarity-different ends High-current quick-connect terminal with double contact and temperature-resistant cover Power handling continuous 100 W Power handling peak 300 W Developed with the KLIPPEL suite Technical Specifications Woofer size 165 mm Tweeter size 26 mm Voice coil diameter Woofer 32 mm Voice coil diameter Tweeter 10 mm Magnet size Woofer 85 x 40 x 15 Impedance 4 Ohm Frequency response 60 Hz to 20 kHz Crossover Woofer HP at 3.5 kHz, 6 dB/Okt Tweeter level adjustment +2 dB, 0 dB Cone diameter Woofer 129 mm Xmax Woofer 2.5 mm Re Woofer 3.1 Ohm Fs Woofer 80 Hz Le Woofer 0.23 mH at 1 kHz Vas Woofer 7.6 l Mms Woofer 12 g Cms Woofer 0.31 Bxl Woofer 4.7 Qts Woofer 0.7 Qms Woofer 4.7 SPL Woofer 93.5 dB Weight Woofer 0.78 kg Weight Tweeter 0.04 kg
Audison SFC - S/PDIF Toslink - Converter Amplifier Accessories
596.91 PLN
The Audison SFC is an S/PDIF Toslink converter designed for use as Amplifier Accessories. The device features a digitally switchable input between coaxial and optical S/PDIF connections. The input sampling rate supports a range from 32 kHz/16 Bit to 192 kHz/24 Bit. The signal output is provided through coaxial and optical outputs with a fixed sampling rate of 48 kHz. For system integration, there is a remote control input and a remote control output. The power consumption during operation is 0.1 A. The compact design has dimensions of 86 x 37 x 80 mm. Features Amplifier Accessories Digital S/PDIF Toslink converter Switchable input between coaxial and optical Coaxial and optical digital outputs Housing dimensions of 86 x 37 x 80 mm Weight of 0.14 kg Remote IN and Remote OUT functionality Technical Specifications Operating voltage: 11 – 15 VDC Power consumption: 0.1 A Input sampling rate: 32 kHz/16 Bit to 192 kHz/24 Bit Output sampling rate: 48 kHz fixed Remote voltage range: 7 – 15 VDC Remote OUT type: Pass-Through signal
Audison Thesis HV venti 2-channel amplifier Masori
46666.89 PLN
Thesis HV venti is a 2-Channel Amplifier from Audison with dual-mono construction and four synchro-PWM power supplies. The MOSFET-BJT hybrid configuration uses discrete IGBTs, two Hitachi DMOS, and two pairs of complementary Sanken Power BJTs, each designed for 30 A peak current and 200 W power loss. The Class A preamplifier and driver is symmetrically built up to the driver outputs, with 90 V supply for the front-end stage and two separate channels. A separate 150 V power supply is thermally stabilized and biased in Class A. The symmetrical input combines a complementary JFET differential and a complementary BJT differential; the voltage amplifier is implemented as a cascode with a buffer. The output power is 400 W x 2 at 4 Ohm, 800 W x 2 at 2 Ohm, and 900 W x 1 at 4 Ohm at 14.4 VDC and 1% THD, with a total RMS power of 1600 W. The bandwidth is 4 Hz to 75 kHz, the S/N ratio is 100 dB, and the damping factor is 80. Additional features include fully relay-switched signal routing, exclusively discrete components, Dual Power and Bias Selector functions, Hi and Low Level inputs, and a 5 mm aluminum housing with two side cooling channels. Features 2-Channel Amplifier Dual-mono construction with four synchro-PWM power supplies MOSFET-BJT hybrid configuration with discrete IGBTs; two Hitachi DMOS drive two pairs of complementary Sanken Power BJTs (each 30 A peak current, 200 W power loss) Class A preamplifier and driver, symmetrically built up to the driver outputs Fully symmetrical input circuit with complementary JFET differential (first stage) and complementary BJT differential (second stage) Voltage amplifier as a cascode with buffer to drive the output stage Separate power supply: 90 V for front-end and channels; separate 150 V power supply, thermally stabilized and biased in Class A Manufactured exclusively with discrete components; signal routing exclusively via relays Power supply on a separate board Dual Power function to switch between Hi-Current and Hi-Power Bias Selector to change the Class A percentage Hi Level Input and Low Level Input High-quality Crossover module included 5 mm aluminum housing with two side cooling channels Technical Specifications Channels: 2 Amplifier Class: A-Class Hi Level Input: Yes Low Level Input: Yes Digital Input: No Supply Voltage: 11–16 VDC Idle Current: 4.2 A Idle Current when Off: 0.006 mA Power Consumption at 14.4 VDC, 2 Ohm, maximum music power: 90 A Remote IN: 7–16 VDC, 1 mA Distortion (THD) @ 100 Hz, 4 Ohm, 70% rated power: < 0.05 % Bandwidth (-3 dB, 2 VRMS, 4 Ohm): 4 Hz – 75 kHz Signal-to-Noise Ratio (A-weighted @ 1 V): 100 dB Damping Factor (1 kHz, 4 Ohm): 80 Input Sensitivity (Pre-In high): 0.25 – 1.6 VRMS Input Sensitivity (Pre-In low): 1 – 7 VRMS Total RMS Power: 1600 W Output Power (RMS) @ 14.4 VDC, 1% THD, 2 channels at 4 Ohm: 400 W x 2 Output Power (RMS) @ 14.4 VDC, 1% THD, 2 channels at 2 Ohm: 800 W x 2 Output Power (RMS) @ 14.4 VDC, 1% THD, 1 channel at 4 Ohm: 900 W x 1 Adjustable Crossover: No...
Rockford Fosgate Prime R2-500X1 1-Channel Amplifier Masori
1149.84 PLN
Rockford Fosgate Prime R2-500X1 is a 1-Channel Amplifier with Class-D topology and aluminum die-cast heat sink. It features symmetrical differential inputs with RCA pass-through outputs and a high-level input via 4-pin Molex, with variable input gain. An auto-sense bypass switch for vehicles with RAP (Retained Accessory Power), the C.L.E.A.N. setting, and an RLC level remote control are included. Top-mounted control panel, variable infrasonic filter, continuously variable on-board punch EQ, as well as fully adjustable 12 dB/octave high-pass and low-pass Butterworth filters. Short circuit and overcurrent protection, as well as CEA-2006 and CE compliance. RMS continuous power is 300 Watts x 1 at 4 Ohms and 500 Watts x 1 at 2 Ohms, dynamic power is 350 Watts x 1 at 4 Ohms and 590 Watts x 1 at 2 Ohms. Frequency response is 20 Hz to 250 Hz, operating voltage is 9 to 16 V DC, recommended fuse is 80 A. Maximum current draw is 52 A, input sensitivity is 150 mV to 4 V (low-level) and 450 mV to 12 V (high-level), signal inputs are 2x RCA and 4-pin Molex, signal output is 2x RCA pass-thru, dimensions are 4.9 cm x 17.3 cm x 21.5 cm. Features 1-Channel Amplifier Class-D topology Aluminum die-cast heat sink Top-mounted control panel Symmetrical differential inputs with RCA pass-through outputs High-level input compatible Variable input gain setting Auto-sense bypass switch for vehicles with RAP (Retained Accessory Power) C.L.E.A.N. setting Includes RLC level remote control Variable infrasonic filter Continuously variable on-board punch EQ Fully adjustable 12 dB/octave high-pass and low-pass Butterworth filters Short circuit and overcurrent protection CEA-2006 compliant CE compliant Technical Specifications RMS continuous power 300 Watts x 1 @ 4 Ohms RMS continuous power 500 Watts x 1 @ 2 Ohms Dynamic power 350 Watts x 1 @ 4 Ohms Dynamic power 590 Watts x 1 @ 2 Ohms Frequency response 20 Hz - 250 Hz Input sensitivity low-level 150 mV - 4 V Input sensitivity high-level 450 mV - 12 V Signal input low-level 2x RCA Signal input high-level 4-pin Molex Signal output low-level 2x RCA (pass-thru active with RCA or high-level input) Sound control 0 to +18 dB at 45 Hz Low-pass 50 Hz - 250 Hz @ 12 dB/octave Butterworth Infrasonic 15 Hz - 40 Hz @ 12 dB/octave Butterworth Operating voltage 9 - 16 V DC Recommended fuse 80 A Max. current draw (13.8 V sine wave) 52 A Dimensions 4.9 cm x 17.3 cm x 21.5 cm
Rockford Fosgate Prime R2-1200X1 1-Channel Amplifier Masori
1913.69 PLN
