Masori.de: Akcesoria do samochodow
Najlepszy
Hifonics Zeus ZXO2 Crossover Masori
343.05 PLN
The Hifonics Zeus ZXO2 is a Crossover pair with a 12 dB filter slope. The system is switchable for 2- or 3-way operation and is prepared for 3-way operation. The crossover frequency is 3300 Hz at an impedance of 4 Ohms. A high-frequency level switch allows for +3 dB, 0 dB, or -3 dB. The power handling is 125 W RMS and 250 W Max. Features Crossover (Pair) Switchable 2/3-way Prepared for 3-way operation High-frequency level switch +3 dB / 0 dB / -3 dB Technical Specifications Crossover frequency 3300 Hz Impedance 4 Ohms RMS power 125 W Max power 250 W Filter slope 12 dB
Top Pick
Comfort Mat Carpet Upholstery Fabric Masori
1536.76 PLN
Carpet product is a Covering Fabric from Comfort Mat with a self-adhesive backing and lint-free surface. The design is robust. The width is 100 cm with a roll length of 10 m. The thickness is 3 mm. The surface weight is 530 g/m2. Available in black or gray. Features Covering Fabric Self-adhesive Lint-free surface Robust design Technical Data Width: 100 cm Roll length: 10 m Thickness: 3 mm Weight: 530 g/m2 Color: Black or Gray
Doskonały
Audison Prima AP T-H MBP01 Amplifier Accessories Masori
163.51 PLN
Audison Prima AP T-H MBP01 is an Amplifier Accessory with T wiring harness for Plug&Play integration in Porsche or Mercedes-Benz. It supports maximum OEM integration and connection to the AP extension cable via ISO Plug. Through the Audison Prima DCC solution, there is the possibility to power the amplifier directly from the cockpit. An ACC wire allows for the reactivation of the ignition key signal to turn an external device on and off. The Plug does not ensure the connection of optical wires; these must be disconnected from the OEM Plug and connected to the AP T wiring harness. For vehicles with ignition key connection cable (ACC cable), see compatibility list. Features Amplifier Accessory T wiring harness Plug&Play integration in Porsche or Mercedes-Benz Maximum OEM integration Connection to AP extension cable via ISO Plug Possibility to power the amplifier from the cockpit with Audison Prima DCC solution ACC wire for reactivating the ignition key signal Plug does not ensure the connection of optical wires Disconnect optical wires from the OEM Plug and connect to the AP T wiring harness Vehicles with ignition key connection cable (ACC cable): see compatibility list
Polecany
Audison Prima AP H ASD BYPASS Amplifier Accessories Masori
133.75 PLN
Prima AP H ASD BYPASS is an Amplifier Accessories from Audison. The Bypass Plug & Play wiring harness is designed for BMW and bridges the ASD module inputs or iDrive outputs. The signals are routed to the HiFi/HK (674) OEM amplifier inputs. Tailored for MOST/digital HK OEM amplifiers. The bypass wiring harness allows the ASD module to output no signal. Features Amplifier Accessories Bypass Plug & Play wiring harness For BMW Bridges ASD module inputs or iDrive outputs Signal forwarding to HiFi/HK (674) OEM amplifier inputs For MOST/digital HK OEM amplifiers ASD module without signal output
Wyróżniony
Rockford Fosgate HD9813RG-STAGE2 Harley-Davidson Motorcycle-
8367.25 PLN
HD9813RG-STAGE2 is a Harley-Davidson Motorcycle Complete Set from Rockford Fosgate for selected Road Glide models from 1998 to 2013. Included are the PMX-HD9813 Digital Media Receiver as a replacement for 1998–2013 models, two TMS6RG 6.5 inch 2-way Element-Ready speakers with phase-aligned 25 mm Tweeter and Road Glide Grille, as well as the TM400X4ad Power Marine 400 Watt Class-ad 4-channel Amplifier. The installation uses factory mounting points without drilling or cutting, the radio integration supports front/rear fader control, and Direct Connect wiring harnesses for Harley-Davidson models are provided. The package includes the RFK-HD9813 amplifier wiring kit, a wiring harness kit, a hardware package, and Grille/trim rings. Compatibility includes Road Glide (1998–2013, Shark Nose, FLTR) and Road Glide Custom (2012, Shark Nose, FLTRX). Shipping weight 8.84 kg. 2 years Warranty. Features Harley-Davidson Motorcycle Complete Set Compatible with Road Glide 1998–2013 (Shark Nose, FLTR) Compatible with Road Glide Custom 2012 (Shark Nose, FLTRX) No drilling or cutting required Mounting on factory mounting points Radio integration with front/rear fader control Direct Connect wiring harnesses for Harley-Davidson models PMX-HD9813 Digital Media Receiver (replacement for Harley-Davidson 1998–2013) TMS6RG 6.5 inch 2-way Element-Ready speakers with phase-aligned 25 mm Tweeter and Road Glide Grille TM400X4ad Power Marine Amplifier RFK-HD9813 Road Glide & Street Glide amplifier wiring kit (1998–2013) Grille/trim ring included Includes mounting materials (1) PMX-HD9813 source unit (2) TMS6RG speakers (2) 1998–2013 Road Glide Grilles (1) TM400X4ad Amplifier (1) RFK-HD9813 amplifier mounting kit (1) wiring harness kit (1) hardware package 2 years Warranty Technical Specifications Total power 400 Watts Amplifier 4-channel Amplifier class Class-ad Amplifier type External Number of speakers 2 Speaker size 165 mm Tweeter 25 mm Shipping weight 8.84 kg
Alternatywa
ACV LFB Fiat ISO Steering Wheel Remote Control Masori
257.23 PLN