Rockford Fosgate Prime R2-1200X1 is a 1-Channel Amplifier in Class-D topology. It features symmetrical differential inputs with RCA pass-through outputs and a high-level compatible input. The setup includes variable input gain, auto-sense bypass for RAP, C.L.E.A.N. setting, and a top-mounted control panel. Included are an RLC level remote control, a continuously variable on-board punch EQ, and a variable infrasonic filter. The heat sink is made of aluminum die-cast, with short circuit and overcurrent protection, and it complies with CEA-2006 and CE standards. RMS continuous power is 1200 Watts x 1 at 1 Ω, frequency response is 20 Hz to 250 Hz, efficiency is on average greater than 80%, operating voltage is 9 to 16 VDC, dimensions are 49 x 173 x 285 mm. Features 1-Channel Amplifier Class-D topology Symmetrical differential inputs with RCA pass-through outputs High-level input compatible Variable input gain adjustment Auto-sense bypass switch for vehicles with RAP C.L.E.A.N. setting Includes RLC level remote control Variable infrasonic filter Top-mounted control panel Continuously variable on-board punch EQ Short circuit and overcurrent protection CEA-2006 compliant CE compliant Heat sink made of aluminum die-cast Fully adjustable 12 dB/octave high-pass and low-pass Butterworth filters Technical Specifications RMS continuous power 400 Watts x 1 at 4 Ω RMS continuous power 800 Watts x 1 at 2 Ω RMS continuous power 1200 Watts x 1 at 1 Ω Dynamic power 489 Watts x 1 at 4 Ω Dynamic power 889 Watts x 1 at 2 Ω Dynamic power 1389 Watts x 1 at 1 Ω Frequency response 20 Hz to 250 Hz Input sensitivity low-level 150 mV to 4 V Input sensitivity high-level 450 mV to 12 V Efficiency on average greater than 80% Signal input low-level 2 RCA Signal input high-level 4-pin Molex Signal output low-level 2 RCA pass-thru active with RCA or high-level input Sound control 0 to +18 dB at 45 Hz Low-pass 50 Hz to 250 Hz at 12 dB per octave Butterworth Subsonic 15 Hz to 40 Hz at 12 dB per octave Butterworth Remote control Yes Power Cable 20 mm² Speaker Cable 8 mm² Cooling Convection Operating voltage 9 to 16 VDC Recommended Fuse 200 A Maximum current draw 121 A at 13.8 V sine wave Dimensions height 49 mm Dimensions width 173 mm Dimensions depth 285 mm
Audison Prima APBX 8 DS 8 inch Enclosure Subwoofer Masori
1108.53 PLN
Prima APBX 8 DS is an 8-inch Enclosed Subwoofer from Audison with a 4 + 4 Ohm dual voice coil. The power handling is 250 W continuous and 500 W peak. The sealed, ultra-flat enclosure with a volume of 8.5 liters integrates the 2S² design for down-firing or up-firing installation. The cone is made of water-resistant, pressed paper, and the magnet is made of High Density Flux Ferrite. SSP Sub Smart Plug with pressure contacts and plug-and-play terminal block, leveling feet with Velcro inserts, and rounded corners are integrated. The driver motor assembly is FEM-optimized, and the cone dust cap basket geometry and Klippel-supported development, as well as a sturdy metal grille, are additional features. Dimensions: Length 374 mm, Width 334 mm, Height 109 mm; Size 200 mm. Features 8-inch Enclosed Subwoofer 4 + 4 Ohm dual voice coil Power handling continuous 250 W Power handling peak 500 W Enclosure volume 8.5 liters Sealed design 2S² design (2 Sides/2 Sounds) with down-firing or up-firing installation Ultra-flat enclosure 131 mm SSP Sub Smart Plug with pressure contacts and plug-and-play terminal block Leveling feet with Velcro inserts Rounded corners Sturdy metal grille Massive driver motor assembly, FEM-optimized (Finite Element Method) Specially designed cone dust cap basket geometry Cone water-resistant, pressed paper Magnet High Density Flux Ferrite Tuned to the APS 8 D driver Designed for combination with Audison AP1 D mono or AP4.9 bit/AP4 D (2 channels bridged) amplifiers with bass boost and parametric DSP equalizer Technical Specifications Size 200 mm Length 374 mm Width 334 mm Height 109 mm
Audison Prima APS 10 S4S 10 Inch Subwoofer Masori
895.76 PLN
The Audison Prima APS 10 S4S is a 10-inch (25 cm) Subwoofer with a single 4-ohm voice coil. The design features an ultra-flat profile of 120 mm and is intended for sealed enclosures starting from 10 liters. The power handling is 400 W continuous and 800 W peak. The magnetic system uses High Density Flux Ferrite, and the voice coil measures 60 mm in diameter. The water-resistant treated, pressed paper cone and the cone dust cap basket geometry were developed using FEM and optimized with the Klippel Scan Vibrometer. Xmax is 12.6 mm, Xmech is 18 mm, Fs is 28.5 Hz, Vas is 39.62 liters, and Qts is 0.68. D 220 mm, dimensions A 270 mm, B 233 mm, C 105 mm, and D 88 mm, weight 5.24 kg. Includes steel grille and plastic gasket; basket with venting openings below the spider. Single voice coil design for combination with AP F8.9 Bit (2 CH, bridged, 260 Watts RMS). Features 10-inch (25 cm) Subwoofer Single voice coil 4 Ohm Ultra-flat profile 120 mm Optimized for sealed enclosures starting from 10 liters Water-resistant treated, pressed paper cone High Density Flux Ferrite magnetic system Basket with venting openings below the spider Cone dust cap basket geometry, FEM developed and optimized with Klippel Massive motor assembly, FEM optimized Includes steel grille and plastic gasket Single voice coil design for combination with AP F8.9 Bit (2 CH, bridged, 260 Watts RMS) Technical Specifications Size 250 mm Power handling peak 800 W Power handling continuous 400 W Impedance 4 Ohm Voice coil Ø 60 mm Cone material water-resistant treated, pressed paper Magnet material High Density Flux Ferrite Xmax 12.6 mm Xmech 18 mm D 220 mm Re 3.7 Ohm Fs 28.5 Hz Vas 39.62 liters Mms 160 g Cms 0.2 mm/N BL 12.9 T·m Qms 6.9 Qes 0.75 Qts 0.68 Le Standard 1.9 mH Spl 83.5 dB Driver displacement volume 1.12 Weight 5.24 kg Dimension A 270 mm Dimension B 233 mm Dimension C 105 mm Dimension D 88 mm
Audison Prima APBX 8 R 8 inch Enclosure Subwoofer Masori
1108.69 PLN
Audison Prima APBX 8 R is an 8-inch Enclosed Subwoofer in a bass reflex design with an ultra-flat housing. The slot-porting design is tuned to the APS 8 R driver and utilizes the pressure chamber effect below 60 Hz. The 2S² design allows for down-firing or up-firing. The SSP Sub Smart Plug integrates pressure contacts and a plug-and-play terminal block for impedance configuration with quick release. The drive includes a massive, FEM-modeled motor assembly as well as a water-resistant cone made of cotton fiber pressed paper with a special cone dust cap basket geometry. The linear excursion is 9 mm (one-sided), a stable metal grille protects the driver, and rounded corners serve as reinforcement. The dimensions are 470 mm in length, 334 mm in width, and 109 mm in height. Designed for use with AP8.9 bit (2 CH bridged) or AP4.9 bit/AP4 D (2 CH bridged). Features 8-inch Enclosed Subwoofer Bass reflex housing Ultra-flat housing Slot-porting design, tuned to APS 8 R driver 2S² design with down-firing or up-firing SSP Sub Smart Plug with pressure contacts and plug-and-play terminal block, impedance configuration, quick release Leveling feet with Velcro Rounded corners for easy positioning and to reduce cabinet resonances Stable metal protective grille Water-resistant cone made of cotton fiber pressed paper Massive, FEM-modeled driver motor assembly Cone profile calculated with FEM and optimized with Klippel scan vibrometer Magnet material high density flux ferrite Utilizes the pressure chamber effect below 60 Hz Specifically designed for use with AP8.9 bit (2 CH bridged) or AP4.9 bit/AP4 D (2 CH bridged) Technical Specifications Size 200 mm Impedance 4 Ohm Power handling continuous 250 W Power handling peak 500 W Linear excursion 9 mm (one-sided) Length 470 mm Width 334 mm Height 109 mm
Audison Prima APS 10 D 10 inch Subwoofer Masori
895.76 PLN
Audison Prima APS 10 D is a 10-inch (25 cm) Subwoofer with a dual voice coil and an ultra-flat profile of 120 mm. Designed for sealed enclosures with a volume of 10 to 12 liters. The power handling is 400 W continuous and 800 W peak at an impedance of 4.4 Ohm. The construction includes a 60 mm voice coil, High Density Flux Ferrite Magnet, and a water-resistant, pressed paper cone. A special cone dust cap basket geometry, along with surround and centering spider to prevent rocking mode, supports a long linear excursion of 11 mm; Xmax is 12.6 mm, Xmech 18 mm. The cooling circuit relies on venting openings on the basket below the spider without a central venting opening on the bottom plate. Plug connections, a robust, FEM-optimized motor assembly, and a profile optimized with Klippel Scan Vibrometer are integrated; steel grille and plastic gasket are included. Features 10-inch (25 cm) Subwoofer Manufacturer Audison Power handling continuous 400 W Power handling peak 800 W Impedance 4.4 Ohm Dual voice coil design Ultra-flat profile 120 mm For sealed enclosures 10 to 12 liters Plug connections Voice coil 60 mm Magnet High Density Flux Ferrite Cone water-resistant, pressed paper Special cone dust cap basket geometry Surround and centering spider to prevent rocking mode Venting openings on the basket below the spider, no central venting opening on the bottom plate Robust motor assembly, FEM-optimized Profile optimized with Klippel Scan Vibrometer Includes steel grille and plastic gasket Technical Specifications Size 250 mm D 220 mm Re 2.2 Ohm Fs 27 Hz Vas 41 l Mms 170 g Cms 0.2 mm/N BL 10.4 T·m Qms 4.7 Qes 0.58 Qts 0.52 Le Standard 1.5 mH Spl 84 dB Xmax 12.6 mm Xmech 18 mm Driver displacement volume 1.12 Weight 5.24 kg Dimension A 270 mm Dimension B 233 mm Dimension C 105 mm Dimension D 88 mm