The ACV LFB Fiat ISO is a Steering Wheel Remote Control for vehicles with VAN Bus and ISO connection. It is suitable for the Fiat Ulysse (ZAF 179) from 09/2002 to 01/2008. Designed for vehicles with Clarion RD3 PU2471 OEM device. Not for vehicles with JBL sound system. Provided signal: LFB. Connection cables for the following radio manufacturers: Alpine 42ctalpinelead, Parrot 42ctasteroidlead, Bosch-Blaupunkt from 2010 42ctblaupunktlead, Blaupunkt/China HU/Kenwood 42ctchinahulead, Clarion 42ctclarionlead, JVC 42ctjvclead, Kenwood 42ctkenwoodlead, Multilead various devices 42ctmultilead, Panasonic 42ctpanasoniclead, Blaupunkt/Kenwood/Pioneer 42ctpioneerlead, Blaupunkt/Kenwood/Sony 42ctsonylead, XZent/Zenec 42ctzeneclead. Features Steering Wheel Remote Control VAN Bus Connection: ISO Vehicle compatibility: Fiat Ulysse (ZAF 179) 09/2002 - 01/2008 Vehicles with Clarion RD3 PU2471 OEM device Vehicles without JBL sound system Provided signals: LFB Technical Data Connection cable Alpine: 42ctalpinelead Connection cable Parrot: 42ctasteroidlead Connection cable Bosch-Blaupunkt from 2010: 42ctblaupunktlead Connection cable Blaupunkt/China HU/Kenwood: 42ctchinahulead Connection cable Clarion: 42ctclarionlead Connection cable JVC: 42ctjvclead Connection cable Kenwood: 42ctkenwoodlead Connection cable Multilead various devices: 42ctmultilead Connection cable Panasonic: 42ctpanasoniclead Connection cable Blaupunkt/Kenwood/Pioneer: 42ctpioneerlead Connection cable Blaupunkt/Kenwood/Sony: 42ctsonylead Connection cable XZent/Zenec: 42ctzeneclead
Four Connect Stage2 20mm² OFC Ultra-Flex Meterware Power Cable
48.92 PLN
The Four Connect Stage2 Ultra-Flex OFC Power Cable features a cross-section of 20mm2 and is made from 99.99 percent oxygen-free copper. The insulation is made from a silicone-based rubber that retains its flexibility even in cold climates. All STAGE2 cables use a twisted bundle structure to reduce interference from surrounding electronic devices. The strand construction is very finely structured at 0.15mm2 to ensure low internal resistance. The cable is available as bulk material with a maximum length of 50 meters in one piece. It is designed for amplifier power up to approximately 1500 watts RMS and is available in red or gray. Features 20mm2 Power Cable Material: 99.99 percent oxygen-free copper (OFC) Cross-section: 20mm2 Ultra-Flex insulation made from silicone-based rubber Twisted bundle structure 0.15mm2 strand construction Power: 1500 watts RMS Color options: Red or Gray Bulk material (up to 50 meters in one piece)
Musway BTA2 Amplifier Accessories Masori
384.74 PLN
The Musway BTA2 is an Amplifier Accessory designed as a Bluetooth dongle for HD audio streaming and DSP control. The connection is made via USB to the DSP Amplifier, and the Bluetooth input can be selected via software or with the optional remote control DRC1. An integrated Bluetooth receiver is included. Compatible with Musway TUNE12, DSP68, M6v3, M4+v3, D8v3, and M12. The MUSWAY Tunest app for iOS and Android allows for configuration and control. An illuminated MUSWAY logo and a USB connection cable are integrated. Dimensions 32 x 10 x 60 mm. Features Amplifier Accessories Bluetooth dongle for HD audio streaming and DSP control Integrated Bluetooth receiver Compatible with Musway TUNE12, DSP68, M6v3, M4+v3, D8v3, M12 Illuminated MUSWAY logo Includes USB connection cable Technical Data USB connection on the DSP Amplifier Bluetooth input selectable via software or optional remote control DRC1 MUSWAY Tunest app for iOS and Android for configuration and control Dimensions 32 x 10 x 60 mm
Four Connect Stage5 5m 2-Channel 5m RCA Cable Masori
554.47 PLN
Stage5 5m 2-Channel is a 5m RCA Cable from Four Connect with 2-Channel (2x Mono) Stereo RCA. The length is 5 m. The conductor cross-section of the inner conductors is 2 x 0.40 mm² copper. The construction is triple-shielded as a very tightly twisted twisted-pair construction with OFC wire mesh shielding. The plugs are insulated with highly insulating HDPE plastic and feature a screw lock. Each connector is tested for tensile strength during quality control. An H.D.P.E. core wire sheath and an air-floating core wire structure are integrated. The SE sheath is made of polyvinyl chloride with a particularly soft grip, and the outer diameter is 8.5 mm. Features 5m RCA Cable 2-Channel (2x Mono) High End Stereo RCA Length: 5 m 2 x 0.40 mm² inner conductors made of copper Triple-shielded, very tightly twisted twisted-pair construction OFC wire mesh shielding Plugs with HDPE insulation and screw lock SE sheath made of polyvinyl chloride with a particularly soft grip Outer diameter: 8.5 mm Technical Data H.D.P.E. core wire sheath Air-floating core wire structure Connectors tested for tensile strength (quality control)
Four Connect Stage2 10mm² OFC Ultra-Flex 10mm² Power Cable
963.53 PLN
Four Connect Stage2 10mm² OFC Ultra-Flex 50m is a 10mm² Power Cable from the manufacturer Four Connect. The conductor is made of 99.99% oxygen-free copper (OFC) with a very fine 0.15 mm² stranded construction. The insulation made of silicone-based rubber remains flexible even in cold climates and does not become brittle. A twisted bundle structure is integrated. The length is 50 m. Colors: red or gray. Designed for amplifier power up to approximately 1000 Watts RMS. Features 10mm² Power Cable Material: 99.99% oxygen-free copper (OFC) 10mm² cross-section 50 m length Color: red or gray Ultra-flexible Insulation: silicone-based rubber Twisted bundle structure For amplifier power up to approximately 1000 Watts RMS Technical Data Stranded construction: 0.15 mm² Maximum length in one piece: 50 m Insulation property: not brittle in cold climates Cable construction: twisted bundle structure
Four Connect Stage5 2.5m 2-Channel 2.5m RCA Cable Masori
427.09 PLN
Stage5 2,5m 2-Channel is a 2.5m RCA Cable from Four Connect with 2 channels (2x Mono) in stereo RCA configuration. The conductor cross-section is 2 x 0.40 mm² copper. The construction is triple-shielded as tightly twisted twisted pair with OFC wire mesh shielding. The plugs are insulated with high-insulating HDPE plastic and feature a screw lock. Each connector is tested for tensile strength. The structure includes an H.D.P.E. core wire jacket and an air-floating core wire structure. The SE jacket is made of polyvinyl chloride with a particularly soft grip. Outer diameter 8.5 mm. Uses thicker than usual tinned OFC conductors. Features 2.5m RCA Cable 2-Channel (2x Mono) Stereo RCA Triple-shielded, tightly twisted twisted-pair construction Plugs with HDPE insulation Screw lock on the plugs H.D.P.E. core wire jacket Air-floating core wire structure OFC wire mesh shielding SE jacket made of polyvinyl chloride with a particularly soft grip Quality control: connectors tested for tensile strength Thicker than usual tinned OFC conductors Technical Data Length: 2.5 m Channels: 2 (2x Mono) Inner conductor: 2 x 0.40 mm² copper Outer diameter: 8.5 mm
Hifonics HF-SC2 / ISO High-Low Adapter Masori
172.14 PLN
Hifonics HF-SC2 / ISO is a High-Low Adapter with 2 channels and summing function. The adapter features 2 high-level inputs up to 10 V RMS as well as 2 RCA outputs (unbalanced) with 5 V RMS. It includes an automatic turn-on function, remote out, start/stop ready, EPS protection circuit, and a floating ground connection that can be activated via a jumper. The signal-to-noise ratio is >115 dB, the transmission frequency is 5–60 kHz, and THD+N is 0.001%. High input up to 10 V RMS corresponds to 25/50 watts RMS at 4/2 ohms, designed for connection to car radios with up to 50 watts RMS per channel at 2 ohms. ISO wiring harness for power and speakers with a length of 30 cm; dimensions 82 x 25 x 65/72 mm. Features High-Low Adapter 2-channel high-to-low converter with summing function Automatic turn-on function Remote out Start/stop ready EPS protection circuit Floating ground jumper ISO wiring harness for power and speakers, 30 cm Technical Specifications 2 x high-level input up to 10 V RMS 2 x RCA output (unbalanced) with 5 V/RMS Noise ratio >115 dB Transmission frequency 5–60 kHz THD+N 0.001% High input up to 10 V RMS Corresponds to 25 watts RMS at 4 ohms Corresponds to 50 watts RMS at 2 ohms Designed for car radios up to 50 watts RMS per channel at 2 ohms Dimensions 82 x 25 x 65/72 mm
GS Audio 36-Cell LTO Battery Pack 120Ah Lithium-LTO
9348.63 PLN
The 36 cells LTO prismatic battery pack 120Ah from GS Audio is a Lithium - LTO battery that consists of 36 prismatic individual cells. The recommended operating voltage is between 14.4 and 15 V, with the system designed for power outputs of 10,000 to 12,500 Watts RMS. Each individual cell of the model GS - 20 LTO has dimensions of 108 x 116 x 22 mm and a weight of 0.520 kg. The nominal voltage per cell is 2.4 Volts with an internal resistance of less than 0.5 mOhm. The battery pack is specified for operating temperatures from -30 °C to +70 °C. Constant current and constant voltage are used as charging methods. Features Lithium - LTO Capacity: 120Ah 36 prismatic cells Recommended voltage: 14.4-15 V Power: 10,000-12,500 Watts RMS Individual cell model: GS - 20 LTO Dimensions of individual cell: 108 x 116 x 22 mm Weight of individual cell: 0.520 kg Volume of individual cell: 0.26 l Technical Data Nominal voltage of individual cell: 2.4 Volts Nominal charge current: 40 A Nominal discharge current: 40 A Maximum charge current: 100 A Maximum discharge current: 20C = 400 A Connection thread: M5 Internal resistance: <0.5 mOhm Optimal operating temperature: -25/+55 °C Maximum operating temperature: -30/+70 °C Maximum voltage: 16.2 V Minimum voltage: 10.2 V
Gladen Ext4HLIN Amplifier Accessories Masori
197.43 PLN
Ext4HLIN is an Amplifier Accessories from Gladen as an expansion card for PICO 8 12 DSP. It provides four additional high-level/analog inputs with load resistance. The connection is made via Card 1 (ext.) to open ends. Features Amplifier Accessories Expansion card for PICO 8 12 DSP Four additional high-level/analog inputs with load resistance Connection Card 1 (ext.) to open ends
Four Connect Stage2 20mm² OFC Ultra-Flex 20mm² Power Cable
1830.43 PLN
Stage2 20mm² OFC Ultra-Flex 50m is a 20mm² Power Cable from Four Connect made of 99.99% oxygen-free copper. The insulation is made of silicone-based rubber. A twisted bundle structure increases flexibility and reduces interference induced by surrounding electronic devices. The length is 50 m in one piece with a cross-section of 20 mm². The very fine 0.15 mm² stranded construction and the Ultra-Flex design are present. Designed for amplifier power up to approximately 1500 Watts RMS. Available in red or gray. Features 20mm² Power Cable Material: OFC, 99.99% oxygen-free copper Cross-section: 20 mm² Length: 50 m in one piece Color: red or gray Ultra flexible Amplifier power up to approximately 1500 Watts RMS Technical Data Insulation: silicone-based rubber Twisted bundle structure Stranded construction: very fine, 0.15 mm² Not brittle in cold climates Reduction of induced interference from surrounding electronic devices