Audison Prima AP 6.5 6.5 Inch Woofer Masori
375.96 PLN
The Audison Prima AP 6.5 is a 6.5 inch (16.5 cm) mid-bass speaker with a continuous power handling of 70 W and a peak power handling of 210 W. It features a 32 mm voice coil made of pure copper, a water-resistant treated paper cone, and a TPU surround with a flat triple wave profile. The diaphragm was developed using the finite element method and optimized with the Klippel R&D scan vibrometer, including calibrated mechanical low-pass cutoff frequency. The compact basket has a wear- and scratch-resistant coating, and the motor is secured with damping epoxy glue. The high-current quick-connect terminal with double contact is present, as well as a temperature-resistant cover. The frequency response ranges from 60 to 5 kHz, the impedance is 4 Ohms, the linear excursion Xmax is 2.5 mm, and the sound pressure level is 93.5 dB. Developed with the KLIPPEL suite. Features 6.5 inch (16.5 cm) mid-bass speaker 32 mm voice coil made of pure copper Water-resistant treated paper cone Diaphragm developed per FEM and optimized with Klippel R&D scan vibrometer Calibrated mechanical low-pass cutoff frequency TPU surround with flat triple wave profile Low installation depth Compact basket with wear- and scratch-resistant coating Motor secured with damping epoxy glue High-current quick-connect terminal with double contact for positive and negative Temperature-resistant plastic cover for the terminal No passive crossover required Developed with the KLIPPEL suite Technical Specifications Size: 165 mm Peak power handling: 210 W Continuous power handling: 70 W Impedance: 4 Ohms Frequency response: 60 - 5 kHz Voice coil: 32 mm Qes: 0.8 Xmax: 2.5 mm D: 129 mm Re: 3.1 Ohms Fs: 80 Hz Vas: 7.6 l Mms: 12 g Cms: 0.31 mm/N BL: 4.7 T·m Qms: 4.7 Qts: 0.7 Le: 0.23 mH SPL: 93.5 dB Weight: 0.78 kg Dimension A: 165 mm Dimension B: 141 mm Dimension C: 60 mm Dimension D: 56 mm
Audison Prima AP 5 5 Inch Midwoofer Masori
375.91 PLN
The Prima AP 5 is a 5-inch (13 cm) mid-bass driver from Audison. It offers 150 W peak power and 50 W continuous power, 4 Ohm impedance, and a frequency response of 70 - 5 kHz. A 32 mm voice coil made of pure copper is integrated. The water-repellent treated paper cone features a profile developed using FEM and has been optimized with the Klippel R&D Scan Vibrometer. A passive Crossover is not required, as the mechanical low-pass cutoff frequency is calibrated. A TPU sphere with a triple-wave profile is present. Reduced installation depth, compact basket with abrasion and scratch-resistant coating, and a motor secured with damping epoxy glue. High-current quick-connect terminal with double contact and temperature-resistant plastic cover. Developed with the KLIPPEL suite. Features 5-inch (13 cm) mid-bass driver Peak power 150 W Continuous power handling 50 W Impedance 4 Ohm Frequency response 70 - 5 kHz 32 mm voice coil made of pure copper Water-repellent treated paper cone, profile developed using FEM and optimized with Klippel R&D Scan Vibrometer No passive Crossover required, mechanical low-pass cutoff frequency TPU sphere with triple-wave profile Reduced installation depth Compact basket with abrasion and scratch-resistant coating, motor secured with damping epoxy glue High-current quick-connect terminal with double contact and temperature-resistant plastic cover Developed with the KLIPPEL suite Technical Specifications Size 130 mm Xmax 2 mm D 107 mm Re 3.1 Ohm Fs 90 Hz Vas 4 l Mms 9 g Cms 0.34 mm/N BL 4.6 T·m Qes 0.74 Qms 8 Qts 0.68 Le Standard 0.25 mH Spl 93 dB Weight 0.65 kg Dimension A 130 mm Dimension B 119 mm Dimension C 51.5 mm Dimension D 48.5 mm
Audison Prima APG 4 Speaker Grille Masori
74.33 PLN
Prima APG 4 is a Speaker Grille from Audison. Size: 4 inches (101.6 mm). Dimensions: 165 mm. Compatible with woofers and 100 mm coaxial speakers. Suitable for the Audison AP 4. Stabilizing and protective grille. Features Speaker Grille Size: 4 inches (101.6 mm) Dimensions: 165 mm Compatible with woofers and 100 mm coaxial speakers Suitable for the Audison AP 4 Stabilizing and protective grille
Audison Prima AP 1 Dome Tweeter Masori
333.38 PLN
Audison Prima AP 1 is a Dome Tweeter with a 26 mm diaphragm and wide outer suspension. It is specified with a peak power of 150 W and an impedance of 4 Ohm. The frequency response ranges from 2 kHz to 20 kHz, the voice coil measures 20 mm and is made of ultra-light CCAW, ferrofluid-cooled on a Kapton former. A motor with a neodymium magnet and an acoustic lens for the range of 10–13 kHz are used. The passive crossover APCX TW with damping switch 0 dB or +2 dB is included. Dome profile and motor have been optimized using FEM simulation, developed with the KLIPPEL Suite. Features Dome Tweeter Size 26 mm Impedance 4 Ohm Peak power 150 W Frequency response 2 kHz – 20 kHz Voice coil Ø 20 mm Diaphragm material Teloton Fibre Magnet material Neodymium Acoustic lens for compensation in the range of 10–13 kHz with restrictive OEM grilles Passive crossover APCX TW included with damping switch 0 dB or +2 dB OEM integration-compatible quick connectors Extensive mounting accessories included CCAW ultra-light, ferrofluid-cooled voice coil on Kapton former Dome profile and motor FEM-optimized Developed with the KLIPPEL Suite Technical specifications Re 3.5 Ohm Fs 1500 Hz Mms 0.16 g Cms 0.09 mm/N BL 1.3 T·m Qms 1.5 Qes 2.78 Qts 0.98 Le 0.02 mH SPL 93 dB D 27.5 mm Power consumption with crossover: High-pass at 3.5 kHz, 12 dB/Oct Weight 0.04 kg Crossover weight 0.04 kg Size A 44 mm Size C 20 mm Size D 8.5 mm Size G 46.5 mm Size H 37.5 mm
Rockford Fosgate Prime R2-750X5 5-Channel Amplifier Masori
2125.93 PLN
The Rockford Fosgate Prime R2-750X5 is a 5-Channel Amplifier in full-range Class-D with an aluminum die-cast heat sink. Equipped with balanced differential inputs, RCA pass-through, and high-level inputs, as well as a 2/4/5-channel input selector switch. Auto-sense bypass for RAP, C.L.E.A.N. setting, and an RLC level remote control are integrated. Fully adjustable 12 dB/octave high-pass and low-pass Butterworth filters, variable infrasonic filter, and a continuously variable on-board punch EQ. Short circuit and overcurrent protection, rollback protection, CEA-2006 and CE compliance, top-mounted control panel, and convection cooling. Frequency response 20 Hz to 20 kHz, operating voltage 9 to 16 VDC, recommended fuse 120 A, and dimensions 4.9 cm x 17.3 cm x 28.5 cm. Features 5-Channel Amplifier Full-range Class-D Balanced differential inputs with RCA pass-through outputs High-level input compatible 2/4/5-channel input selector switch Auto-sense bypass switch for vehicles with RAP (Retained Accessory Power) C.L.E.A.N. setting Includes RLC level remote control Variable infrasonic filter Continuously variable on-board punch EQ Front, rear, and sub variable input gain adjustment Top-mounted control panel Short circuit and overcurrent protection Rollback protection Fully adjustable 12 dB/octave high-pass and low-pass Butterworth filters CEA-2006 compliant CE compliant Technical Specifications Frequency response: 20 Hz - 20 kHz RMS power: 50 Watts x 4 + 200 Watts x 1 @ 4 Ω RMS power: 100 Watts x 4 + 350 Watts x 1 @ 2 Ω RMS power: 200 Watts x 2 @ 4 Ω (Bridged/Mono) Dynamic power: 70 Watts x 4 + 241 Watts x 1 @ 4 Ω Dynamic power: 114 Watts x 4 + 426 Watts x 1 @ 2 Ω Dynamic power: 234 Watts x 2 @ 4 Ω (Bridged/Mono) Bridgable: Yes Input sensitivity Low-Level: 150 mV - 4 V Input sensitivity High-Level: 450 mV - 12 V Circuit topology: Class-D Signal input Front Low-Level: 2 RCA Signal input Front High-Level: 4-Pin Molex Signal input Rear Low-Level: 2 RCA Signal input Rear High-Level: 4-Pin Molex Signal input Sub Low-Level: 2 RCA Signal input Sub High-Level: 4-Pin Molex Input switch: 2/4/5 inputs (RCA/Hi-Level) Sound control: 0 to +18 dB at 45 Hz Front high-pass: 50 Hz - 250 Hz @ 12 dB/octave Butterworth Front low-pass: 50 Hz - 250 Hz @ 12 dB/octave Butterworth Rear high-pass: 50 Hz - 250 Hz @ 12 dB/octave Butterworth Rear low-pass: 50 Hz - 250 Hz @ 12 dB/octave Butterworth Sub low-pass: 50 Hz - 250 Hz @ 12 dB/octave Butterworth Sub infrasonic: 15 Hz - 40 Hz @ 12 dB/octave Butterworth Remote controls: Yes Cable diameter: 20 mm² Speaker cable diameter: 8 mm² Cooling: Convection Operating voltage: 9 - 16 VDC Recommended fuse: 120 A Max. current draw (13.8 V RMS): 71 A Dimensions (H x W x D): 4.9 cm x 17.3 cm x 28.5 cm
Rockford Fosgate Prime R2-200X2 2-Channel Amplifier Masori
979.53 PLN
Prime R2-200X2 is a 2-Channel Amplifier from Rockford Fosgate in the Prime R2 series, featuring full-range Class-D technology. Equipped with balanced differential inputs, RCA pass-through outputs, and high-level input (4-Pin Molex). C.L.E.A.N. setting, auto-sense bypass switch for vehicles with RAP, variable input gain, and top-mounted control panel. CEA-2006 and CE compliant, protection against short circuit and overcurrent, aluminum cast heat sink, and convection cooling. Fully adjustable 12 dB/octave high-pass and low-pass Butterworth crossovers from 50 Hz to 250 Hz, as well as bridging capability. RMS power 50 Watts x 2 @ 4Ω, 100 Watts x 2 @ 2Ω, and 200 Watts x 1 @ 4Ω bridged; dynamic power 60 Watts x 2 @ 4Ω, 107 Watts x 2 @ 2Ω, and 215 Watts x 1 @ 4Ω bridged. Frequency response 20 Hz - 20 kHz, input sensitivity low-level 150 mV - 4 V and high-level 450 mV - 12 V, operating voltage 9 - 16 VDC. Signal inputs 2x RCA (low-level) and high-level, signal output 2x RCA pass-thru active, dimensions 4.9 cm x 17.3 cm x 20.5 cm, recommended fuse 30 A, max. current draw 18 A, cable diameter 20 mm² and speaker cable 8 mm². Features 2-Channel Amplifier Full-range Class-D Bridgable: Yes Balanced differential inputs with RCA pass-through outputs High-level input compatible Features C.L.E.A.N. setting Auto-sense bypass switch for vehicles with RAP (Retained Accessory Power) Variable input gain adjustment Top-mounted control panel CEA-2006 compliant and CE compliant Protection against short circuit and overcurrent Aluminum cast heat sink Fully adjustable 12 dB/octave high-pass and low-pass Butterworth crossovers Cooling: Convection Technical Specifications Frequency response: 20 Hz - 20 kHz RMS power 50 Watts x 2 @ 4Ω RMS power 100 Watts x 2 @ 2Ω RMS power 200 Watts x 1 @ 4Ω bridged/mono Dynamic power 60 Watts x 2 @ 4Ω Dynamic power 107 Watts x 2 @ 2Ω Dynamic power 215 Watts x 1 @ 4Ω bridged/mono Input sensitivity low-level: 150 mV - 4 V Input sensitivity high-level: 450 mV - 12 V Circuit topology class: Class-D Signal input low-level: 2 RCA Signal input high-level: 4-Pin Molex Signal output low-level: 2 RCA (pass-thru active with RCA or high-level input) High-pass: 50 Hz - 250 Hz @ 12 dB/octave Butterworth Low-pass: 50 Hz - 250 Hz @ 12 dB/octave Butterworth Remote controls: No Operating voltage: 9 - 16 VDC Recommended fuse: 30 A Max. current draw (13.8 V RMS): 18 A Cable diameter: 20 mm² Speaker cable diameter: 8 mm² Dimensions (H x W x D): 4.9 cm x 17.3 cm x 20.5 cm
Audison Prima APS 8 D 8 inch Subwoofer Masori
682.73 PLN
The Audison Prima APS 8 D is an 8-inch (20 cm) Subwoofer with 250 W continuous power, 500 W peak power, and 2 Ohm impedance. The design features a specially developed cone dust cap basket geometry, an ultra-flat profile of 79 mm, and dual voice coils. High Density Flux Ferrite is used as the magnet material, and a water-repellent, pressed paper diaphragm. Push terminals, venting openings on the basket under the spider, and a central venting opening are integrated. The motor assembly is optimized by FEM; Xmax 8.8 mm and Xmech 16.5 mm. Electroacoustic parameters: Fs 30 Hz, Vas 25.5 l, Re 2.1 Ohm, Qes 0.46, Qms 5.1, Qts 0.44, BL 8.8 T·m, Le 1.1 mH, Mms 85 g, Cms 0.3 mm/N, D 173 mm, sound pressure level 83.5 dB. Dimensions: A 222 mm, B 187 mm, C 94.6 mm, D 79 mm; size 200 mm; weight 3.1 kg. Delivery includes steel grille and plastic gasket; recommended enclosure closed from 7.5 l. Features 8-inch (20 cm) Subwoofer Power handling continuous 250 W Power handling peak 500 W Impedance 2 Ohm Ultra-flat profile 79 mm Dual voice coil design Push terminals Magnet material High Density Flux Ferrite Diaphragm water-repellent, pressed paper Specially developed cone dust cap basket geometry Venting openings on the basket under the spider, central venting opening Robust, FEM-optimized motor assembly Includes steel grille and plastic gasket Closed enclosure from 7.5 l Technical Specifications Size 200 mm Xmax 8.8 mm Xmech 16.5 mm D 173 mm Driver displacement volume 0.67 Re 2.1 Ohm Fs 30 Hz Vas 25.5 l Mms 85 g Cms 0.3 mm/N BL 8.8 T·m Qms 5.1 Qes 0.46 Qts 0.44 Le 1.1 mH Sound pressure level 83.5 dB Weight 3.1 kg Dimension A 222 mm Dimension B 187 mm Dimension C 94.6 mm Dimension D 79 mm
Audison Prima APK 165 Ohm2 6.5 Inch Speaker Set
681.98 PLN
Audison Prima APK 165 Ohm2 is a 6.5 inch (16.5 cm) Speaker Set. The 2-way system operates at 2 Ohms and includes the crossovers APCX WF 2Ω and APCX TW 2Ω with Cut Off @ 4.5 / 5 kHz. The power handling is 100 W continuous and 300 W peak. The woofer measures 165 mm with a 25 mm voice coil, Xmax 2.8 mm, and water-resistant treated paper cone. The tweeter is 26 mm in size with a 20 mm voice coil and acoustic lens with frequency response compensation in the range of 10–13 kHz. High-frequency level adjustment +2/0 and Hi-Contour function are integrated. The frequency response is 50–20k, the resonance frequency is 75 Hz, and the sensitivity is 95 dB. TPU edge with Triple Wave, reduced installation depth, compact basket with abrasion and scratch-resistant coating, and high-current quick-connect terminal with double contact and temperature-resistant cover are part of the equipment. Developed with the KLIPPEL Suite. Features 6.5 inch (16.5 cm) Speaker Set 2-way system Impedance 2 Ohm Peak power handling 300 W Continuous power handling 100 W Frequency response 50–20k Hz Two crossovers APCX WF 2Ω low-frequency crossover APCX TW 2Ω tweeter crossover with Hi-Contour function Cut Off @ 4.5 / 5 kHz High-frequency level adjustment +2/0 AP 1 tweeter with acoustic lens; frequency response compensation 10–13 kHz AP 6.5 2Ω woofer with water-resistant treated paper cone TPU edge with Triple Wave Reduced installation depth Compact basket with abrasion and scratch-resistant coating High-current quick-connect terminal with double contact; temperature-resistant plastic cover Passive crossover with integrated connection cable and Fast-on connectors; different connections per pole Developed with the KLIPPEL Suite Technical Specifications Woofer size 165 mm Tweeter size 26 mm Woofer cone diameter 127 mm Voice coil diameter woofer 25 mm Voice coil diameter tweeter 20 mm Magnet size woofer 85 x 32 x 15 Xmax woofer 2.8 mm Re woofer 2.1 Ohm Fs woofer 75 Hz Le woofer @ 1 kHz 0.15 mH Vas woofer 8.5 l Mms woofer 10.5 g Cms woofer 0.4 Bxl woofer 3.8 Qts woofer 0.63 Qms woofer 4.8 Spl woofer 95 dB Weight woofer 0.78 kg Weight tweeter 0.04 kg
Audison Prima AP 4 4 Inch Midbass Driver Masori
333.34 PLN