GS Audio 24-Cell LTO Battery Pack 80Ah Lithium-LTO Masori
6376.32 PLN
The 24 cell LTO prismatic battery pack 80Ah from GS Audio is a Lithium - LTO battery pack. It consists of 24 prismatic cells of model GS - 20 LTO and has a capacity of 80Ah. The recommended operating voltage is set in a range of 14.4 to 15 volts. The system is designed for applications of 7000 to 8000W RMS. Two different housing dimensions are available in a long and a narrow variant. The internal resistance of the individual cells is below 0.5 mOhm. Features Lithium - LTO Consisting of 24 prismatic cells Model GS - 20 LTO Capacity: 80Ah 7000-8000W RMS Dimensions Long: 90x690x110mm Dimensions Narrow: 120x540x110mm Internal resistance: less than 0.5 mOhm Technical Data Nominal voltage per cell: 2.4 volts Dimensions per cell: 108 x 116 x 22 mm Weight per cell: 0.520 kg Volume per cell: 0.26 l Nominal charge current: 40 A Nominal discharge current: 40 A Maximum charge current: 100 A Maximum discharge current: 400A (20C) Connection thread: M5 Optimal operating temperature: -25 to +55 °C Maximum operating temperature: -30 to +70 °C Charging method: Constant current and voltage Maximum voltage: 16.2 V Minimum voltage: 10.2 V Recommended voltage: 14.4-15 V
Hifonics HF-SC2 / ISO High-Low Adapter Masori
201.8 PLN
Hifonics HF-SC2 / ISO is a High-Low Adapter with 2 channels and summing function. The adapter features 2 high-level inputs up to 10 V RMS as well as 2 RCA outputs (unbalanced) with 5 V RMS. It includes an automatic turn-on function, remote out, start/stop ready, EPS protection circuit, and a floating ground connection that can be activated via a jumper. The signal-to-noise ratio is >115 dB, the transmission frequency is 5–60 kHz, and THD+N is 0.001%. High input up to 10 V RMS corresponds to 25/50 watts RMS at 4/2 ohms, designed for connection to car radios with up to 50 watts RMS per channel at 2 ohms. ISO wiring harness for power and speakers with a length of 30 cm; dimensions 82 x 25 x 65/72 mm. Features High-Low Adapter 2-channel high-to-low converter with summing function Automatic turn-on function Remote out Start/stop ready EPS protection circuit Floating ground jumper ISO wiring harness for power and speakers, 30 cm Technical Specifications 2 x high-level input up to 10 V RMS 2 x RCA output (unbalanced) with 5 V/RMS Noise ratio >115 dB Transmission frequency 5–60 kHz THD+N 0.001% High input up to 10 V RMS Corresponds to 25 watts RMS at 4 ohms Corresponds to 50 watts RMS at 2 ohms Designed for car radios up to 50 watts RMS per channel at 2 ohms Dimensions 82 x 25 x 65/72 mm
Four Connect Stage2 10mm² OFC Ultra-Flex Meter Cable 10mm² Power Cable
979.01 PLN
Stage2 10mm² OFC Ultra-Flex Power Cable from Four Connect is a power cable with a cross-section of 10mm². The conductors are made of 99.99 percent oxygen-free copper. An insulation made of silicone-based rubber protects the twisted bundle structure of the STAGE2 power and grounding cables. The strand construction is very fine at 0.15mm². This cable is available as bulk material in the colors red or gray. The maximum length in one piece is 50 meters. It is designed for amplifier power of up to about 1000 watts RMS. Features 10mm² Power Cable Material: OFC 99.99 percent oxygen-free copper Ultra flexible Bulk material Color: Red or gray 10mm² cross-section 0.15mm² strand construction Power: Up to about 1000 watts RMS Maximum length in one piece: 50 meters Insulation: Silicone-based rubber Structure: Twisted bundle structure
Akcesoria do samochodow Masori.de najlepsze produkty
Four Connect Stage2 20mm² OFC Ultra-Flex Meterware Power Cable
1828.06 PLN
The Four Connect Stage2 Ultra-Flex OFC Power Cable features a cross-section of 20mm2 and is made from 99.99 percent oxygen-free copper. The insulation is made from a silicone-based rubber that retains its flexibility even in cold climates. All STAGE2 cables use a twisted bundle structure to reduce interference from surrounding electronic devices. The strand construction is very finely structured at 0.15mm2 to ensure low internal resistance. The cable is available as bulk material with a maximum length of 50 meters in one piece. It is designed for amplifier power up to approximately 1500 watts RMS and is available in red or gray. Features 20mm2 Power Cable Material: 99.99 percent oxygen-free copper (OFC) Cross-section: 20mm2 Ultra-Flex insulation made from silicone-based rubber Twisted bundle structure 0.15mm2 strand construction Power: 1500 watts RMS Color options: Red or Gray Bulk material (up to 50 meters in one piece)
GS Audio 60-Cell LTO Battery Pack 200Ah Lithium-LTO
14446.23 PLN
The 60 cell LTO prismatic battery pack 200Ah from GS Audio is an energy storage system based on Lithium-LTO technology. It consists of 60 prismatic cells and has a total capacity of 200Ah. The recommended operating voltage is between 14.4V and 15V. The system is designed for applications in the range of 17500 to 20000W RMS. The individual cells of type GS - 20 LTO have an internal resistance of less than 0.5 mOhm. Each cell has dimensions of 108 x 116 x 22 mm with a weight of 0.520 kg. Features Lithium - LTO 60 prismatic cells 200Ah capacity Power: 17500-20000W RMS Dimensions of individual cell: 108 x 116 x 22 mm Weight of individual cell: 0.520 kg Volume of individual cell: 0.26 l Connection thread M5 Technical Data Recommended voltage: 14.4-15V Nominal voltage of individual cell: 2.4 volts Maximum voltage: 16.2 V Minimum voltage: 10.2 V Nominal charge current: 40 A Nominal discharge current: 40 A Maximum charge current: 100 A Maximum discharge current: 400 A (20C) Internal resistance: less than 0.5 mOhm Optimal operating temperature: -25 to +55 °C Maximum operating temperature: -30 to +70 °C Charging method: Constant current and constant voltage
Audison Prima AP 260P&P I/O Amplifier Accessories Masori
257.03 PLN
Audison Prima AP 260P&P I/O is Amplifier Accessories with Plug&Play connections for AP-Bit amplifiers. The input/output configuration with In/Out dual connector transmits input and output signals, also to the factory audio system when used with AP speaker output cables. Built with twisted cables and cut-resistant shield. High flexibility. Three lengths: 1.6 m, 2.6 m, and 5.6 m. No soldering required. Available as input only or input/output. Features Amplifier Accessories Plug&Play connections Input/Output (I/O) with In/Out dual connector Built with twisted cables Cut-resistant shield High flexibility Three lengths: 1.6 m, 2.6 m, 5.6 m No soldering required For Audison AP-Bit amplifiers Forwarding the output signal of the AP-Bit amplifiers to the factory audio system in conjunction with AP speaker output cables
Audison Prima AP 560P&P I/O Amplifier Accessories Masori
427.12 PLN
The Prima AP 560P&P I/O from Audison is an Amplifier Accessories in the form of an ISO extension cable with a length of 560 cm. It features Plug&Play connections. It is designed for the positioning of AP-Bit amplifiers and offers two extension typologies: input only and input/output. The design allows for the transmission of the output signal of an AP-Bit amplifier to the factory audio system. 560 cm is equivalent to 5588 mm. Features Amplifier Accessories ISO extension cable Length 560 cm (equivalent to 5588 mm) Plug&Play connections Two extension typologies: input only and input/output Transmission of the output signal of the AP-Bit amplifier to the factory audio system Designed for the positioning of AP-Bit amplifiers
Hifonics HF-SC4 / ISO High-Low Adapter Masori
266.87 PLN
The Hifonics HF-SC4 / ISO is a High-Low Adapter with 4 channels and an integrated summing function. The MIXED function via switch generates a full-range signal at the outputs. Auto Turn On, Remote Out, and Start Stop capabilities are integrated. EPS protection circuit and a floating ground that can be activated via jumper are available. The 4 x RCA outputs (unbalanced) deliver 5 V RMS, while the 4 x high-level inputs handle up to 10 V RMS; the signal-to-noise ratio is 115–121 dB, the transmission frequency is 5–60 kHz, and THD+N is 0.001%. An ISO wiring harness for power and speakers with a length of 30 cm and dimensions of 97 x 25 x 75/82 mm are specified. High Input up to 10 V RMS corresponds to 25 W RMS at 4 Ohm and 50 W RMS at 2 Ohm. Features High-Low Adapter 4-channel high to low level converter with summing function MIXED function via switch Automatic turn-on function Remote Out Start Stop capable EPS protection circuit Floating ground jumper 4 x RCA output (unbalanced) with 5 V RMS 4 x high-level input up to 10 V RMS ISO wiring harness for power and speakers, 30 cm Technical Specifications THD+N 0.001% Signal-to-noise ratio 115–121 dB Transmission frequency 5–60 kHz High Input up to 10 V RMS corresponds to 25 W RMS at 4 Ohm High Input up to 10 V RMS corresponds to 50 W RMS at 2 Ohm Dimensions 97 x 25 x 75/82 mm
ESX QSC7 Damping Masori
554.88 PLN
QSC7 is a Damping from ESX made of Quantum acoustic foam with a smooth, self-adhesive surface. The material thickness is 7.0 mm and can be compressed down to 1.0 mm. The set includes 10 panels measuring 700 x 500 mm, totaling 3.5 sqm. Features Damping Quantum acoustic foam Smooth structure Self-adhesive Technical Data Thickness: 7.0 mm Compressible to: 1.0 mm Number of panels: 10 Panel size: 700 x 500 mm Total area: 3.5 sqm
Hifonics HF-SC6 High-Low Adapter Masori
274.06 PLN
HF-SC6 by Hifonics is a 6-channel High-Low Adapter. It includes a summing function with a MIXED switch, EPS protection circuit, and a floating ground jumper. Auto Turn On, Remote Out, and Start Stop capabilities are integrated. The RCA output is unbalanced and delivers 5 V. The high input is up to 10 V RMS and corresponds to 25 watts RMS at 4 ohms or 50 watts RMS at 2 ohms. The signal-to-noise ratio is 115–121 dB, the THD+N is 0.001%, and the transmission frequency is 5–60 kHz. Designed for connection to car radios up to 50 watts RMS per channel at 2 ohms. Features 6-channel High-Low Adapter Summing function with MIXED switch Auto Turn On Remote Out Start Stop capable EPS protection circuit Floating ground jumper Unbalanced RCA output Compatible with car radios up to 50 watts RMS per channel at 2 ohms Technical Specifications High input up to 10 V RMS (corresponds to 25 watts RMS at 4 ohms / 50 watts RMS at 2 ohms) Output voltage 5 V at RCA Signal-to-noise ratio 115–121 dB THD+N 0.001% Transmission frequency 5–60 kHz