Audison Prima AP 4 is a 4 inch (10 cm) mid-bass driver with a nominal size of 100 mm. The frequency response ranges from 80 to 7.5 kHz, the impedance is 4 Ohm, and the sound pressure level is 91 dB. The power handling is 120 W peak and 40 W continuous. It features a 25 mm voice coil made of pure copper, a water-repellent treated paper cone, and a TPU surround with a flat triple-wave profile. The cone profile was developed using FEM and optimized with the Klippel Scan Vibrometer; developed with the KLIPPEL Suite. The compact basket is coated with an abrasion- and scratch-resistant finish, complemented by a low installation depth. Re 3.2 Ohm, Qts 1, Qes 1.2, and Xmax 1.8 mm are specified. Fs 125 Hz, Vas 1.5 l, Mms 5 g, Cms 0.3 mm/N, and BL 3.4 T m are detailed. Dimensions: A 103 mm, B 93 mm, C 43 mm, D 41 mm; Weight 0.4 kg. Features 4 inch (10 cm) mid-bass driver Size 100 mm Power handling peak 120 W Power handling continuous 40 W Impedance 4 Ohm Frequency response 80 - 7.5 kHz Voice coil 25 mm made of pure copper Water-repellent treated paper cone TPU surround with flat triple-wave profile Compact basket with abrasion-resistant and scratch-resistant coating Low installation depth No passive crossover required thanks to mechanically calibrated low-pass cutoff frequency Cone profile developed via FEM and optimized with Klippel Scan Vibrometer Developed with the KLIPPEL Suite Very wide frequency response and high efficiency Technical specifications Size 100 mm Power handling peak 120 W Power handling continuous 40 W Impedance 4 Ohm Frequency response 80 - 7.5 kHz Voice coil 25 mm Xmax 1.8 mm Qes 1.2 D 85 mm Re 3.2 Ohm Fs 125 Hz Vas 1.5 l Mms 5 g Cms 0.3 mm/N BL 3.4 T m Qms 7.6 Qts 1 Le 0.16 mH SPL 91 dB Weight 0.4 kg Dimension A 103 mm Dimension B 93 mm Dimension C 43 mm Dimension D 41 mm
Audison Prima APS 8 R 8 inch Subwoofer Masori
640.3 PLN
Audison Prima APS 8 R is an 8-inch (200 mm) Subwoofer with 4 Ohm, 250 W continuous power handling, and 500 W peak power handling. Designed for bass reflex enclosures starting from 8.5 liters with a tuning between 30 and 40 Hz. The special cone dust cap basket geometry allows for high excursion at a low height, supported by venting openings below the spider and a novel cooling circuit. The ultra-flat profile measures 79 mm; the voice coil is 40 mm, Xmax is 8.8 mm, and Xmech is 16.5 mm. The magnet material is High Density Flux Ferrite, and the cone is made of water-repellent, pressed paper; the motor assembly and cone profile are optimized with FEM and Klippel Scan Vibrometer. Includes steel grille and plastic gasket. Designed for bridged operation with Audison AP8.9 bit or AP4.9 bit/AP4 D. Weight is 3.04 kg and dimensions are A 222 mm, B 187 mm, C 94.6 mm, and D 79 mm. Features 8-inch (20 cm) Subwoofer Impedance 4 Ohm RMS power 250 W Peak power 500 W Size 200 mm Ultra-flat profile 79 mm For bass reflex enclosures starting from 8.5 liters Tuning 30–40 Hz Special cone dust cap basket geometry for high excursion Venting openings on the basket below the spider; central bottom venting is omitted Novel cooling circuit Massive, FEM-optimized motor assembly Water-repellent, pressed paper cone; profile optimized with FEM simulation and Klippel Mounting close to the rear wall of the enclosure is possible Includes steel grille and plastic gasket Combination with Audison AP8.9 bit (2 CH bridged) or AP4.9 bit/AP4 D (2 CH bridged) Technical Specifications Voice coil Ø 40 mm Magnet material High Density Flux Ferrite Xmax 8.8 mm Xmech 16.5 mm D 173 mm Driver displacement volume 0.67 Re 3.7 Ohm Fs 32 Hz Vas 26.5 l Mms 80 g Cms 0.33 mm/N BL 11.5 T·m Qms 5.1 Qes 0.43 Qts 0.41 Le 1.45 mH Sound pressure level 84 dB Weight 3.04 kg Dimension A 222 mm Dimension B 187 mm Dimension C 94.6 mm Dimension D 79 mm
Audio System Helon H-5000.1 D 1-Channel Amplifier Masori
5310.85 PLN
The Helon H-5000.1 D is a 1-Channel Amplifier from Audio System as a digital mono high-performance amplifier with SMD technology. A QUAD MOSFET Power Supply and an extremely high damping factor are integrated. The RMS power ratings are 1x1650 watts at 4 ohms, 1x3100 watts at 2 ohms, and 1x5000 watts at 1 ohm. A CLIP/VOLT/TEMPERATURE display with limiter is available, as well as a 24 dB low pass filter and a 24 dB subsonic filter. Bass Boost +9 dB at 45 Hz and a continuously adjustable phase shift from 0–180° are included. The efficiency is up to 90% and the dimensions are 550 x 63 x 256 mm. Two units can be operated in link mode, with up to 1x10000 watts RMS at 2 ohms at 14 V. Including RTC-PLUS. Features 1-Channel Amplifier Digital mono high-performance amplifier with SMD technology QUAD MOSFET Power Supply CLIP/VOLT/TEMPERATURE display and limiter Low Pass Filter (24 dB) Subsonic Filter (24 dB) Bass Boost +9 dB at 45 Hz Continuously adjustable 0–180° phase shift Up to 90% efficiency Extremely high damping factor Including RTC-PLUS Link mode for two units Technical Specifications RMS power: 1x1650 watts at 4 ohms RMS power: 1x3100 watts at 2 ohms RMS power: 1x5000 watts at 1 ohm RMS power (linked): 1x10000 watts at 2 ohms (2 amplifiers at 14 V) Dimensions: 550 x 63 x 256 mm
Audio System Helon H-3300.1 D 1-Channel Amplifier Masori
2125.93 PLN
Audio System Helon H-3300.1 D is a 1-Channel Amplifier from the Helon SERIES. The digital MONO high-performance amplifier with SMD technology features a Low Pass Filter and Subsonic filter. The phase shift is continuously adjustable from 0–180°. The efficiency is up to 84%. There is a RCA high-level input with automatic turn-on. Bass Boost at 45 Hz is adjustable from 0–12 dB. RTC is included. The power output is 1 x 825 WRMS at 4 Ohms, 1 x 1650 WRMS at 2 Ohms, and 1 x 3300 WRMS at 1 Ohm. Features 1-Channel Amplifier Digital MONO high-performance amplifier with SMD technology Helon SERIES Low Pass Filter Subsonic filter Continuously adjustable phase shift 0–180° Efficiency up to 84% RTC included RCA high-level input with automatic turn-on Bass Boost at 45 Hz: 0–12 dB Technical Specifications RMS power at 4 Ohms: 1 x 825 WRMS RMS power at 2 Ohms: 1 x 1650 WRMS RMS power at 1 Ohm: 1 x 3300 WRMS Efficiency: up to 84% Phase shift: 0–180° Bass Boost: 0–12 dB at 45 Hz Input: RCA high-level input with automatic turn-on
Audio System Helon H-3000.1 D 1-Channel Amplifier Masori
4244.65 PLN
Helon H-3000.1 D is a 1-Channel Amplifier from Audio System with digital MONO high-performance architecture. The model features Full-MOSFET and SMD technology as well as a Dual MOSFET Power Supply. On the filter side, there is a 24 dB Low Pass Filter and a 24 dB Subsonic Filter available. Additional features include a Bass Boost of +6 dB at 45 Hz and a continuously adjustable phase shift from 0–180°. The efficiency is up to 86%. An RTC is included. The housing measures 594 x 50 x 248 mm. Features 1-Channel Amplifier Digital MONO high-performance amplifier with SMD technology Full-MOSFET technology Dual MOSFET Power Supply 24 dB Low Pass Filter 24 dB Subsonic Filter Bass Boost +6 dB at 45 Hz Continuously adjustable 0–180° phase shift Up to 86% efficiency Includes RTC Technical Specifications 1 x 750 WRMS at 4 Ohm Mono 1 x 1500 WRMS at 2 Ohm Mono 1 x 3000 WRMS at 1 Ohm Mono 1 x 6000 WRMS at 2 Ohm 2x amplifiers linked at 14 V 1 x 7500 WRMS at 2 Ohm 2x amplifiers linked at 16 V Dimensions 594 x 50 x 248 mm
Audio System CO-650.1 D 1-Channel Amplifier Masori
1212.89 PLN
CO-650.1 D is a 1-Channel Amplifier from Audio System with Class-D amplifier technology. It delivers 1 x 400 W RMS at 4 Ohm and 1 x 650 W RMS at 2 Ohm. Low Pass Filter, subsonic filter, continuously adjustable phase shift 0–180°, and an EQ at 45 Hz with 0–6 dB are integrated. The efficiency is up to 84%. An RTC Bass Remote Control is included. An RCA high-level input with automatic turn-on is available. Dimensions: 230 x 47 x 171 mm. Features 1-Channel Amplifier Class-D amplifier technology Digital mono amplifier Low Pass Filter Subsonic filter Continuously adjustable phase shift 0–180° RTC Bass Remote Control included RCA high-level input with automatic turn-on Technical Data 1 x 400 W RMS at 4 Ohm 1 x 650 W RMS at 2 Ohm Efficiency up to 84% EQ at 45 Hz, 0–6 dB Dimensions 230 x 47 x 171 mm
Hertz Dpower DPower 1 1-Channel Amplifier Masori
962.44 PLN