Audio System Z-PCSC 20 to 800W 20mm² Power Cable Masori
283.17 PLN
Z-PCSC 20 to 800W from Audio System is a 20mm² Power Cable set for amplifier power up to 800 Watts RMS. The set consists of OFC with 99.9% copper. Included are 5 m of red Power Cable and 1 m of anthracite Power Cable. A Mini ANL Fuse Holder and a 60 A Mini ANL Fuse are included. Additionally, a 5.0 m Stereo RCA Cable, a 5 m remote cable, and two cable lugs are provided. The included components comprise Z-FH MINI BULK, Z-MINI ANL FUSE 60A, and Z-EVO 5.0M. Features 20mm² Power Cable OFC 99.9% copper For amplifier power up to 800 Watts RMS Pre-assembled cable set Mini ANL Fuse Holder Mini ANL Fuse 60 A Stereo RCA Cable Remote cable 2 cable lugs Technical Data Power Cable: 5 m red Power Cable: 1 m anthracite Stereo RCA Cable: 5.0 m Remote cable: 5 m Conductor cross-section: 20 mm² Z-FH MINI BULK Z-MINI ANL FUSE 60A Z-EVO 5.0M
Musway MPK-BMW2D8 T-Adapter Buy online
554.54 PLN
The MPK-BMW2D8 is a T-Adapter from Musway for connecting a D8 amplifier to a BMW HK Logic 7 sound system. The cable length of the Plug+Play adapter is 0.8 meters. It is compatible with all BMW models equipped with a Harman Kardon sound system or Logic7. The connection is made without altering the sound quality. Features T-Adapter Plug+Play adapter Length: 0.8 meters Compatibility: All BMWs with Harman Kardon sound system / Logic7 Purpose: Connecting a D8 amplifier to a BMW HK Logic 7 sound system
ESX RC-QE DSP accessories with LCD display Shop
851.71 PLN
The RC-QE from ESX is a DSP Accessories in the form of a remote control. The control of the DSP and the audio player is done via a large rotary knob. A large LCD color display is integrated for function display. Compatibility is provided for the model QE812SP. A 5-meter connection cable is included. Features DSP Accessories Remote control with large LCD color display Large rotary knob for controlling DSP and audio player Compatible with QE812SP Includes 5-meter connection cable
ESX QSC15 Damping Masori
810.07 PLN
The ESX QSC15 is a Damping made of ribbed, self-adhesive Quantum acoustic foam. The thickness is 15 mm and can be compressed to 2 mm. The delivery includes 10 panels measuring 700 x 500 mm, which corresponds to a total area of 3.5 m². Features include sound absorption as well as securing loose cables and bowden cables. Features Damping Quantum acoustic foam Ribbed structure Self-adhesive Sound absorption Securing loose cables and bowden cables Technical Data Thickness: 15 mm Compressible to: 2 mm Number of panels: 10 Panel size: 700 x 500 mm Total area: 3.5 m²
Focal-JMlab Inside IW-IMP2.1 Amplifier Accessories Shop
367.26 PLN
Inside IW-IMP2.1 is an Amplifier Accessories from Focal for the 4-channel digital amplifier IMPULSE 4.320. It allows direct connection to two front channels and a Subwoofer. The installation is plug-and-play without changing the original wiring. A direct connection from the amplifier to the original car radio is provided. The connection to the extension cable is made via ISO connectors. Soldering is not required. The length is 0.3 m. Features Amplifier Accessories Manufacturer: Focal Designed for IMPULSE 4.320 4-channel digital amplifier Direct connection to two front channels and a Subwoofer No soldering required Technical Specifications Plug-and-play installation Direct connection from the amplifier to the original car radio Connection to the extension cable via ISO connectors Length: 0.3 m
Hifonics Zeus ZSQ15 Damping Masori
331.94 PLN
Zeus ZSQ15 is a Damping from Hifonics with a nubbed surface. The nubbed foam is self-adhesive and sound-absorbing. The thickness is 15 mm and the material can be compressed down to 2 mm. It includes 8 panels measuring 500 x 370 mm each, with a total area of 1.48 m². Features Damping Nubbed foam, self-adhesive Sound absorbing Nubbed surface Technical Data Thickness: 15 mm Compressible to: 2 mm Number of panels: 8 pieces Panel size: 500 x 370 mm Total area: 1.48 m²
Audio System Z-PCS 35 35mm² up to 1800W 35mm² power cable
406.62 PLN
Z-PCS 35 35mm² up to 1800W is a 35mm² Power Cable from Audio System made of OFC with 99.9% copper. The pre-assembled set is designed for amplifier power up to 1800 W RMS. Included are a Z-FH ANL BULK Fuse Holder, a Z-ANL FUSE 80 A, a 5 m remote cable, and two cable lugs. The 35 mm² OFC Power Cable comes in 5 m red and 1 m anthracite. Features 35mm² Power Cable OFC, 99.9% copper Pre-assembled cable set For amplifier power up to 1800 W RMS Delivery includes: Z-FH ANL BULK Fuse Holder, Z-ANL FUSE 80 A, 5 m remote cable, 2 cable lugs Power Cable: 5 m red + 1 m anthracite Technical Data Conductor cross-section: 35 mm² Power Cable: 35 mm², 5 m red + 1 m anthracite Remote cable length: 5 m Fuse Holder: Z-FH ANL BULK Fuse: Z-ANL FUSE 80 A Cable lugs: 2 pieces
Four Connect S2-TopFlex 6F (500x370) Damping Masori
471.46 PLN
The S2-TopFlex 6F (500x370) from Four Connect is a versatile damping solution. With a thickness of 6.0 mm, the closed-cell foam provides excellent thermal insulation as well as effective sound insulation. The material is flexible and moldable, making it easy to adapt to various surfaces. There are 19 mats available in the size of 500 x 370 mm, covering a total area of 3.52 m². Features Closed-cell foam Excellent thermal insulation Flexible and moldable Effective sound insulation Yield: 3.52 m² 19 pieces of mats at 500 x 370 mm Thickness: 6.0 mm
Four Connect Stage2 20mm² OFC Ultra-Flex Meterware Power Cable
1828.06 PLN
The Four Connect Stage2 Ultra-Flex OFC Power Cable features a cross-section of 20mm2 and is made from 99.99 percent oxygen-free copper. The insulation is made from a silicone-based rubber that retains its flexibility even in cold climates. All STAGE2 cables use a twisted bundle structure to reduce interference from surrounding electronic devices. The strand construction is very finely structured at 0.15mm2 to ensure low internal resistance. The cable is available as bulk material with a maximum length of 50 meters in one piece. It is designed for amplifier power up to approximately 1500 watts RMS and is available in red or gray. Features 20mm2 Power Cable Material: 99.99 percent oxygen-free copper (OFC) Cross-section: 20mm2 Ultra-Flex insulation made from silicone-based rubber Twisted bundle structure 0.15mm2 strand construction Power: 1500 watts RMS Color options: Red or Gray Bulk material (up to 50 meters in one piece)
Audio System HLC2 RTC Power Quadlock 52 High-Low Adapter
363.37 PLN
Audio System HLC2 EM Power Quadlock 52 is a High-Low Adapter with 2 ways and Power Quadlock connector 52-pin. Designed for OEM connections as subwoofer or front output. Length 750 mm to HLC2 EM and 350 mm. Includes Power Quadlock 52. Compatible with models from Audi, Seat, Skoda, and Volkswagen. Exclusively for vehicles without OEM audio system. Features High-Low Adapter 2-way Power Quadlock connector 52-pin OEM connection as subwoofer or front output Technical specifications Length: 750 mm to HLC2 EM Length: 350 mm Audi A1 8X 2010 2018 *OS Audi A1 GB 2018 – *OS Audi A3 8V 2012 2020 *OS Audi A3 8Y 2020 – *OS Audi A4 8K 2007 2015 *OS Audi A4 8W 2015 – *OS Audi A5 8F / 8T 2007 2016 *OS Audi A5 F5 2016 – *OS Audi A6 4G (C7) 2011 2018 *OS Audi A6 4K (C8) 2018 – *OS Audi A7 4G (C7) 2010 2018 *OS Audi A7 4K (C8) 2018 – *OS Audi Q2 GA 2016 – *OS Audi Q3 8U 2011 2018 *OS Audi Q3 F3 2018 – *OS Audi Q5 8R 2008 2016 *OS Audi Q5 FY 2017 – *OS Seat Alhambra 7N 2012 – *OS Seat Arona 2017 – *OS Seat Ateca 5FP 2016 – *OS Seat Ibiza 6P 2015 2017 *OS Seat Ibiza 6F 2017 – *OS Seat Leon 5F 2012 2020 *OS Seat Leon KL 2020 – *OS Seat Tarraco 2018 – *OS Skoda Enyac iV 2020 – *OS Skoda Fabia NJ 2014 2021 *OS Skoda Fabia IV 2021 – *OS Skoda Kamiq 2019 – *OS Skoda Karoq 2017 – *OS Skoda Kodiac 2017 – *OS Skoda Octavia 5E 2012 2020 *OS Skoda Octavia IV 2020 – *OS Skoda Scala 2019 – *OS Skoda Superb 3V 2015 – *OS Volkswagen up! 2016 – *OS Volkswagen Polo 6C 2014 2017 *OS Volkswagen Polo AW 2017 – *OS Volkswagen Taigo CS 2021 – *OS Volkswagen T-Cross C1 2018 – *OS Volkswagen ID.3 E1 2019 – *OS Volkswagen ID.4 E2 2020 – *OS Volkswagen ID.5 2021 – *OS Volkswagen Golf 7 (AU) 2012 2020 *OS Volkswagen Golf 8 (CD) 2019 – *OS Volkswagen T-Roc A1 2017 – *OS Volkswagen Touran 5T 2015 – *OS Volkswagen Tiguan AD1 2016 – *OS Volkswagen Passat 3G 2014 – *OS Volkswagen Arteon 3H 2017 – *OS Volkswagen Sharan 7N 2016 – *OS Volkswagen Touareg 7P 2010 2018 *OS Volkswagen Touareg CR 2018 – *OS Volkswagen Caddy 2K 2015 2020 *OS Volkswagen Caddy SB 2020 – *OS Volkswagen T6 SG / SH 2015 2019 *OS Volkswagen T6.1 SG / SH 2019 2021 *OS Volkswagen T7 ST 2021 – *OS *OS Only for vehicles without OEM audio system
ACV CAN Adapter Universal 01 CAN-Bus-Adapter Masori
342.19 PLN
CAN Adapter Universal 01 is a CAN Bus Adapter from ACV. It converts vehicle-specific digital CAN data into analog signals. Connection via item 42cx10. Inputs: red for +12V constant power terminal 30 and black for ground GND terminal 31. Outputs: pink for +12V ignition terminal 15, orange for +12V lighting terminal 58, white for +12V reverse gear, as well as yellow/green and yellow/red for the speed signal. Suitable for vehicles from Alfa Romeo, Audi, BMW, Citroën, Chrysler, Dodge, Fiat, Ford, Jeep, Maserati, Mercedes, Opel, Peugeot, Porsche, Seat, Skoda, Smart, Toyota, VW, and Volvo. Specifications are available under the vehicle-specific wiring harness numbers. Features CAN Bus Adapter Converts digital CAN data into analog signals Provided signals: ignition, lighting, reverse gear, speed signal Compatible with vehicles of the following brands: Alfa Romeo, Audi, BMW, Citroën, Chrysler, Dodge, Fiat, Ford, Jeep, Maserati, Mercedes, Opel, Peugeot, Porsche, Seat, Skoda, Smart, Toyota, VW, Volvo Optional: vehicle-specific wiring harness Optional accessories available Technical Data Manufacturer: ACV Designation: CAN Adapter Universal 01 Connection: item 42cx10 Input: red +12V constant power terminal 30 Input: black ground GND terminal 31 Output: pink +12V ignition terminal 15 Maximum current ignition: 1.5 A Output: orange +12V lighting terminal 58 Maximum current lighting: 0.1 A Output: white +12V reverse gear Maximum current reverse gear: 1.5 A Output: yellow/green speed signal Output: yellow/red speed signal Specifications: available under the vehicle-specific wiring harness numbers Note labels: * CAN activation OEM sound system; ** vehicle settings supported; *** blind spot assistant not supported; **** vehicles