The Dpower DPower 1 is a 1-Channel Amplifier from Hertz with an efficient Class D circuit. It delivers 150 W x 1 at 4 Ω and 250 W x 1 at 2 Ω (RMS at 14.4 VDC, THD 1 %) as well as 180 W x 1 at 4 Ω and 300 W x 1 at 2 Ω (RMS at 14.4 VDC, THD 10 %). Adjustable crossovers, a Low-Pass of 50–220 Hz at 12 dB/Oct, and a Bass Boost at 45 Hz of 0–12 dB are integrated. The inputs PRE IN and SPEAKER IN as well as a Pre Out Full are available, with Pre-In sensitivity LO: 0.2–5 V and HI: 0.8–20 V. ART:™ Automatic remote control On/Off and an optional remote volume control (-20 – +6 dB) are provided. The supply voltage is 11–15 VDC, protected by 1 x 20 A; the consumption is 20 A at 2 Ω and 14.4 VDC (max. music power). The maximum dimensions are 222.2 x 160 x 50.5 mm at a weight of 1.61 kg, the THD is 0.1 % (100 Hz @ 4 Ω), the bandwidth is 10–500 Hz, the signal-to-noise ratio is 105 dB, and the damping factor is 100. Features 1-Channel Amplifier Class D circuit PRE IN / SPEAKER IN Pre out Full range: Yes Adjustable crossovers: Yes Lo-Pass: 50–220 Hz @ 12 dB/Oct Bass Boost 45 Hz: 0–12 dB Remote volume control (optional): -20 – +6 dB ART:™ Automatic remote control On/Off Supply voltage: 11–15 VDC Fuse: 1 x 20 A Load impedance (min.): 2 Ω Maximum size: 222.2 x 160 x 50.5 mm Weight: 1.61 kg Technical specifications Channels: 1 Idle current (On): 1 A Idle current (Off): 0.04 mA Consumption @ 2 Ω, 14.4 VDC (max. music power): 20 A Remote input: 4–15 VDC, 1 mA THD (100 Hz @ 4 Ω): 0.1 % Bandwidth (-3 dB): 10–500 Hz Signal-to-noise ratio (A-weighted @ 1 V): 105 dB Damping factor (100 Hz @ 4 Ω): 100 Pre-In sensitivity LO: 0.2–5 V Pre-In sensitivity HI: 0.8–20 V Output power (RMS) @ 14.4 VDC, THD 1 % (4 Ω): 150 W x 1 Output power (RMS) @ 14.4 VDC, THD 1 % (2 Ω): 250 W x 1 Output power (RMS) @ 14.4 VDC, THD 10 % (4 Ω): 180 W x 1 Output power (RMS) @ 14.4 VDC, THD 10 % (2 Ω): 300 W x 1 Total power RMS: 300 W Inputs: PRE IN / SPEAKER IN Pre out Full range: Yes Full Filter: Yes Low-Pass: 50–220 Hz @ 12 dB/Oct BOOST 45 Hz: 0–12 dB Remote volume control (optional): -20 – +6 dB Maximum size: 222.2 x 160 x 50.5 mm Dimension A: 222.2 mm Dimension B: 210.5 mm Dimension C: 160 mm Dimension D: 142 mm Dimension E: 50.5 mm
Hertz DP 1.500 1-Channel Amplifier Masori
767.33 PLN
DP 1.500 is a 1-Channel Amplifier from Hertz featuring Advanced Class-D technology. The compact design includes a status LED, a removable top plate, and a solid machined terminal block. A balanced input circuit as well as Pre-In and Speaker-In are available. Adjustable input levels, a low-pass filter from 50 - 250 Hz with 24 dB/Oct., and a subsonic filter at 25 Hz with 24 dB/Oct. are integrated. The phase is switchable between 0/180°, bass boost at 50 Hz is selectable from 0 - 9 dB, and the SUB Remote Volume Control HRC 02 adjusts from -20 - 6 dB. The minimum load impedance is 2 Ω, and the maximum output power is 590 W. Other specifications include an efficiency of 86%, a bandwidth of 10 Hz - 500 Hz, a signal-to-noise ratio of 99 dBA, and a damping factor of 180. Features 1-Channel Amplifier Advanced Class-D technology Compact design Status LED Removable top plate Solid machined terminal block Balanced input circuit Pre-In and Speaker-In Full-range preamplifier output Adjustable input levels Adjustable crossovers Low-pass OFF / 50 - 250 Hz 24 dB/Oct. Subsonic OFF / 25 Hz 24 dB/Oct. Phase 0 / 180° Bass Boost at 50 Hz 0 - 9 dB SUB Remote Volume Control HRC 02 -20 - 6 dB ART automatic on/off via SPK-IN 1.5 VDC Amplifier Class D Technical Specifications Channels: 1 Minimum load impedance: 2 Ω Nominal supply voltage fuse: 11 - 15 VDC (1 x 30 A) Operating supply voltage: 6.5 - 17.5 VDC No-load current: 1 A Standby current consumption: 50 µA Current consumption at minimum load impedance maximum music power: 21 A Remote IN: 4 - 17 VDC (1 mA) Efficiency: 86 % THD distortion at 100 Hz, 70 % nominal power: 0.2 % Damping factor at 1 kHz, 1 W: 180 Bandwidth at -3 dB: 10 Hz - 500 Hz Signal-to-noise ratio A-weighted at 1 V input: 99 dBA Pre-In sensitivity: 0.32 - 8 VRMS Speaker-In sensitivity: 1.6 - 40 VRMS RMS output power at 1 % THD, 1 channel at 4 Ω: 280 W RMS output power at 1 % THD, 1 channel at 2 Ω: 500 W RMS output power at 14.4 VDC and 10 % THD, 1 channel at 4 Ω: 350 W RMS output power at 14.4 VDC and 10 % THD, 1 channel at 2 Ω: 590 W Total power: 590 W
Soundigital 1000.1 EVOX2 1-Channel Amplifier Masori
2040.57 PLN
The 1000.1 EVOX2 from Soundigital is a 1-Channel Amplifier with 1000 Watts RMS, available in 1-Ohm and 4-Ohm versions. The 1-Ohm version delivers 1 x 1000 Watts RMS at 1 Ω, 1 x 721 Watts RMS at 2 Ω, and 1 x 476 Watts RMS at 4 Ω; the 4-Ohm version delivers 1 x 1000 Watts RMS at 4 Ω. The frequency response (-3 dB) ranges from 5 Hz to 25 kHz, along with an adjustable rumble filter (12 dB/Oct., 5 Hz to 40 Hz), a low-pass filter (12 dB/Oct., 50 Hz to 500 Hz), and a bass boost of 0 dB to 12 dB at 50 Hz. The operating voltage range is 8 V to 16 V, the SNR is 94 dB, and the damping factor (@100 Hz nominal impedance) is >3000. The input sensitivity is 0.2 V to 2 V (RCA) and 1.5 V to 15 V (high level). The overall efficiency is 89% at 1 Ω and 86% at 2 Ω, with a current draw (music) of 44 A at 1 Ω and 45 A at 2 Ω, peaking at 89 A at 1 Ω and 90 A at 2 Ω. Dimensions: 13.6 cm width, 18.1 cm length, 5.4 cm height; weight: 1.12 kg. Connection cross-sections: Power Cable 16 mm², speaker cable 2 x 4.0 mm². Contains patented technologies. Features 1-Channel Amplifier Versions: 1 Ohm and 4 Ohm Frequency response (-3 dB): 5 Hz to 25 kHz Rumble filter (12 dB/Oct.): 5 Hz to 40 Hz Low-pass filter (12 dB/Oct.): 50 Hz to 500 Hz Bass boost: 0 dB to 12 dB at 50 Hz Operating voltage: 8 V to 16 V Signal-to-noise ratio (SNR): 94 dB Damping factor (@100 Hz nominal impedance): >3000 Input sensitivity (RCA): 0.2 V to 2 V Input sensitivity (high level): 1.5 V to 15 V Recommended Fuse (music): 50 A Power Cable: 16 mm² Speaker cable: 2 x 4.0 mm² Width: 13.6 cm Length: 18.1 cm Height: 5.4 cm Weight: 1.12 kg Technical Specifications 1-Ohm version power @ 1 Ω: 1 x 1000 Watts RMS 1-Ohm version power @ 2 Ω: 1 x 721 Watts RMS 1-Ohm version power @ 4 Ω: 1 x 476 Watts RMS 4-Ohm version power @ 4 Ω: 1 x 1000 Watts RMS Current draw (music) @ 1 Ω: 44 A Current draw (music) @ 2 Ω: 45 A Current draw (max.) @ 1 Ω: 89 A Current draw (max.) @ 2 Ω: 90 A Overall efficiency @ 1 Ω: 89 % Overall efficiency @ 2 Ω: 86 %
Soundigital 12000.1 EVOX 1-Channel Amplifier Masori
6371.53 PLN
The 12000.1 EVOX is a 1-Channel Amplifier from Soundigital. The model integrates the RTGP system Thermal Recovery for Power Generation. A dynamic heat dissipation system and dynamic thermal recovery DTR are integrated. A vibration damping device is present. Operating voltage 8–16 V, overall efficiency 76 %, frequency range 5 Hz–500 Hz, damping factor 200, SNR 76 dB, THD+N 0.1 %. Integrated crossovers: HPF 5–30 Hz, LPF 50–500 Hz. Current draw music 627 A, maximum 1253 A, recommended fuse 675 A. Dimensions 53.0 x 22.5 x 7.1 cm. Features 1-Channel Amplifier Model: 12000.1 EVOX Manufacturer: Soundigital Configuration: 1 Ω or 2 Ω RTGP system Thermal Recovery for Power Generation Dynamic heat dissipation Dynamic thermal recovery DTR Vibration damping device Technical Specifications Operating voltage: 8–16 V Overall efficiency: 76 % Damping factor: 200 Frequency range -3 dB: 5–500 Hz SNR: 76 dB Crossover HPF: 5–30 Hz Crossover LPF: 50–500 Hz THD+N 10 % rated power: 0.1 % Current draw music: 627 A Current draw Max: 1253 A Recommended fuse music: 675 A Product dimensions: 53.0 x 22.5 x 7.1 cm Power 12.6 V 4 Ω 1 Ω version: 1 x 5227 WRMS Power 12.6 V 2 Ω 1 Ω version: 1 x 7920 WRMS Power 12.6 V 1 Ω 1 Ω version: 1 x 12000 WRMS Power 14.4 V 4 Ω 1 Ω version: 1 x 5828 WRMS Power 14.4 V 2 Ω 1 Ω version: 1 x 8831 WRMS Power 14.4 V 1 Ω 1 Ω version: 1 x 13380 WRMS Power 12.6 V 4 Ω 2 Ω version: 1 x 7920 WRMS Power 12.6 V 2 Ω 2 Ω version: 1 x 12000 WRMS Power 14.4 V 4 Ω 2 Ω version: 1 x 8831 WRMS Power 14.4 V 2 Ω 2 Ω version: 1 x 13380 WRMS
Audison Prima APK 163 6.5 inch speaker set Masori
1106.64 PLN