without OEM sound system; ****** vehicles with Magneti Marelli RT3 EV OEM navigation LFB wiring harness 42cx401/42cx402 Ford 32Pin: 42cx11 LFB wiring harness 42cx401/42cx402 Opel 40Pin Quadlock: 42cx21 LFB wiring harness 42cx401/42cx402 Skoda ISO/Mini ISO: 42cx22 LFB wiring harness 42cx401/42cx402 Audi ISO/Mini ISO: 42cx23 LFB wiring harness 42cx401/42cx402 Porsche ISO/Mini ISO: 42cx24 LFB wiring harness 42cx401/42cx402 VAG 40Pin Quadlock: 42cx25 LFB wiring harness 42cx401/42cx402 Mercedes ISO/Mini ISO: 42cx26 LFB wiring harness 42cx401/42cx402 Mercedes ISO/10Pin ISO: 42cx27 LFB wiring harness 42cx401/42cx402 Mercedes/BMW/Porsche Quadlock: 42cx28 LFB wiring harness 42cx401/42cx402 Mercedes Quadlock 2MB: 42cx29 LFB wiring harness 42cx401/42cx402 Citroen/Peugeot 40Pin Quadlock: 42cx30 LFB wiring harness 42cx401/42cx402 Volvo S60/V70 12Pin/12Pin: 42cx33 LFB wiring harness 42cx401/42cx402 Ford 40Pin Quadlock: 42cx35 LFB wiring harness 42cx401/42cx402 VAG 52Pin Quadlock: 42cx38 Accessories: active system adapter Audi/VW Quadlock MQS-insert loose: 13-1424-25-0 Accessories: E-Call maintenance Mercedes Sprinter/V-Class loose: 1424-27-0
Four Connect Stage2 20mm² OFC Ultra-Flex Meterware Power Cable
48.92 PLN
The Four Connect Stage2 Ultra-Flex OFC Power Cable features a cross-section of 20mm2 and is made from 99.99 percent oxygen-free copper. The insulation is made from a silicone-based rubber that retains its flexibility even in cold climates. All STAGE2 cables use a twisted bundle structure to reduce interference from surrounding electronic devices. The strand construction is very finely structured at 0.15mm2 to ensure low internal resistance. The cable is available as bulk material with a maximum length of 50 meters in one piece. It is designed for amplifier power up to approximately 1500 watts RMS and is available in red or gray. Features 20mm2 Power Cable Material: 99.99 percent oxygen-free copper (OFC) Cross-section: 20mm2 Ultra-Flex insulation made from silicone-based rubber Twisted bundle structure 0.15mm2 strand construction Power: 1500 watts RMS Color options: Red or Gray Bulk material (up to 50 meters in one piece)
Masori B1035S 10 inch subwoofer enclosure Masori
685.18 PLN
B1035S is a 10 inch (25 cm) subwoofer enclosure from Masori. The enclosure volume is 35 L. Made from MDF with a material thickness of 18 mm. The dimensions are 465 x 360 x 345 mm. The maximum installation depth is 210 mm. The hole diameter is 232 mm and the maximum subwoofer outer diameter is 265 mm. Bass tunnel 70 mm/200 mm. Color black mélange, Made in EU. Features 10 inch (25 cm) subwoofer enclosure Made in EU Material MDF 18 mm Enclosure volume 35 L Speaker size 25 cm (10 inch) Color black mélange Technical Specifications Dimensions 465 x 360 x 345 mm Maximum installation depth 210 mm Hole diameter 232 mm Maximum subwoofer outer diameter 265 mm Bass tunnel 70 mm/200 mm
ACV LFB Ford 8Pin/6Pin yellow steering wheel remote control Masori
342.19 PLN
LFB Ford 8Pin/6Pin yellow is a Steering Wheel Remote Control from ACV. Analog with connection 8 Pin/8 Pin Ford Plug as well as LFB 6 Pin Plug yellow with loose cable at Pin 2 (bl/br). Provided signal: Steering Wheel Remote Control. Suitable for Ford Galaxy I (WGR) 04/2000 - 05/2006, Ford Mondeo II (BAP/BFP/BNP) 06/1996 - 09/2000, and Ford Scorpio II (GFR/GGF/GNR) 01/1994 - 09/1997 as well as 09/1997 - 06/1998. Connection cable for the following radio manufacturers: Blaupunkt/China HU/Kenwood 42k-000, Multilead various devices 42k-025, Alpine 42k-100, Blaupunkt/Kenwood/Pioneer 42k-300, XZent/Zenec 42k-400, Sony 42k-600, Kenwood 42k-700a, Clarion 42k-800, JVC 42k-900. Features Steering Wheel Remote Control Manufacturer: ACV Analog Connection: 8 Pin/8 Pin Ford Plug Connection: LFB 6 Pin Plug yellow, loose cable Pin 2 (bl/br) Provided signal: Steering Wheel Remote Control Technical Data Suitable for: Ford Galaxy I (WGR) 04/2000 - 05/2006 Suitable for: Ford Mondeo II (BAP/BFP/BNP) 06/1996 - 09/2000 Suitable for: Ford Scorpio II (GFR/GGF/GNR) 01/1994 - 09/1997 Suitable for: Ford Scorpio II (GFR/GGF/GNR) 09/1997 - 06/1998 Connection cable compatible with: Blaupunkt/China HU/Kenwood (InCartec 42k-000) Connection cable compatible with: Multilead various devices (InCartec 42k-025) Connection cable compatible with: Alpine (InCartec 42k-100) Connection cable compatible with: Blaupunkt/Kenwood/Pioneer (InCartec 42k-300) Connection cable compatible with: XZent/Zenec (InCartec 42k-400) Connection cable compatible with: Sony (InCartec 42k-600) Connection cable compatible with: Kenwood (InCartec 42k-700a) Connection cable compatible with: Clarion (InCartec 42k-800) Connection cable compatible with: JVC (InCartec 42k-900)
Focal-JMlab Inside IW-NIS-Y-ISO Y-Adapter ISO plug Shop
188.92 PLN
Inside IW-NIS-Y-ISO is a Y-Adapter from Focal with plug-and-play installation. The adapter is compatible with the Focal IMPULSE 4.320. It allows for the direct connection of an amplifier to the original car radio. The connection to the extension cable is made via an ISO connector. Soldering is not required. The length is 1 m. Features Y-Adapter Plug-and-play installation Compatible with Focal IMPULSE 4.320 Direct connection of the amplifier to the original car radio Connection to the extension cable via ISO connector No soldering required Length 1 m