Audison Prima APK 163 is a 6.5 inch (16.5 cm) Speaker Set as a three-way system with AP 1 Tweeter, AP 4 Midbass, and AP 6.5 Woofer. Custom, compact passive Crossovers (APCX TW with damping switch 0 dB/+2 dB, APCX MD, APCX WF) are optimized for OEM integration. The AP 1 Tweeter uses an acoustic lens and a 26 mm diaphragm with a wideband surround; the AP 6.5 Woofer features a 32 mm voice coil made of pure copper. Materials include High Density Flux Ferrite in the Woofer, water-repellent treated paper in the Woofer and Midbass, and TELOTON-FIBER in the Tweeter. AP 6.5 and AP 4 have reduced installation depth, TPU edge with flat TripleWave profile, and a compact basket with abrasion and scratch-resistant coating, with the motor secured using damping epoxy glue. The high-current quick-connect terminal on the AP 6.5 with double contact and temperature-resistant cover is integrated. Developed with the KLIPPEL suite; the AP 4 is designed for extended frequency response and high efficiency. Technical specifications: Continuous power 125 W, peak 375 W, sensitivity 93.5 dB, impedance 4 Ohm, frequency response 50–20k, SPL Woofer 89.5 dB. Crossover tuning: Low pass 600 Hz at 6 dB/oct., High pass 3.5 kHz at 6 dB/oct.; Weights: Woofer 0.78 kg, Tweeter 0.04 kg. Features 6.5 inch (16.5 cm) Speaker Set Three-way system: AP 1 Tweeter, AP 4 Midbass, AP 6.5 Woofer Dedicated passive Crossovers: APCX TW with damping switch (0 dB, +2 dB), APCX MD, APCX WF AP 1 Tweeter with acoustic lens and wideband surround AP 6.5 Woofer with high-current quick-connect terminal, double contact, and temperature-resistant cover AP 6.5 Woofer with 32 mm voice coil made of pure copper Water-repellent treated paper cone (AP 6.5 and AP 4), FEM-based profile, optimized with Klippel R&D Scan Vibrometer Reduced installation depth in AP 6.5 and AP 4 TPU edge with flat TripleWave profile (AP 6.5 and AP 4) Compact basket with abrasion and scratch-resistant coating, motor secured with damping epoxy glue Magnet material Woofer: High Density Flux Ferrite Diaphragm material Tweeter: TELOTON-FIBER Developed with the KLIPPEL suite AP 4 with extended frequency response and high efficiency Technical Data Woofer size 165 mm Tweeter size 26 mm Diameter of Woofer voice coil 32 mm Magnet material Woofer High Density Flux Ferrite Cone material Woofer water-repellent treated paper Diaphragm material Tweeter TELOTON-FIBER Power handling peak 375 W Power handling continuous 125 W Sensitivity 93.5 dB Impedance 4 Ohm Frequency response 50–20k Crossover Woofer Low pass 600 Hz, 6 dB/oct. Crossover Tweeter High pass 3.5 kHz, 6 dB/oct. SPL Woofer 89.5 dB Weight Woofer 0.78 kg Weight Tweeter 0.04 kg
ESX Horizon HXE1000.1D 1-Channel Amplifier Masori
498.1 PLN
The ESX Horizon HXE1000.1D is a 1-Channel Amplifier as a Mono Class D Digital Amplifier. It uses a MOSFET-PWM power supply and a triple protection circuit. High-level inputs with Error Protection System are integrated. A massive aluminum heat sink with acrylic glass inlays, a flush-mounted diamond-cut logo, and a base plate with robust mounting brackets are part of the equipment. Auto Turn-On and a compact bass cable remote control are available. The maximum output power is 1000 watts with 1 x 400/900/1100 watts max. at 4/2/1 ohm and 1 x 300/425/550 watts RMS at 4/2/1 ohm. LPF 40-150 Hz, Subsonic 15-35 Hz, Bass Boost 0-12 dB, and Phase Shift 0-180° are adjustable. The dimensions are 220 x 51 x 222 mm, and the efficiency is up to 84%. Features 1-Channel Amplifier Mono Class D Digital Amplifier Massive aluminum heat sink with acrylic glass inlays Flush-mounted diamond-cut logo Base plate with robust mounting brackets Triple protection circuit MOSFET-PWM power supply High-level inputs with Error Protection System Auto Turn-On Compact bass cable remote control Technical Specifications 1000 watts max. output power 1 x 400 watts max. at 4 ohm 1 x 900 watts max. at 2 ohm 1 x 1100 watts max. at 1 ohm 1 x 300 watts RMS at 4 ohm 1 x 425 watts RMS at 2 ohm 1 x 550 watts RMS at 1 ohm LPF 40-150 Hz Subsonic 15-35 Hz Bass Boost 0-12 dB Phase Shift 0-180° Dimensions 220 x 51 x 222 mm Efficiency up to 84%
ESX Quantum QL750.1 24V 1-Channel Amplifier Masori
1276.58 PLN
The ESX Quantum QL750.1 24V is a 1-Channel Amplifier for 24V onboard networks. The Class D design achieves an efficiency of up to 92%. It delivers 750 Watts RMS output power as well as 1 x 500/750 Watts RMS @ 4/2 Ohm. Equipped with a MOSFET-PWM power supply and triple protection circuit. High-level inputs with Error Protection System, Auto Turn-On, and Start/Stop Ready. Subsonic 10-40 Hz, Lowpass 40-150 Hz, Bass-Boost 0-18 dB, Phase Shift 0-180°. Massive aluminum heat sink and heavy side panels made of die-cast aluminum. Compact bass cable remote control and dimensions 226 x 43 x 120 mm. Features 1-Channel Amplifier For 24V onboard networks Mono Class D Digital Amplifier Efficiency up to 92% Massive aluminum heat sink Heavy side panels made of die-cast aluminum High-level inputs with Error Protection System Auto Turn-On, Start/Stop Ready MOSFET-PWM power supply Triple protection circuit Compact bass cable remote control Technical Specifications Total RMS output power: 750 Watts RMS power @ 4 Ohm: 1 x 500 Watts RMS power @ 2 Ohm: 1 x 750 Watts Subsonic: 10-40 Hz Lowpass: 40-150 Hz Bass-Boost: 0-18 dB Phase Shift: 0-180° Dimensions: 226 x 43 x 120 mm
ESX Horizon HXE2000.1Dv2 1-Channel Amplifier Masori
980.1 PLN
The ESX Horizon HXE2000.1Dv2 is a 1-Channel Amplifier in Mono Class D digital design. Equipped with a MOSFET-PWM power supply, triple protection circuit, high-level inputs with Error Protection System, and automatic turn-on function. The filter section includes LPF 40–150 Hz and Subsonic 15–35 Hz, complemented by Bass Boost 0–12 dB and Phase Shift 0–180°. The output power includes 2000 watts max., plus 1 x 800 watts max. @ 4 Ohm, 1 x 1300 watts max. @ 2 Ohm, and 1 x 2000 watts max. @ 1 Ohm, as well as 1 x 400 watts RMS @ 4 Ohm, 1 x 650 watts RMS @ 2 Ohm, and 1 x 1000 watts RMS @ 1 Ohm. The efficiency is up to 83%. On the housing side, there is a massive aluminum heat sink with acrylic glass inserts, a flush-mounted diamond-cut logo, and a base plate with robust mounting brackets, complemented by Master/Slave function and cable remote control for the bass level. Features 1-Channel Amplifier Mono Class D Digital Amplifier MOSFET-PWM power supply Triple protection circuit High-level inputs with Error Protection System Automatic turn-on function Master/Slave function Compact bass cable remote control Massive aluminum heat sink with acrylic glass inserts Flush-mounted diamond-cut logo Base plate with robust mounting brackets Technical Specifications Max. output power: 2000 watts Max. power: 1 x 800 watts @ 4 Ohm Max. power: 1 x 1300 watts @ 2 Ohm Max. power: 1 x 2000 watts @ 1 Ohm RMS power: 1 x 400 watts @ 4 Ohm RMS power: 1 x 650 watts @ 2 Ohm RMS power: 1 x 1000 watts @ 1 Ohm LPF 40–150 Hz Subsonic 15–35 Hz Bass Boost 0–12 dB Phase Shift 0–180° Efficiency up to 83% Dimensions 220 x 51 x 362 mm
ESX Signum SXE2000.1D 1-Channel Amplifier Masori
958.98 PLN
The ESX Signum SXE2000.1D is a 1-Channel Amplifier in Mono Class D Digital design with a MOSFET-PWM power supply and triple protection circuit. The aluminum heat sink with acrylic glass inlays and flush-mounted diamond-cut logo, as well as aluminum frames on the end panels and solid connection terminals, are included. A base plate with robust mounting brackets is integrated. High-level inputs with Error Protection System and Auto Turn-On via high-level inputs are built in. Master/Slave link mode and a compact bass cable remote control are included. Maximum output power is 2000 watts, efficiency up to 84%, dimensions 220 x 53 x 328 mm, low pass 40–150 Hz, subsonic 10–35 Hz, bass boost 0–12 dB, phase control 0–180°. Features 1-Channel Amplifier Mono Class D Digital Amplifier Aluminum heat sink with acrylic glass inlays and flush-mounted diamond-cut logo Aluminum frame on the end panels Solid connection terminals Base plate with robust mounting brackets High-level inputs with Error Protection System Auto Turn-On via high-level inputs MOSFET-PWM power supply, triple protection circuit Master/Slave link mode Compact bass cable remote control Technical Specifications Maximum output power 2000 watts Power max.: 1 x 800 watts @ 4 Ohm Power max.: 1 x 1400 watts @ 2 Ohm Power max.: 1 x 2000 watts @ 1 Ohm RMS power: 1 x 400 watts @ 4 Ohm RMS power: 1 x 700 watts @ 2 Ohm RMS power: 1 x 1000 watts @ 1 Ohm Low pass 40–150 Hz Subsonic 10–35 Hz Bass boost 0–12 dB Phase control 0–180° High-level inputs Automatic turn-on function Master/Slave mode Cable remote control for bass level Dimensions 220 x 53 x 328 mm Efficiency up to 84%
Morel MPS 1.550 1-Channel Amplifier Masori
2337.88 PLN
The Morel MPS 1.550 1-channel amplifier can deliver up to 550 watts RMS of clean power, providing clear and emotional bass. The top-mounted level and filter controls are hidden under a removable chassis plate for easy adjustments. Balanced line inputs with noise suppression can receive signals from most sources, including high-level inputs up to 20 volts on mono channels. Other features include automatic turn-on signal detection and DC offset detection, making the MPS amplifiers suitable for integration into factory audio systems. Features 1-channel mono subwoofer amplifier 350 watts RMS x 1 at 4 ohms (550 watts RMS x 1 at 2 ohms) Class-D amplifier technology 100 dB signal-to-noise ratio Only 0.15% distortion Variable low-pass filter (40-220 Hz, 12 dB/octave) Variable bass boost (0-12 dB at 45 Hz) Switchable subsonic filter (off, 25, 35 Hz) Optional wired level remote MPS-R1 available soon Preamp and speaker inputs Speaker level inputs require adapters from speaker wire to RCA Speaker inputs with DC offset or signal sensing for turn-on Wiring, fuse, and hardware not included with the amplifier 20mm² power and ground cables and a 50-amp fuse are recommended Dimensions 23.8cm x 5.4cm x 17.1cm Scope of delivery Morel MPS 1.550 user manual Mono subwoofer amplifier Four 5/8 inch screws Two M4x4mm machine screws (replacement screws for the top plate) 2mm Allen key 2.5mm Allen key 4mm Allen key User manual
Gladen RC 1800C1 1-Channel Amplifier Masori
1616.52 PLN
The Gladen RC 1800C1 is a 1-Channel Amplifier of the Class-D category. It operates as a mono amplifier with high-level auto sense. The circuit is based on double side PCB with SMD components. An optional remote control module is available. The frequency range is from 10 Hz to 220 Hz, the low pass filter is from 40 Hz to 220 Hz, and the subsonic filter is from 20 Hz to 50 Hz. The bass boost is adjustable from 0 dB to 12 dB. The input sensitivity ranges from 200 mV to 5 V. The dimensions are 415 mm x 150 mm x 50 mm. Features 1-Channel Amplifier Class-D High-Level with Auto Sense Double Side PCB with SMD components Optional Remote Control Module Technical Specifications RMS Power, 4 Ohm: 740 Watts RMS Power, 2 Ohm: 1300 Watts RMS Power, 1 Ohm: 1800 Watts Frequency Range: 10 Hz to 220 Hz Low Pass Filter: 40 Hz to 220 Hz Subsonic: 20 Hz to 50 Hz Bass Boost: 0 dB to 12 dB Input Sensitivity: 200 mV to 5 V T.H.D. @ RMS Watts: < 1.0 % Dimensions: Length 415 mm x Width 150 mm x Height 50 mm
Gladen RC 3200C1 1-Channel Amplifier Masori
2423.35 PLN
The Gladen RC 3200C1 is a 1-Channel Amplifier in CLASS-D. It features a Low Pass Filter from 40 - 220 Hz and a Subsonic Filter from 20 - 50 Hz. A Bass Boost of 0 - 12 dB in the range of 30 - 80 Hz with adjustable quality is integrated. The RMS power is 700 Watts at 4 Ohms, 1300 Watts at 2 Ohms, 2150 Watts at 1 Ohm, and 3180 Watts at 0.5 Ohms. Clipping Limiter (switchable), level remote control included, and Master-Slave capable. Low Level input up to 5 Volts and input sensitivity 200 mV - 5 V. Frequency range 10 Hz - 220 Hz and T.H.D. @ RMS Watts < 2.0 %. Protection circuit against overheating, overload, short circuit, and undervoltage. Dimensions 585 mm x 150 mm x 50 mm. Features 1-Channel Amplifier Mono Amplifier CLASS-D Low Pass Filter 40 - 220 Hz Subsonic Filter 20 - 50 Hz Bass Boost 0 - 12 dB, 30 - 80 Hz (with adjustable quality) Low Level input up to 5 Volts Clipping Limiter (switchable) Level remote control included Master-Slave capable Protection circuit against overheating - overload - short circuit - undervoltage Technical Specifications RMS power 4 Ohms: 700 Watts RMS power 2 Ohms: 1300 Watts RMS power 1 Ohm: 2150 Watts RMS power 0.5 Ohm: 3180 Watts Frequency range: 10 Hz - 220 Hz T.H.D. @ RMS Watts: < 2.0 % Input sensitivity: 200 mV - 5 V Dimensions: Length 585 mm x Width 150 mm x Height 50 mm
Gladen RC 1200C1 1-Channel Amplifier Masori
1107.05 PLN
RC 1200C1 is a 1-Channel Amplifier from Gladen with CLASS-D technology. The RMS power is 400 Watts at 4 Ohms, 650 Watts at 2 Ohms, and 1120 Watts at 1 Ohm. High-Level with Auto Sense is integrated. It features Double Side PCB and SMD components. An optional Remote-Control module is available. The signal-to-noise ratio is over 100 dB, the frequency range is from 10 Hz to 220 Hz, the Low Pass Filter is from 40 Hz to 220 Hz, and the Subsonic Filter is from 20 Hz to 50 Hz. Bass Boost is adjustable from 0 to 12 dB, and the input sensitivity ranges from 200 mV to 5 V. T.H.D. @ RMS Watts is less than 2.0%, and the dimensions are 285 mm x 150 mm x 50 mm. Features 1-Channel Amplifier Mono Amplifier CLASS-D High-Level with Auto Sense Double Side PCB and SMD components Optional Remote-Control module Technical Specifications RMS power 4 Ohms: 400 Watts RMS power 2 Ohms: 650 Watts RMS power 1 Ohm: 1120 Watts Signal-to-noise ratio: > 100 dB Frequency range: 10 Hz - 220 Hz Low Pass Filter: 40 Hz - 220 Hz Subsonic Filter: 20 Hz - 50 Hz Bass Boost: 0 - 12 dB Input sensitivity: 200 mV - 5 V T.H.D. @ RMS Watts: < 2.0 % Dimensions Length: 285 mm x Width: 150 mm x Height: 50 mm
Audison Prima APBX 8 AS2 8 Inch Active Enclosure Subwoofer
1914.35 PLN
Audison Prima APBX 8 AS2 is an 8-inch (20 cm) active enclosure subwoofer with an integrated 250 Watt RMS 0.4 Ohm2 D-Class Amplifier with he-li technology. The DBT technology of the input stage, a Butterworth low-pass filter with 12 dB/Oct. and a variable cutoff frequency of 50 to 300 Hz, as well as phase control from 0 to 180 degrees and adjustable bass boost from 0 to 6 dB at 45 Hz are integrated. The air-suspended enclosure with a low profile of 158 mm, 2S² design for down-firing or up-firing, SSP terminal block with plug & play, and downward-facing leveling feet with Velcro inserts are included. High-level audio input via multi-pole connection and low-level via RCA, as well as the ART turn-on function selectable between remote-in, hi-level, and audio signals. Rounded corners, a sturdy metal grille, and the HRC AP remote control are included. Driver size 200 mm, continuous power handling 250 W, peak power handling 500 W, magnet material high density flux ferrite, and water-repellent pressed paper cone. Dimensions 368 mm length, 294 mm width, 135 mm height. Exclusive design of the geometry of the cone, dust cap, and basket to achieve a linear excursion of 9 mm in one direction. Features 8-inch (20 cm) active enclosure subwoofer Integrated 250 Watt RMS 0.4 Ohm2 D-Class Amplifier with he-li technology, without switch-mode power supply DBT technology Dynamic Bass Tracking of the input stage Butterworth low-pass filter Defeatable filters for using the sub-dedicated output of a Bit or AP-Bit processor High-level audio input via multi-pole connection and low-level via RCA ART turn-on function Automatic Remote Turn-On selectable between remote-in, hi-level, and audio signals Air-suspended box with low profile 158 mm 2S² design down-firing or up-firing SSP terminal block Sub Smart Plug with plug & play connector Downward-facing leveling feet with Velcro inserts Rounded corners Includes HRC AP remote control Sturdy metal grille included Technical Specifications Driver size 200 mm Continuous power handling 250 W Peak power handling 500 W Butterworth low-pass filter 12 dB/Oct. Cutoff frequency 50–300 Hz Phase control 0–180° Bass boost 0–6 dB at 45 Hz Magnet material high density flux ferrite Cone material water repellent pressed paper Linear excursion 9 mm one-sided Dimensions L 368 mm, W 294 mm, H 135 mm Enclosure profile 158 mm
Audio System Carbon 500.1 D 1-Channel Amplifier Masori
852.24 PLN
The Carbon 500.1 D from Audio System is a digital 1-Channel Mono Amplifier from the CARBON series. It achieves an efficiency of up to 84 percent and features a Low Pass Filter as well as a Subsonic filter. The phase shift is continuously adjustable from 0 to 180 degrees. The output power is 350 Watts RMS at 4 Ohms and 500 Watts RMS at 2 Ohms. An RCA high-level input with automatic turn-on function is integrated. Additionally, there is an equalizer at 45 Hz for adjustment between 0 and 12 dB. The dimensions of the device are 210x51x176 mm. An RTC remote control is included. Features 1-Channel Amplifier CARBON SERIES Digital Mono Amplifier Low Pass Filter Subsonic filter Continuously adjustable 0-180 degree phase shift Efficiency up to 84 percent RTC included RCA high-level input with automatic turn-on EQ at 45 Hz 0 – 12 dB Power: 350 Watts RMS at 4 Ohms Power: 500 Watts RMS at 2 Ohms Dimensions: 210x51x176 mm